Everyone as a child knew how to make paper ships, even let them down on the spring streams, looking with the delight, as they rush to rush, fascinated by cheerful water. It's time to convey this skill with children and grandchildren, so that they also enjoy the sight of their own ship floating around the water. For those who managed to forget how this is done, this article is written, with schemes, photos and video materials. Tell me in this all step by step instructions, how to make a boat from paper.
First in life ship
This is the easiest and most life memorable experience with a sheet of paper.
To create a sailboat, need a sheet A4. With the help of the scheme below, you can easily build such a boat with your own hands.
The sheet bends in half and is again inflicted, forming a longitudinal fold. Both halves add up to the same side, forming two more folds. Now you need to add and tightly press two halves to the central line, and outline three longitudinal folds: 1 in the center and two, which dividing both half in half.
Bottom corners are turned outward, forming a trapezium. Similarly, the upper corners are turned out. It turned out the ship on the boat, as if reflected in each other. Next, the corners of the top boat are turned upwards, as shown in the diagram.
It remains only to bent into half the upper part of the sailboat and can be sent to swim.
If the child will look at how the boat is done, it will soon begin to create more complex toys from paper.
From the boat to the steamer
After they have mastered the initial origami lessons, you can replenish the fleet by more powerful ships. Below is a scheme, as a phased to make a two-pipe ship.
To build such a ship, you need a square sheet of paper, which consists on the longitudinal lines of corners to the center. The workpiece turns over and the angles to the center are bent. After that, the billet turns over again, and the angles will bend for the third time. Of the four received squares, you need to break two, located opposite each other, and raised the resulting corners. It remains to connect two pipes, and the steamer is built.
Article on the topic: Bears from Papier Masha and Coffee Beans
But this is the initial, so to speak, the kindergarten level of skill on the construction of ships from the paper sheet. Here are pictures showing which paper ships are shown.
They can be very large:
Romantic:
Legendary:
Fabulous:
Edible:
Cruise ships:
Military:
A little about models
To build such a military cruiser with two tubes, you will need not only the ability to bend correctly and blends paper.
Here you need to be able to read the drawings, the ability to work with small details, the basic concepts about the ships and the love of modeling.
In the meantime, it did not reach this, you can build a whole flotilla from the shipment.
Or arrange racing on sailing boats.
You can add a small pleasure boat to the home flotilla. The scheme of its manufacture:
A sheet of paper is bended diagonally, then the upper angle wraps inside. The same angle should be turned outward, but so that it seems to be drowned in the rest of the workpiece. The top tip is needed to "drown" in the top of the triangle. Next, the blank is folded in half, and the lower edges are turned outward, forming a boat board.
In the process of manufacture, it is important to carefully stroke the paper in places of bend and try to put the craft of smoothly, otherwise the boat will turn out to be curves.
If everything is done correctly, it will turn out such a boat:
Video on the topic
The simplest boat:
Punt:
Powerboat:
Boat:
Sailboat:
Two-pipe steamer:
Canoe: