Opening the door seems to be an exceptionally simple: insert the key, turn out and access to the apartment is open. In some cases, it is enough to make a plastic card with a code or identify a fingerprint. However, there is always a situation when the door lock has jammed, and there is no possibility in the housing.
Jammed door lock
What to do in such a situation?
Causes of trouble
Open the entrance door when locking the lock or the sash itself can be in different ways. This dependent on the complexity of the locking mechanism, from the cause of the lock and character of the sash: to knock out the iron door at the entrance to the dwelling is much more complicated than the usual wooden.
The breakdowns are possible both in expensive devices and cheap. The most common belongs are as follows:
- Mechanical damage - for example, breakdown and swing the key, jamming the moving parts in the absence of lubricant and so on. Some of them can be eliminated independently and still open the front door. For the repair of others, specialists will need;
- factory marriage - it is necessary to call not just specialists, but representatives of the company producing lockable devices;
- Invalid operation mode - no cleaning, lubricant, sharp slamming, lead to partial wear of certain elements of the mechanism, which is why the key encourages. As a rule, such malfunctions are eliminated independently;
- Schedule or sash skew is a problem solved only by specialists. Reinstall the iron entrance door with their own hands;
Dissotion door
- Improper block installation - again dismissed independently.
It is worth noting that if a truly complex castle ripped on the entrance door, which suggests several degrees of protection, open the door itself will not succeed at all desire. In order not to aggravate the situation, it is necessary to call the company's specialists.
Call Master
Incorrect operation
The key at the same time is with difficulty inserted, not turning or not even inserted to the end. Do not "insist" and try to turn it: extract the fragments more difficult than trying to get into the dwelling.
- First of all, you need to smear the jamming castle. It is used for this universal spray WD-40, which can be found in the nearest farm store. As a lubricant, any machinery or kerosene can also be used.
Article on the topic: Greenhouse from the film with its own hands: cheap and practical
Spray WD-40
Enter it with a syringe into the keyhole. In the photo - lubrication of the locking device.
Lubrication of the locking device
After processing, the key is inserted into the well and are trying to rotate several times without performing traffic to the end.
On the key, you can slightly tapping, but neatly, as a rule, after several attempts, when the lubricant applies, the mechanism opens.
- The garbage is stuck in the lock - wreckage of matches, small litter, can be detected using a flashlight or mobile phone. When foreign objects are found, the latter are extracted by conventional tweezers. Instead of tweezers, you can use a wire or a rigid metal brush.
- The key left on the other side, interfracting to get into the apartment, you can pushed out a pailer, pin, hairpin.
Blocking the locking mechanism
What if you jin castle in the door during the key turnover? This option is possible when the dirt is accumulated in a larger or stagge. In the latter case, the handle turns, and the tongue remains fixed, as it is jammed. Accordingly, the sash cannot be discovered.
- The universal solution of such a problem is the pressing of the tongue. Use metal ruler, knife blade, plastic card. The item is inserted into the gap between the door web and the frame as close as possible in order to hook the far edge of the tongue. If it succeeds, the line pushes a tongue from the groove, putting some effort. On the video shows opening the entrance door when the lock is jamming.
Breakdown of the locking mechanism
In this case, you can get into the apartment, only possessing special skills. The only available method is the drilling of the mechanism. If you manage to get the desired tool and if there are appropriate skills, you need to remove the decorative bar and drill the larva.
The door does not suffer from this, but the locking mechanism will need to be changed.
In some cases, you can knock out a cylinder with a hammer, and then with the help of a metal hook to move the riglels. However, it is possible only with some models. If the Suwald Castle jammed, for example, it is better not to try to open yourself.
Article on the topic: Self-adhesive wallpapers for the kitchen