Plastic doors enjoy ever increasing popularity. They are used on balconies, as interior and input in rooms of various purposes and private houses. The doors are made according to the same technology as metal-plastic windows: steel frame covered with PVC. The frame is installed double glazed.
Choose accessories
For the manufacture of structures, especially input, use enhanced metallic design. The popularity of products from metalplastic is associated with good performance and low cost in comparison with products from other materials. The design of the plastic doors may differ in sufficient diversity to satisfy different tastes.
Furnitura
An important value for long exploitation and comfortable use is played by accessories:
- loops;
- opening and closing mechanisms;
- locks;
- constipation;
- closers;
- clamps;
- latches balcony;
- pens.
The share of the cost of fittings in the total price of the product emphasizes its value. The cost of the door fittings is up to a quarter from the cost of the product.
Depending on the purpose, various tasks are assigned to the door fittings.
Firms Manufacturers represent a wide range of door accessories for internal and external.
Door hinges
One of the important details for installation are hinges that ensure the mounting of the door leaf to the frame and opening and closing.
Three types of loops for PVC doors are distinguished:
- scrape;
- overhead;
- Applied.
If overhead or screw loops are used, then it is possible to adjust without removing the door of the door in three planes: vertically, horizontally and pressed. Applied loops allow regulation using additional gaskets. The choice of type of loops is affected by such parameters as the weight of the sash, the profile width, and the requirements for the appearance of products. Options for PVC doors can be seen in the photo.
Door hinges are made of several materials. Zinc alloy or aluminum is used for the hinge housing. Pins are made of stainless steel. The loops fasteners are also made from stainless steel or galvanized steel. The inner liner is made from alloys of ferrous metal, and for the sleeve is used teflon or plastic.
Article on the topic: How to clean the filter in a washing machine?
Castles for PVC doors
Door constipation differ in the degree of reliability. Single-side locks are used for interroom and balcony options. There are models with the installation of the pressure handle and for mounting with the knob with a bracket. The size of the housing depends on the profile width and there is 35, 40 and 45 mm. All locks are combined with response left or right straps. Typically, the bar is not included and selected separately. There are dependent on the type of profile and universal. Response planks can be adjustable.
More complex systems are used for the entrance doors. Rake locks have anti-burglar characteristics and comply with European safety standards EN 1627. Such locks allow you to fix the door at several points, and not just in the center, at the installation site of the castle. Standard equipment has three locking points: at the installation site, and in the upper and lower corners of the door canvase.
There are also mechanisms with increased burglary, they have five points of constipation. Additional shut-off pins are straight and hook-shaped. Castles have a different number of riggers - up to five. An increase in the number of riggers also contributes to greater safety of the castle design.
Multiple locking locks are produced in various modifications:
- for pressure headset;
- For use with a knob with a bracket;
- having anti-burglar trumps;
- with additional constipation;
- Semi-automatic.
Semi-automatic locks have the ability to open from the inside by turning the handle to 45 degrees upwards. Outside, this constipation opens with a key. Rotate the knob makes it possible to block when the key is opened. How such a castle works can be seen in the photo.
Pens
Apply both handles with pressure heads and stationary handles on plastic doors type bracket. Handles of the stuff most often used for the entrance doors. They are different forms - semicircular, rectangular, Z-shaped. Available in three dimensional variants: with an inter-axis distance in 250, 300 and 350 mm. The diameter of the handrail is 32 mm. Standard colors - white and brown. The material for the handles is a durable plastic or coated aluminum.Article on the topic: What to do if the child ate the wallpaper glue
Closers
Usually, the closers are installed at the entrance, but can also be used for internal doors. The closer mechanism provides smooth closing. The use of closers at the entrance doors allows you to increase thermo and noise insulation.
The most common are models for installation in the top of the sash. The conversion mechanisms are brewing, given the width of the doorway and the weight of the door canvase.
Buying a closer, be sure to specify for the external or internal installation it is intended. Closers for premises at negative temperatures will be frozen.
Accessories for balcony doors
The doors for the balcony are equipped with handles with a pressure headset - single or pair. In pair handles, the outer handle has a blocker from the inside of the room to protect against penetration. If a single push handle is used, then an additional "petal" type is installed on the side of the street, allowing you to cover the doors, while on the balcony.
Fix the balcony door in a closed position, while on the balcony you can with the help of a balcony latch. The latch reliably fixes the door in the closed state and easily opens when pressed.
Even the highest quality and reliable accessories over time requires configuration. It is periodically necessary to pull fastening and adjust the mechanisms of fittings. For adjustment, you can call specialists, and some operations can be made independently. How to do it, you can learn from the video.