Some knitted things involve maintaining extensibility on the edge of the product. As a rule, all elastic bands, framing the neck, sleeves and bottom of clothes associated with the needles are performed by good spring viscous. So that the gum does not lose the main properties and performs its function qualitatively, it should be properly completed on the product. In this case, the elastic closure of the loops can help, which can be performed in several ways.
For knitted web
Often when closing the loops in the product made by the face, the region is subject to unwanted tightening. To this not happen, the method of elastic closing of the loops should be applied.
To do this, the first loop moves to the left needle.
Then the Nakid is carried out. The next loop is performed in accordance with the scheme of the specified pattern.
The left needle comes to the nakid and the first loop on the right spice.
Through them with the right spin, the loop was displayed, previously acclaimed by the pattern of the pattern.
The procedure is repeated until the end of the work. At the same time, it is desirable to pay attention to the density of the Nakid and monitor the uniformity of the line. If the sequence is done correctly, then a neat stretching "pigtail" is formed on the face side.
Knikota seam
The edges of the gum 1 × 1 will look most presentable, if you close the hinges with knitted seam. The method is applicable to the treatment of socks, cuffs, caps, nose of sweaters.
This method is suitable for beginner needlewomen, since additional two needles are used here, allowing to track work on each loop. At the same time, the chance of losing any loop is almost minimal.
To work, you will need:
- An open edge product (knitted);
- Needle with a big ear;
- Two extra needles with sharp ends.
Before starting the direct closure of the loops, it is desirable to plunge two rows with a hollow elastic band in order to increase its density.
Article on the topic: Weaving from gum Lumigurum for beginners on hook with video
Two spokes are taken to which loops with basic spokes are carried out. At the same time, the facial loops are thrown onto one knitting, and on the other - invalid.
The working thread is cut down for a length equal to the width of the product along the loop line to be closed multiplied by three. The end of the thread is inserted into the needle. The needle, passing down from top to bottom, faces the first loop of the facial row and returns to the bottom, clinging the second facial loop.
Through the hinges shot in this way. It is not necessary to delay it.
The work moves to the wrong loop. The first loop is removed by a needle.
The next loop should pose a needle opposite movement - from myself.
Through the loops spend a working thread, without tightening them. With the needles with facial loops, the next loop is removed, connecting already with a previously removed loop.
To do this, the needle captures the removed loop, and then introduced under the loop on the height of the movement towards himself.
Thread stretches through two loops.
Thus, the invalid and facial loops begin to form a single seam. According to the same principle, the removal of the initially purged loop and the one is united, which is still on the needle.
The work continues with alternating the removal of facial and invalid loops.
In order for the seam to be accurate, you need to pay attention to the uniform unlightly tightening the working thread after each loop removed.
With elevated elasticity
As a rule, active stretching of the product involves using a more dense and elastic rubber band. Excellent copes with the task of 2 × 2 gum.
In order to preserve its elasticity, the edge seam should be processed correctly. Close down 2 × 2 gum hinges. It is most convenient with a tapestry needle (since it has an increased ear).
When the knitting of the product came to an end, you should measure a certain length of the working thread (the width of the edge with open loops, enlarged 5 times) and cut it off. The free end of the thread is taught in the needle. Work on closing the loops begins with the front side of the product. The needle is introduced into the edge and first loop.
Article on the topic: Plaid "Mermaid Tail" Crochet with Schemes and Description
Then it should be a little bend the rear side of work to yourself so that it is convenient to work with the wrong out. Two hinges are also picked up from the wrong side: the first and third. The working thread is stretched, and the needle is already involved in conducting the second and fifth facial loops.
Picking them, it returns to the invalid side, where the third and then the fourth wrong loop is cling. The thread goes back through the loop.
Seam slightly subject to tension. It is not worth it to delay it, because you need to keep the evenness of the edge of the product and not spoil the function of good extensibility.
Actions continue to pick up needles of the subsequent two facial, and then the wrong loops. This is how an elastic cant is formed, beautifully framing the edge of the product.
Video on the topic
Actual video demonstrates the most successful ways to closing the loops to create an elastic edge when knitted on the knitting needles.