So that the New Year's backlight creates the holiday atmosphere, it is important that the garlands are aesthetically fit into the architecture of the structure. As the designers emphasize, it is advisable to beat the most outstanding elements, such as windows or an entrance group, the lights look perfectly on the roof, the oops of the roof. The previously planned project will make it possible to more accurately calculate the necessary metrah of the garland.
Types of street garlands
On the profile market you can find the following groups of backlighting:
- LED icicles
- Light curtain,
- Cords of continuous glow,
- bchroma
- Garlands based on a waterproof cable.
Glowing cords are considered the easiest solution, they have a PVC-founded-based location, the conductive tracks with LEDs are laid into it.
On a note! The device of garlands-fritters is consonant with its name, hanging backlight may have the shape of suspension, threads, cords. In the case of a luminous curtain, the threads are longer, they can reach 100-150 cm.
LED icicles create imitation of melting drops, they are optimal in the case when the backlight will be considered from afar. The solution looks beautiful, if you raise garlands with a minimum distance from each other.
Garlands on the waterproof cable are equipped with lamps with an equal step. As a result, a luminous composition with imitation of running fire is formed. The model attracts minimalist execution, characterized by durability and high level of reliability.
Subtleness of the choice of facade garland
Illumination elements must be consonant from the point of view of color temperature. If the power of the bulbs is kept in the range of 2.5-3 thousand Kelvinov, the warm light is formed, the rest of the design must also be constructed in the warm gamma. Cold mood creates light bulbs with a capacity of 4-5 thousand Celvinov.
On a note! Warmland garlands are more common, although there are such examples of architecture when cold light is appropriate, for example, for blue roofs or walls.
If we consider the method of control, the timer is usually provided, controlling the illumination sensor or the typical switch. Garland can be eaten from the main facade lighting system, although it is not difficult to carry out a separate cable for it.
Article on the topic: Sean Penn: Star Interior in all details
The quality of the garlands can be traced by the state of its wires. . Plastic base is cheaper, it is not adapted for serious freezers, cracks at low temperatures and strong wind. Rubber wires are better, they can be found in characteristic tactile softness, they are slightly thicker, the LED is soldered along with an extra cap.
Specificity setting backlight
Typically, garlands are attached to the bottom line of the roof. Additionally, you can decorate and dry, but here you need to take into account the basic material of the roof of the roof, whether the fastener hold on it. It is easier to decorate the wooden sink of the roof, and the plastic will have to tinker.
Important! If the roof is finished with tile, the backlight can be installed only by technical brackets, it is for them to cling to the part. If the tile is soft, along it can be installed a special rail.
Decorators recommend buying 1-2 garlands more, it may be difficult to find identical models. If it is colder -13 ° outdoor, the backlight will be tough, the conditions are not suitable for installation. A special glue can be used as retainers or hook garlands for non-removable brackets that will come in handy in the next year as a finished base for highlighting. The garlands are better to remove the onset of spring, even if they are afraid of moisture, they will ruin under the sun, can melt, deform.
Backlight of the facade of the house. Building for the New Year (1 video)
Garland for the facade of the house (7 photos)
