Video camera RM116B.
Posted next to the backlight of the rear license plate. The camera is "recessed" in the bumper, inconspicuous!
Probably the easiest way to place the camera on the plastic platform between the rear-number lighting lamps. But here the camcorder will be more noticeable hanging on the background of the white room.
I decided to install the camera a little deeper, the benefit right above the bumper number is installed "ramp" holding the rear-number lighting lamps, which can serve as a good camera holder, fasteners will be hidden and do not have to breathe bumper. To do this, we free the trunk, remove the frame with the number, unscrew the 2 screws on the sides and pull out the piston.
Take out through the left hole, whatever the length of the wire.
So she is in the position in which it is installed in the bumper (on the photo indicated the place in which the additional hole was drilled for the attachment, as the second hole was used to be finished from the ceiling).
Because This ramp is installed too deeply, it is necessary to lengthen the camera's leg slightly, I attached a camera on a metal plate ~ 3x5cm, which in turn fixed on the ramp. Such installation allowed a little to lower the camera from the bumper, as well as the possibility of adjusting the position and direction of the chamber in any direction.
Drills a hole, try, screw and install everything in place (in this place got carried away and forgot about the fotik)
It turns out something like that
Camera wire stretch into the luggage space through any plug in the spray area / rear bumper
Next, the creative part ends and the connection and tedious broach of the video signal and "+" from the reverse lamp to the magnetol through the entire salon begins.
To do this, remove the decorative lining of the trunk threshold, the left trunk ligation, the seat and preferably the back of the rear seating, the driver's and passenger thresholds on the left side, the decorative triangle in the driver's legs, the beard cladding, giving access to the rear connectors of the radio, and also removing the small glove box and unscrewing 2 self-pressing remove this lining at the wheel
Article on the topic: Narcissus from corrugated paper with their own hands with candy
"+" Is taken from the left rear headlamp, namely white with a red stripe wire, which comes from the lamp. I took the "+" a little further from the green with a white strip of the wire (you can trace the wires), which would be less noticeable interference.
You can also find "+" reverse in the torpedo area.
Gently slowly stretch the wires along the threshold, we use regular clips and fastenings ... Install and collect everything back in the same order ... Ready!
The direction of the camery has not yet regulated, because She somehow rose right away, perhaps later. The viewing angle is only 120 degrees.
Further, for clarity, examples of the operation of this camera (the image on the magnetic screen is actually like a clearer than was able to fix the fotik):
1. Video parked Kosos, not along the border, because The first time is not familiar to look into the monitor, and not in the mirrors ...
2. a) inside:
b) outside:
3. a) inside:
b) outside:
4. A) inside:
b) outside:
5. A) inside:
b) outside:
Those who doubt whether to set the reversing chamber or not, I will say unequivocally - to put. I think that even cheap chamber will bring you a lot of use, because the main thing is not even an angle of review (although this is also a undoubted plus), but to see the remaining distance for example, before the bumper standing behind the car!