To rest in the steam room, high-quality shelves will be required, allowing you to safely relax in the bath, raise yourself the mood and gain strength. At the same time, with the shelves, all the requirements for the manufacture and installation of wood shelves should be observed.
Shelves in the steam room must be made of high-quality moisture resistant wood.
This type of construction will be subjected to hard microclimate steam, which will require the choice of appropriate wood, allowing to make all products. Shelves do not require special efforts in their manufacture.
Recommendations on the device shelves for bath
The shelves can be installed in the bath in the amount of two elements, one of which is a support rack made using a thick bar. Another element will be, respectively, the seat. This design will be a standard shelf. Its supporting rack will consist of two beams, which are installed, taking into account the size of the width of the shop. They are connected by jumpers every 0.5 m. Make the shelves with a special carcass from the tree, which will take more time than the manufacture of ordinary shelves in the steam room.
The height of the ceiling and regiments for the family pair.
The reference rack should have a frame that you want to fill a row of thin boards, getting a gap between them up to 2 cm. In the manufacture of the seat is taken into account, which should provide the best flow of water. The main complexity in the manufacture of shelves for the bath is the selection of the fastener. Safety is needed here, since the bath visitor can get a burn about hot metal screws or nails, if it comes to them.
The choice of the correct sizes of the shelves involves the knowledge of the following main points:
- Making the shelves for the bath, take into account their standard sizes, which should be from 40 to 60 cm;
- If there is a minimum bench length of about 1.5 m, then the upper shelf or step is made spacious, that is, about 90 cm;
- If the length of the shelf is 90 cm, then this is the optimal option for the seat, and for lying with bent and elongated legs, the shelves are 150 cm long and more than 180 cm;
- If the bench will have a length of 95 cm, it will allow it to sit on it, stretching both legs and raising them.
Article on the topic: Device veranda with balcony in the house
To determine the height of the shelves, it is used lying or sedentary arrangement of a person. It is taken into account before making the shelves. Therefore, the upper shelf and the ceiling must be 1.2 m from each other. This distance should allow you to enjoy inhalation of hot air.
The upper shelf usually set one level with the door in the top of the heater. A distance of about 60 cm can be provided between individual tiers of the shelves. The shelves and benches in the bath can have a different shape, they can be given a laying of a focus with a focus for the head, provide back.
How to position the shelves in the bath?
Options for regiments in the bath.
Shelves are usually located along the walls where windows are not provided. The distance from the floor to the shelf can be about 2-3 tiers. Often the shelves or shops for the parillas are made in the form of steps, with an increase of which there is an increase in temperature in the steam room. This is provided for visitors who have different preferences for temperature level in the steam room. On the shelf below the lowest temperature, and on the top is the highest.
If the bathroom is more spacious, then this type of placement of the shelves will be perfect. If the choice is stopped at the layout of the shelves in the form of the letter "g", then the lower and upper shelves must be placed near the same wall, and the average is placed on the opposite side.
The option "coupe" provides for the presence of only two shelves adjacent to the same wall belonging to the upper and lower level. The structure of the shelf can be comfortable in terms of fixing near the wall after raising the shelf. It will be the perfect choice that allows economically use the bathroom. It is possible to equip the collapsible structure of the shelves, as it allows you to disassemble the shelves for their subsequent drying on the street.
How to choose the right wood for the manufacture of shelves?
The surface of the shelves must be perfect, because the human body comes with it, its skin. For the manufacture of the shelves for the bath, a special scheme is provided, which involves the choice of a suitable material. The tree must have the following list of characteristics:- Low thermal conductivity.
- High density structure of fibers.
- Lack of resin substances in large quantities.
- Moisture resistance.
- Turning resistance.
Article on the topic: Hauling fabric on ironing chalkboard with your own hands
Shelves for a bath.
You can consider three main wood species, which is most often used for the manufacture of shelves for Parims: Osin, Lipa, Abashi.
Linden wood has many important properties that are ideal in the manufacture of shelves in a bath. Due to the use of linden in the bath, unobtrusive aroma hauls a healing effect. This type of wood is easy in the process of processing, since it does not have flaws and bitch. It not only heats up slowly, but also does not crack. In the bath there will be no sweat of sweat on the surface of the shelves from the linden.
Wood Linden is able not only to improve well-being, but also to give a positive energy to any visitor to a positive energy, restore their strength. The acquisition of linden in building materials stores is not associated with large spending, since the price of the lime board is accessible. The only disadvantage of this breed is the loss of the primary shade board and the darkness surface darkening.
If used aspen, then its impact on the body will be healing, like the linden.
Phased process of manufacturing shelves for the steam room.
Osin recommended to use for shelves. Aspen shelves will create an alignment situation with relief, soothing mental alarms. This type of material is popular as Lipa. The invisible process of internal rotting of the boards represents a lack of this tree breed.
The use of the African wood tree called Abashi allows you to provide a fresh bantle shelves. Abashi has various useful features. This breed is heat and moisture-resistant. Since it heats up very slowly, then the shelf of Abashi will not give up. The tree has increased endurance, many different positive qualities make this breed inaccessible due to its high price.
How to make the shelves for the bath?
For the manufacture of beautiful shelves, you can use boards with a rounded edge form. The product itself should not be shaky and creamy. To make it easy and convenient to air the room better make the shelves from below open. For the manufacture of shelves, flooring is used from boards, taking into account the gap, which can be left equal to 20 mm.
Designing bunk regiments in steam room.
You can take a different number of shelves on top and bottom, for example, to take 7 pieces, and down - only 3. Special oak wedges are used to connect all composite elements shelves. They should be scored in the prepared holes provided for in the joints of the joints. If screws are used as a fastener, they are inserted from the back of the product or combed in the board.
Article on the topic: Selection and installation of the threshold in the bathroom
The lower shelf necessarily make a movable, which makes it easier for it and ventilating the bath. The shape of the shelf from below can resemble a triangle having a part of two adjacent walls. The use of such a shape of the shelf saves more space and allows you to make a more compact.
Shelves are located at different levels, and the space between them remains open, but you can also make back, scoring all the holes between the steps. The ventilation holes are necessarily provided. Coniferous boards can be used to create in the bath of therapeutic atmosphere.
How is shelves for protection?
Unprocessed special chemistry wood is not protected, so it can quickly come into disrepair. This is due to the presence in the bath of wet air. The first signs of this violation of the useful functions of the tree are associated with the appearance of mold with rot. Therefore, it should be thought out in advance all preventive measures before using wood.
The layout of the regiments and the attack in the steam room.
It is strictly forbidden to use the shelves to cover the shelves in the bath of various chemicals, such as varnish or olifa, which contribute to the release of a sharp unpleasant odor. Couple coming from such tools is an allergic reaction pathogen.
For pariots, a natural impregnation is acquired, created using natural oils that contribute to the creation of a protective film. This composition is capable of withstanding moisture with maximum efficiency, protecting the shelves from damage. This type of impregnation is used to cover the bench, and the floor is covered with a reinforced mixture, which is not able to highlight the unpleasant odor and dangerous for the health of the pair.
Proper shelves' care
The bath should always remain clean, so it is necessary to monitor the hygiene indoor pair. Due to high temperatures, the steam room can completely get rid of microbes and bacteria, but dirt must be removed. Since the sufficient amount of sweat is distinguished from the body of a person, then it is periodically washed from the shelves in the steam room.
When cleaning the shelves, modern cleaning products should not be applied. The cleanliness in the room should be made solely using the utility soap. If the pollution is strong, then the mechanical cleaning of wood is organized using an abrasive material.