The mirror is a rather fragile subject, so it can crack from any incorrect movement. There are several ways to fasten the mirror in the bathroom. This article will show advice that will help you do it right.
Gluing mirrors on tile glue
The mirror can be glued in the bathroom with tile glue.
To do this, you will need:
- First you need to decide on the place where you will hang the mirror;
- If you want the mirror to be on the same level with a tile, then you need to choose such a mirror, the thickness of which will be equal to the thickness of the tile, most often the thickness is 6-10 mm;
- After that, it is necessary to prepare the place for the mirror, for which you need to construct tiles from there. It should be very careful to do so that adjacent tiles are damaged;
- When the place is cleaned, it must be sharpened and aligned;
- The next step will be the gluing of the lower border, and the glue should be applied perpendicular to the curb so that the clutch with the base is better. To equalize the seams, you can use plastic crosses that should be fixed between the seams until the glue does not dry;
- Then it is necessary to glue the upper curb and nourish a small wooden plank to the wall, the purpose of which will hold the upper curb to dry the glue, since the raw glue can not withstand the weights of the tile;
- Next, it is necessary to put a side curb, not forgetting to clean up with all the excess glue from the tile;
- After complete drying of the glue, you can start mounting the mirror. It must be remembered that there should be a small gap between the mirror and border;
- Now you need a toothed spatula (the teeth are most suitable, the size of 6 mm) and tile glue;
- It is necessary to apply a thick layer of adhesive on the wall, while having a spatula to the wall as perpendicular to the wall;
- Next, you need to put the lower edge of the mirror and insert a plastic cross between the mirror and tile;
- After that, you need to apply the mirror to the wall completely and press in such a way that it becomes closed with tiles;
- In order for the mirror to be well fixed, it is necessary to hold it pressed about 10-15 minutes;
- When the glue is completely dry, you can start the stamps of the seams.
Now you know how to install the mirror in the bathroom with the tile glue and you can do it yourself.
Article on the topic: Bedroom repair ideas do it yourself: 3 Original ideas (photos)
Gluing mirrors on tape and liquid nails
It happens that there is no desire or possibility to rub the tile, and the place for the mirror was not provided, what then to do? In this case, the mirror can be glued to double-sided adhesion, but it is necessary to use only waterproof tape, which is well suited for the bathroom.
You need to take a special waterproof bilateral tape and stick it around the perimeter or vertical stripes on the inner surface of the mirror. Then you need to thoroughly clean the surface of the tile, remove the protective film from the tape and attach the mirror to the tile, pressing it as much as possible.
Remember that this method is suitable only for attaching small mirrors, as tape can not withstand the weight of a heavy and large mirror.
There is another method with which you can glue the mirror, but it is much more painful, but is suitable for large mirrors:
- To begin with, it is necessary to attach to the wall using liquid nails profile;
- Then you need to fasten a piece of water-repellent drywall to the profile;
- After that, with liquid nails, the mirror must be glued to the plasterboard. In this case, the compound will be very durable and it will be able to withstand the weight of a rather large mirror;
- Note that when using this method, the mirror is attached to plasterboard, and not on the tile.
This article discusses the installation of a mirror in the bathroom with various mounting options, as this is quite a serious matter.
Mounting mirrors with screws
Currently, you can find mirrors in which there are holes for fastening. Hanging such mirrors is very easy - you will only need to drill in the wall of the hole, then insert plastic dowels into them and screw the mirror to the wall with the help of screws.
Just do not forget to use rubber gaskets. One gasket is installed between the wall and the inside of the mirror, and the second is between the screw and the front side.
In order to ensure the best evaporation of moisture and ventilation, it is necessary on the back of the mirror to glue the foam pads, which will help to increase the distance between the mirror and the wall, which in turn will contribute to the evaporation of moisture.
And how is the installation of a mirror in the bathroom, if there are no holes for fastening on the mirror? In this case, you can make them yourself.
For these purposes you will need diamond drills. It will be necessary to do all the necessary measurements and draw the labels on the surface of the mirror. Then you can proceed to drilling, but you need to remember that the mirror will be heated when drilling and may even crack so that this does not happen, it must be constantly cooling. For these purposes, you can make a bath of plasticine in places of drills and periodically fill it with water.
Article on the topic: How to collect a bed-attic: instruction and work order
When the holes are ready, it is necessary to round their edges, as they may further lead to cracking. This can be done using a skirt, which can be turned on a bar.
After preparing holes, you can mount the mirror using rubber gaskets and screws, as described above.
What height hang in the bathroom mirror?
The place where the mirror will hang, it is best to determine in advance before the tile will be laid. But for this you should know the height of the installation of the mirror in the bathroom.
Most likely, the mirror will be located above the washbasin or sink.
Therefore, the height for the mirror needs to be chosen as follows:
- From the lower edge of the mirror to the floor should be at least 1.2 meters;
- The top edge of the mirror must be positioned so that it is to be flown with the top of the door, that is, about two meters from the floor;
- Between the mirror and the washbasin, there should be a distance of about 20 cm;
- In the event that you have a small mirror, it should be placed at the level of the eye of a person looking into it.
What to choose the shape of the mirror?
In accordance with the advice of the values of Feng-Shuyai designers, the best shape of the bathroom mirror is a circle. Since ancient times, our ancestors believed that a round mirror, which has a mystical properties, is able to protect a person from damage and evil eye. Round-shaped mirror was a kind of magic symbol.
According to the feng, the round mirror is able to restore the aura of a person, and also helps to be improved. The beneficial effect of the round mirror on the well-being of a person was confirmed by even scientists, since when a person looks in a round mirror, it calms down and relaxes. That is why the circular mirror is a symbol of harmony.
Psychologists believe that the mirror of the round shape is associated with a person with carabically, cake and the sun.
Also, a large and round mirror in the bathroom will help to increase the visually volume of space, so if your bathroom has small sizes, you just need to hang a round mirror in it. And you do not need to worry about the fact that a large mirror will often fade - the extract for greater power will help you cope with this problem.
Merror Installation Master
I want to share with you how, with my own hands I installed the mirror in the bathroom, but rather I changed the old mirror to the new one. Next will be described in the order of installation with the photo.
Article on the topic: Roto Door: Features of the Mechanism and Review Original Roto Accessories
First of all, you need to dismantle the old mirror. Remove it is very simple.
Now you need to try on a new mirror and mark the place of attachment. I fucked the mirror on the hooks. To do this, you need to make holes in the tile and wall. So that the tile does not cracked gluing the malarious tape. Scotch will not allow the drill to slide along the tile.
Using the perforator made a hole.
Inserted a plastic dowel and screwed the hook, which will later install the mirror in the bathroom.
I started assembling the mirror, screwed the glass shelf.
Has hanging a new mirror.
Independent decoration of the mirror
After buying a beautiful mirror bathroom, you will probably want to make it special and improve.
In this case, you can independently decorate it using various materials for this:
- plastic spoons;
- gypsum casts;
- twine;
- rhinestones;
- pieces of wood;
- marine pebbles;
- pieces of tile;
- mosaic.
This is only a small list of materials that can decorate the mirror. Turn on your fantasy and create.
Next, several options for self-decoration of the mirror will be discussed.
To do this, you will need:
- paints of several colors;
- hot glue;
- plastic spoons;
- Circle of HDF with a round hole under the mirror;
- Round mirror itself.
First you need to break down the handles from the spoons to get a kind of flower petals. You may need quite a few such petals, depending on what size your mirror has.
Next, you need to glue these petals in 4-5 rows to the circle with hot glue, and then paint them into different colors. In the center you should use a darker tone, and light - closer to the periphery. Now you need to stick the petals to the mirror so that it becomes like chrysant.
In the same way, instead of spoons, we can use wood cuts that have different diameters, which should also be glued with hot glue to the mirror base. It will look very original and beautiful.
Purchase and subsequent installation of the mirror is a very important stage in the trim of the bathroom, so it is better to choose a place in advance where the mirror will be installed. It must be done before laying the tile. But if for some reason you did not do, then the mirror can always be glued to the tile using double-sided tape.
With the help of a mirror, you can make the interior of your bathroom unique and very original if you decorate the usual mirror yourself by any infirred materials. To do this, you will need a little time and released on the will fantasy.