The model of any vehicle can be created with their own hands from the girlfriend. In this master class, we will demonstrate you like a packaging cardboard to make a tank model. You can collect it with children. Such fun will have to do with them, and having mastered the basic principles, you can create other models.
Materials
To make a model of a tank of cardboard with your own hands, prepare:
- cardboard;
- scissors;
- handle;
- line;
- glue;
- Scotch.
Step 1 . On the cardboard you need to flap and cut the main components of the tank. Make it better gradually to not get confused in detail. To begin with, cut down two cardboard strips of 19 x 1 cm, two more strips of 9.5 x 1 cm and eight circles. Circles cut out of squares with a side of 1 cm. To do this, simply cut sharp corners.
Step 2. . Prepared parts are components of caterpillars. Take long strips and fold them with an oval, consolidating the ends of the scotch. Owl's side sides spread the PVA glue and glue them to strips of less length. Hold the parts until they grab, and after pouring the glue, cut out the protruding corners from the side strips.
Step 3. . Circles stick to the caterpillars. Contactful sides Lubricate glue and insert circles in oval. Place them at the same distance from each other.
Step 4. . Now you need to cut new components for another piece of tank. As a result, you must have two rectangles 5 x 7 cm, two strips are 5 x 0.5 cm and a cardboard strip with 5 x 1 cm sides.
Step 5. . Long sides of a large rectangle lubricate the glue and stick to them the caterpillars of the tank, retreating a little from the central line. In the back of the tank, glue a wide strip, and in the front two thin as shown in the photo.
On top of the whole design, glue the second large rectangle.
Article on the topic: Plastic Bottle Bells for Garden: Master Class with Photo
Step 6. . To create the top of the tank, prepare one square 5 x 5 cm, one rectangle is 5 x 1 cm and three strips 5 x 0.5 cm.
Step 7. . At the perimeter of the square, glue three identical strips. Whole attach the resulting construction to the already existing base of the tank. The remaining open part creek a wider strip, putting it at an angle, as shown in the photo. Empty triangles formed by side. Preparations for this cut out of the cardboard and pon them in size yourself.
Step 8. . For a tank tank cut one rectangle with 4 x 1 cm sides, 3.5 x 2.5 cm, 3.5 x 1 cm, two rectangles with 2.5 x 1 cm sides, as well as a trapezium from a rectangle with sides 3, 5 x 1 cm.
Step 9. . At the large rectangle are sticking the trapezoidal part. On the sides, at an angle of 90 degrees, glue two identical stripes. The remaining pieces of cardboard, glue the open parts of the tower, the long strip for this is poning in the form of a trapezoid.
Step 10. . Stick the tower to the tank, turning it a bit at an angle. On top of the caterpillars, glue two strips - the so-called protector.
Step 11. . Cut the blanks for a tank point. You will need two strips of 1 x 0.3 cm and one with a 2.5 x 0.3 cm sides. Little strips are glued from two sides from a long, putting them across. The resulting base in the resulting base is rolling to the tank tower.
Step 12. . Now make small details that complete the overall appearance of the tank. This is a sapper blade and a hatch consisting of a circle (2 x 2 cm square) and a long strip. This is an automatic machine gun, also consisting of a small circle (1 x 1 cm) and strips, and two tanks.
Model tank from cardboard ready!
