How to wash the shower cabin and remove the flare from the glass

Anonim

Recently it has become fashionable to use shower cabins instead of baths.

How to wash the shower cabin and remove the flare from the glass

Choosing a shower cabin, it is important that it is harmoniously combined with the rest of the apartment or at home and approached the size of the bathroom.

But on the windows of the shower booth over time, raid is formed, the cause of which is bad water, soap and skin fat. Naturally, any hostess worries the question than laundering a shower cabin and remove the flare from the glass.

In order to wash the shower, you can use various cleaning gels, it is important that they do not contain caustic substances that can spoil the surface of glass or polystyrene.

Fools for washing of shower cabins

Shower cabins can be divided into two types. To one belongs to those manufactured from hardened safe glass, which are transparent, matte and tinted. They are easy to wash, and over time they do not lose their appearance. With booths that have a special anti-plated cover, there are no problems. To the second type K belongs to showers from polystyrene. They begin to curb after some time themselves. The dried water drops form a fler on glass, which is very difficult to wash. For such showers, the Tilex-Fresh Shower means is suitable, which is good. It must be used as soon as they installed the cabin, and spray, without flushing, after using the soul. For other cabins, such special cleaning products are manufactured: "Orofresh", "M. Muscles, "Delu", "Luxus". But it is possible to use other cleaning gels and sprays. It is important to remember that it is impossible to use powders containing coarse abrasive particles that can spoil the surface of the plexiglass and acrylic.

Normal cleaning of shower cabins

The following materials will be needed for washing the cabins:

Article on the topic: Skuring walls after putty

How to wash the shower cabin and remove the flare from the glass

Montage shower circuit

  • Toothbrush;
  • sponge;
  • Cleaning sprays and gels;
  • lemon acid;
  • vinegar;
  • means for glasses and mirrors;
  • spray.

After you purchased detergent liquids and powders, you can start directly to cleaning. First, you should moisten the walls with warm water and apply a cleaning gel on a soft sponge. Next you need to clean the shower cabin from all sides. After some time, all the washed walls rinse with water. To remove contaminants in hard-to-reach places, you can use an old toothbrush. It is not necessary to rub much so that microcracks do not appear. The means should be flush as carefully, otherwise white divorces can remain on the surface.

When the fungus or plaque is appeared on the walls of the cabin, they must be treated with a weak chlorine solution. Then the walls should be well rinsed with clean water and rub with a dry cloth, and the room is good to ventilate. To impart brilliance, you need to take a soft towel and, in shaking it with liquid for glasses and mirrors, wipe the shower cabin on all sides. Thus, all divorces remaining left after washed, as well as the walls will be protected from dust.

Cleaning with lemon mortar

Wash the walls of the cabin for the shower can be used by citric acid. It is necessary to prepare a solution of citric acid (10 gr) and 100 ml of warm water. Pour the solution into the spray gun. Spray the composition on the walls and leave for 10-15 minutes. When the last time passes, wipe the surface with a sponge and washed with warm water. If some part of the deposits remained, it is necessary to increase the amount of citric acid. To do this, it is not necessary to take one, but the two packets on the same amount of water. Lemon acid can be replaced by vinegar, taking 20 ml of vinegar and 100 ml of water.

Article on the topic: Universal and special polymer putty to repair at home and car

Caring for acrylic hydromassage shower cabins

For hydromassage acrylic cabins, the use of powders not described in the instructions offered to them are prohibited. Cleaning the acrylic surfaces is made using a sponge moistened with a small amount of the appropriate means. In detergents there should be no abrasive components. In order for the walls from acrylic to retain glitter, you can grasp them with a wax polishing with a soft tissue. If you clean the acrylic shower cabin with detergents containing abrasive substances, it can hang out. You can not use to clean the acrylic:

  • washing powder;
  • means that contain acetone or ammonia;
  • Tools that contain formic acid or formaldehyde.

Removal of resistant spots and plaque can be produced by liquid detergents, silver polishing or toothpaste, it depends on the type of spot. The stain should be wiped with a soft cloth. To remove spots from scale, you can take advantage of lemon juice or vinegar, smile in it soft tissue and rubbing the surface of the cab.

For conventional cab wash the acrylic surface, you need to wet the detergent and leave for 5-10 minutes. Then wipe with a sponge and rinse with water. If there is a need to repeat the processing.

Cleaning shower cabins should be made at least once a month. If the cabin carefully care and apply special tools for her wash, then care for it will not be much trouble, and it will last for many years.

Read more