Recently, shower corners who do not only save place in the bathroom, but make it more interesting and modern, are greatly popular with apartment owners. The installation of shower cabins is not such a challenge, as a result of which even newcomer can cope with it. In other words, each wishes can make the installation of a shower corner with their own hands, just need to be patient and desire.
Scheme of a shower corner.
To set the corner for the shower with your own hands you will need
- building level;
- electric drill;
- screwdriver;
- silicone sealant;
- Construction pencil;
- drill on concrete;
- Drills on ceramic tiles.
Installing the corner of shower do it yourself
Mounting begins with the installation of the pallet, if it is meant, since, for example, in Europe, there is no longer shower corners, moreover, in our country such an option also begins to gain popularity.In most cases, it is all the same corners with pallets. The installation of a shower corner begins with the mounting of the pallet, and it does not matter, do the installation you are on your own or with the help of plumbing. Corner must be installed on the selected place in advance and install it in terms of level. The pallet alignment is made with the help of regulating legs, after all is exhibited horizontally smoothly, the legs should be fixed using nuts, and the pallet itself is attached to the wall.
After that, you can proceed to connect the pipes. To do this, a corrugated pipe extending from the siphon should be brought to the fan tube.
It should be used to ensure that all attachments and connections under the pallet are reliable.
Corner shower collection circuit.
After the pallet is exposed and plums is connected, you need to check the design. To do this, in the pallet you need to pour a small amount of water and observe how it goes through the drain hole. Then you need to check all connections for leakage.
Article on the topic: How to choose curtains in the kitchen - Useful Tips
Then it comes a turn of the installation of the walls of the corner, for this, it is necessary to put the lower guide to the pallet, it is attached with moisture-resistant sealant. From the bottom guide, vertical racks are departed from each edge, which are attached to the wall. Racks are fixed strictly vertically using a level. This is done in this way: the racks are displayed and the holes for fastening are scheduled. With the help of the electric drill, it is necessary to neatly drill the tile, plastic dowels should be inserted into the resulting holes. The rack is abundantly lubricated by a sealant from the mounting side to the wall and is fixed with the help of self-tapping screws. To the wall you need to attach the lower guide, whose joint should also be treated with sealant. After all the walls are installed, you can move to the installation of the upper guide. It is attached similarly to the bottom, with the help of self-sufficiency.
Shower Corner Door Hit
Connection diagram of an angular shower.
Doors for a corner can be made of plastic and durable glass, and, of course, the latter are more priority. When working with glass elements, you need to be as neat as possible. Almost all doors for Cabin soul are equipped with rollers. To install the door, it needs to be hooed with all the available rollers for the lower and upper guides. Then the door must be adjusted so that the door in the closed state had the maximum pairing. In other words, the door should not have neither from below, no gaps. Moreover, when opening and closing, it should smoothly move along the guides. After installing the door, it is necessary to attach accessories.
The final stage is the seams, and, if more precisely, their sealing. In this issue, the sealant is needed carefully, since the operational term of the shower will depend on its quality. The sealant is applied to the purified and dry surface, then it must dry. You should not forget that the place of the junctions will need to check, here you will need a shower, you need to send a stream of water to the joints, if the water does not succeed in anywhere, then you did everything correctly, if there are problem areas, they need to be dried and again seal .
Article on the topic: Connecting a flow water heater
Important! Some pallets are equipped with a reverse bias in the place of adjustment to the wall, as a result of which large gaps are formed. Laying the tile from the pallet can be output from the current situation.
Thus, the installation of angle for the shower is made with your own hands, there is nothing complicated in this process, and it can make anyone.