Knitting from sectional yarn knitting needles is not so complex as it seems at first glance, the main thing is to accurately perform all the stages of the described description.
We suggest you link the cute shortened jacket with a removable collar.
The description is given for size 36. In the event that you need a different size, then you need to make appropriate changes.
We will prepare for the work of about 700 g of sectional yarn, knitting needles No. 4.5 and No. 5.5, one additional needle, three buttons of the corresponding size and color.
The bar knits with a rubber band 2x2. To knit the main rubber band, it is necessary to knit 6 facial hinges with the front side of + 2 irons = to the end of the row. From the wrong side, all hinges knit in the drawing.
The product is used in a spit pattern, 8 and 6 loops width.
Spit on a width of 8 loops: I - IV Rows: The front rows are knitted by facial loops, involving - involnery, V row: Crossing the loops - 4 loops are removed on an extra needle, four from the spokes on the left, then removed loop, VI - x rows With the front side, all hinges knit faceted, with the wrong - involnenny.
The pigtail in 6 loops fit in the same way, only on an additional needle should be left three loops, after which three are inserted from the knitting needles, and they are already removed behind them.
Knitting density should be observed: 16 loops x 21 row = 10x10 cm.
Knitting the product is carried out across and starts on the right sleeve. On the spokes number 4,5, we gain 38 loops and insert the bar of the facial row, the edges are argued with facial loops.
After the bar need the needles number 5,5, which knit elastic. The row should be performed with six facial loops, including the edge, then 2 of the wrong and 6 facial.
To perform spaces of sleeves, it should be added from two sides in the seventh row 1 loop + seven times one loop in each sixth row + eight times in every fourth row = 70 loops.
Article on the topic: How to decorate the glasses with your own hands
When the product is associated with a height of 43 cm, at the end of the row from the wrong side, you must dial 74 loops to connect the right shelf = 144 loops.
Next, there is a facial row, in which there are 8 facials for a spit pattern by 8 hinges + 2 is broken. + 6 persons. For a spit pattern by 6 loops + 2 is elevated. + 6 persons. + 2 is elevated. + 6 persons. For a spit pattern by 6 loops = 32 loops, the remaining 74 hinges knit with a rubber band, and at the end of this row should also dial 74 loops = 218 loops.
Then there is an invalid row, which begins with 8 events. Loops for a spit pattern by 8 loops + 2 persons. + 6 is elevated. For a spit pattern by 6 loops + 2 persons. + 6 is elevated. + 2 persons. + 6 is elevated. For a spit pattern by 6 loops. + 154 gum.
In III, a row of spit crosses as described in the description.
When the product reaches fourteen centimeters (30 rows), how new loops were dialed, it is necessary to check the 94 shelves on the right, after which they can be postponed. To form a neckline of the neck should close 15 loops.
Now there are 109 loops in the work, which continues to work on the reversing back.
When the product reaches a height of 13 cm (28 rows) after the neck, 94 loops should be postponed after the eighth row of the spit pattern. Pending loops are designed for the right shelf, in the plank which should be performed by the holes for buttons: in the fifth row from the beginning of the neck, the eighteenth and twenty-eighth.
When the product reaches a length of 27 cm (58 rows) from the beginning of the shelter, we take the knitting needles №4.5 and insert two rows of the plank, after which all loops are closed.
To connect the shelf on the left follows the knitting needles No. 4,5 to dial 90 loops and tie two rows of the plank.
The following rows will use the knitting needles No. 5.5.
In III, a row should be associated: 6 facials for braids of 8 loops and two more crossed facial from the transverse filament + 2 Point + 6 facials for braids from 6 facial + 2 Pouring + 6 facial + 2 Pouring + 6 facial to spit from 6 facial + 60 Elastic + on the last two hinges knit two crossed loops on the transverse thread = 94 loops.
Article on the topic: Snow Maiden Crochet: Master Class with Schemes and Description
When the product is accumulated by 27 cm (58 rows) from the plank, then at the end of the front row, you need to dial 15 loops to connect the neckline. Together with scored loops, I have 109 hinges for the back = 218 loops.
When the product is accounted for 41 cm (88 rows) from the beginning of the back, the closure of 74 loops should be closed on both sides. As a result, 70 loops for knitting left sleeves will remain.
When unscrewing the sleeves, it is necessary to perform spaces, for which it is closed from two sides in the eighth row one loop + seven times one loop in each fourth row + eight times one loop in each sixth row = 38 loops. When the product is associated up to 42 cm from the start of the sleeve, you need to go to the knitting needles No. 4.5 and tie two rows of the plank. Close the remaining loops.
To collect related parts, you should sew the sidewalls of the main part of the product and sleeve. To connect the neck cutout, you will need a knitting needles №4.5, which should be associated:
- horizontal edge of the shelf on the right - 22 loops;
- closed edge - 16 loops;
- neck from the back of the back - 22 loops;
- set of edge - 16 loops;
- Horizontal edge of the shelf on the left - 22 loops.
Tie three rows of the plank, after which the loops can be closed. You can enjoy the sewing buttons.
Separately, the knitting of the collar is performed, for which 38 loops are recruited and the plank fit, with the addition of four crossed loops after the first and second loop, as well as after each of their two latter = 42 loops.
Knitting further continues with a rubber band, starting with 8 facial and 2 irons, continuing 6 facial and 2 irons. In all invalited rows of hinges are written by purl.
Cross in the spit pattern goes in the fifth and later in each tenth row. When the sixth row will be played, you should perform a hole for the planned button.
Article on the topic: Knitting Tunic Dresses for Full Women: Scheme with description
When the collar is associated up to 65 cm, then through three rows after the last crossing, one inextricular row should be kept, in which two loops are in the beginning and at the end of the row.
As a result, there were 38 hinges, on which there are four rows on the plank, after which the loop can be closed.
On the collar, you should also sew one loop.