The harmonica of paper is a very original and beautiful product. Origami is the most beautiful kind of art that has not been losing its popularity for many years. Origami masters are capable of creating a unique piece of paper from a simple piece. It is also worth considering that origami positively affects the state of the human nervous system, and also well develops the motility of the hands of children. And this is all scientifically proven! Harmonica as an old musical instrument is a symbol of fun and joy in the house. This article will help to easily and quickly make a crawl "accordion" with their own hands.
Unusual option
First of all, it is necessary to print the basis with the folding lines, point or dashed. Schemes can be found on the Internet. All dotted lines bend up. And the lines scheduled for points - down. Gray areas are needed in the details to apply glue on them.
Start gradually bend step by step.
Then glue the workpiece into the tube.
Next, start on slightly bend along the lines of the harmonic furs.
Lines across the edges bend in a different way: the dotted is downstairs, and the point line up.
Then start collecting the details of the side parts of the harmonica.
Fold details on the bend lines, apply glue to the gray area.
Place everything into the casing and fix glue into place.
Be sure to make sure that all parts of the crafts are smoothly located in their places.
The photo is fashionable to see a hole for sound.
It remains only to insert a blank and paper harmonica is ready!
Accordion Paper Harmoshka
This is the easiest way to cope with even a child. First you need to print all the details of the accordion on the printer. On each fold "accordion" there is an empty window where you can put the calendar pages.
Article on the topic: how to sew a cap with your own hands
Next, you must fold on the dotted lines the basis of the accordion and glue it. Then collect the design of the individual details. And all, we got a wonderful harmonica!
Crocodile tool genes
This is a very special kind of harmonica without the finished markup scheme. How to do it?
A4 sheet to cut in half along the horizontal line. Then split the sheet 31 fold, on 32 equal parts.
The photo shows how to bend in half:
Steps 2, 3, 4, 5 bend in half. The upper layer should be divided into ½, ¼, 1/8, 1/16 and 1/32. Expand. Using each zone inputs, to divide the entire sheet to 32 equal parts. Even lines remain convex, and odd - concave.
Then make a fold of an arbitrarily height (from 0.8 to 1 cm), parallel horizontal side. Getting ready to bend in half.
Next, deploy all the bends. Line about bend along the central line. The fold should be done only between lines O (point A1) and 2 (point B1).
Bend blank over line 2.
Then repeat the fold of the extreme line to the central - between points A2 and B2 to the 32nd line.
All previous actions repeat from the bottom line, which is from the edge of 8-10mm. On the reverse side, repeat all the bends.
Through all the points b and make a fold.
It's time to collect the details of the harmonica. To do this, use all previously obtained bends.
Expand all bends. Fold the billet on bending parallel to the horizontal side. Each fold should be 90 degrees.
Start folding the harmonica, first the edge and further on the folds.
The master class is over, all crafts are ready!
