It will be wrong to assume that only little girls make layouts of paper houses from paper. Of course, your princess will also be glad to such a gift, but they can come in handy in the architectural idea. Before being taken for construction, always make a reduced copy. At the same time, PVC (polyvinyl chloride) is used, from which the substainless parts cut out the milling machine. Then they are connected by a solvent.
But you can repeat the masterpieces of architects without special equipment. Such a house can be not only a useful layout, but also decoration at home. The most common material for this is paper, so the process will do not be too expensive.
We buy materials
You will need colored paper or cardboard for work. The latter is preferable for complex models, as an increased strength is required. For sweep it is better to take paper.
All windows, doors and other small pieces will cut through with a knife. Watch it to be sufficiently sharp, buy better in a construction store.
You can connect the details as super-glue - it allows you to speed up the process - both PVA (but it is better to speed up with the help of a hair dryer). In addition, scissors, pencil and ruler will be useful. For decorating you can use paints.
Select the scan
If this is your first experience in playing house layouts, it is better to take a finished scan. They can not only be found on the Internet, but also make themselves. This is a very exciting process.
You can choose almost any program. It is desirable that she worked with vector images. One of the most convenient in this plan is CorelDRAW. Building it is done very easily, you can change the thickness of the lines and load your own textures. But the built-in library also pleases the proposed photos.
Article on the topic: Video on weaving from newspaper tubes for beginners with a master class
The first step must be drawn the oblong rectangle. Now it needs to be divided into two pairs of the same walls located through one. On the lower edges you need to build the floor, it is attached for one of the faces to the general layout. The roof is divided into segments and also attach. After that, you can add architectural elements and visual effects. And do not forget about stripes fastening.
Stages assembly
Print and cut the previously obtained scheme.
If you do not have a color printer or you did not use textures, you can translate the blank to the cardboard.
With the help of a needle and sewn mark the windows, doors and decor elements. Cut is needed all at once, entirely. And preferably a stationery knife - scissors will leave serifs. Pre-lay the plywood sheet.
Additionally, make shutters, doors, canopies and the like. We will glue them at the very end. Using the ruler, take all the bends - it will be easier to collect.
Video on the topic
In our selection of video lessons, you will be able to find out how more complex houses are created, and many interesting ideas will handle: