We make a wall dryer for clothes with your own hands

Anonim

We make a wall dryer for clothes with your own hands

The correct selection of the wall dryer for linen on the balcony is caused not only by its functionality, but also the size standard dryers are good, but they are not always suitable for the size of the balcony: because not all owners are ready to highlight such a number of area for the dryer. Not in all cases, people want the ropes on top to cover the balcony, especially for the premises converted to the room.

How to choose a good dryer on the balcony

If the construction of such a useful thing like a dryer in your plans is not included, the design can be bought. But the choice is wide, and how to understand what is convenient for you?

The following tips orient you:

  • Foldable dryer . It is usually inertial models in the form of a drum, on which ropes are wound. In some model, the rope can only be one, some contain up to 10 ropes. This device is used as follows: the ropes are unwinding, and on the opposite wall are fixed on hooks. When the linen was dried, ropes are removed from hooks, and they themselves wound on the drum. "Minus" of this dryer is that there will be no heavy linen.
  • Telescopic dryer . The principle of its action is that the tubes in each other are simply moving. And in folded condition, it looks just like a towel holder. Metal tubes are used for linen, sometimes strings. This increases the strength of the design, as well as its carrying capacity.

We make a wall dryer for clothes with your own hands

Lack of rope dryer for linen in frequent rope and fixed height

  • Console dryers or harmonic . Look like sliding mounts with metal tubes (5-7). Tubes are round, so the undesirable races on the underwear remains. This dryer can withstand a lot of linen, about 10 kg.
  • Rope dryer . A cheap product, but the rope, no matter how to twist, will overcome. But the design quickly and easily folds to the minimum size. And on very small or cluttered balconies is the only acceptable option.

Article on the topic: All about painted interior doors

These are just the most common types of wall dryers. To pay attention, of course, it is also on the material from which the design is made. For example, plastic dryers. It is inexpensive, the palette of the colors of their wide, looks easily and bright, without taking the interior of the balcony. Strong enough.

Steel chrome dryers are designed for many years of service. Do not rust and withstand a lot of linen. But on a small balcony can look with a weighting element. More expensive at the price.

We make a wall dryer for clothes with your own hands

Console drying for linen significantly saves balcony space

We make a wall dryer for clothes with your own hands

In folded form, the telescopic laundry dryer does not have large dimensions

We make a wall dryer for clothes with your own hands

Dryer "Elevator", placed under the ceiling, is the most convenient option for the loggia or balcony.

Aluminum polished dryers - a compromise option. They will decorate the balcony, lungs, durable, beautiful.

Popular now and type of dryers with textile elements. If the fiber on them is synthetic, the design will serve for a long time, as the synthetic is not so afraid of fungi and mold, like natural material. Usually in these devices there is a tension regulator.

Wall dryer (video)

Wall dryer for linen - how to make yourself

This design is an excellent opportunity to show your creative forces, because this device is easy to do, but the originality and love of creating things will be with your own hands.

You can make a small dryer, which inoperative time will serve as a decorative element on the balcony.

Materials and tools need the following:

  • Wooden bars,
  • nails or screws,
  • wooden bars
  • paint,
  • furniture loop
  • locking lock
  • Board-based
  • folding mechanism
  • Furniture buttons.

First of all, you need to collect the mobile component of the dryers. To do this, measure and cut the bars in the number of four pieces to get a frame. After that, you need to cut four identical segments of wooden rods. In the bars, the drill is neatly done deepening, where the rods are getting up.

We make a wall dryer for clothes with your own hands

The rope drying for linen on the roller mechanism can be reached by the perimeter of the balcony

Rods need to paste enough tightly so that the grille came down strong - still things there can hang and heavy. In order for the design to be more convenient to collect, bar, sinking, on the ends can be narrowed.

The process further develops as follows:

  • It is necessary to make sure that the dryer is flat, the crossbar is parallel, the rods are thoroughly fixed. If you leave some irregularities, the balcony clearly will not won. If you were convinced that everything is fine, the upper and lower bars are attached with self-draws or nails to the design.
  • The board is the basis that will be on the wall, the size is adjusted to the lattice you already manufactured. The width will be equal to the lattice, and the length of the board of centimeters to 10 should be greater than the lattice. These parts are connected to the furniture loop.

Article on the topic: Norwegian style in the interior

We make a wall dryer for clothes with your own hands

A folding wooden dryer for linen is not difficult to make with your own hands.

We make a wall dryer for clothes with your own hands

With the help of rods and screwed into the wall of the rings, you can make a simple dryer

  • Now you can proceed to paint the future dryer. The color is taken by the one that only decorate the balcony. For example, if your balcony has a pistachio color, the dryer can be on the tone lighter, or the tone is darker. In general, any color that will delight the eye of the owner will suit.
  • When the paint dried, the time has come to supplement the dryer with all the missing functional parts. At the top of the dryer, a locking lock is attached.
  • Side should be applied to the folding mechanism. Its size depends on how much you want the wall dryer for linen for linen folded. Someone needs that she does not occupy a balcony, more than a fifth part, someone is ready to sacrifice a large space.
  • Now at the bottom of the base boards, you need to mark three points, between which there will be an equal distance, to drill small holes at these points and secure the furniture buttons in them. Furniture buttons are pens that, if desired, can replace simple hooks.

Design ready! The final result will be a pretty compact structure from the board, for example, peach color and a snow-white grid with buttons under the bottom. When you need - the grille is advanced, and things are dried on it. When you do not need, they will lean to the boards, and looks like a wall decoration.

On the furniture buttons or hooks comfortably hang things on the hanger, which should, for example, ventilate. Such a design is definitely not only decorate the balcony, but also will save space on it.

Dryer for linen with your own hands on the balcony (video)

Wall dryer-fan - how to make yourself

  • The following type of dryer is also quite popular. It is easy to make it, and the appearance is characterized by originality and is also able to transform the balcony.

Article on the topic: How to effectively eliminate the creaking parquet

To make such a device, you will need:

  • stair bass
  • board,
  • Nuts and bolts,
  • Steel corner.

As you can see, the list is small than the attractive this design. Balaasins for stairs perfectly fit into the dryer as linen holders. They can be bought on any construction market at an affordable price. The middle part of the baluster, where it will hang underwear, should not be embossed. The edge where the round cross section becomes square, you need to cut off, and the second edge is simply shorten.

We make a wall dryer for clothes with your own hands

Wall drying for linen on the balcony - convenient and practical solution

Next, act like this:

  • The second edge, which has a square section is a hinge. It follows from the edge to retreat 2 cm and drill a hole in the center with a diameter to a centimeter for a bolt. Molding this design will be between two corners.
  • To the concrete wall, the corners are attached directly on the wall, but if you deal with plasterboard, holders are installed on a kind of substrate. In her role will perform a board base, similar to the one that appeared in the previous instruction.
  • The assembly holders should not hang out, but their easy rotation is necessary, the washer is put between each baluster.
  • And the final finishing of holders is concluded. It is easiest to cover them with a varnish, pre-processing the tree by the sandpaper. But you can, of course, and paint the entire design in your preferred color.

As you can see everything simple: the dryer is comfortable, unusual in shape, and most importantly, not cumbersome. If a small balcony, such a product is quite appropriate.

Wall dryers have many "pros", and most importantly, the choice of models is wide. Compact, unusual design, convenient to use, lungs - they become an integral part of the balcony, and do not steal space.

Successful choice!

Portable drying for linen with your own hands (video)

Read more