Role-playing games are very common among preschool children. Most interestingly, when there is a necessary props to such fun. Usually girls are quite an elegant dress so that they feel like princesses. The boys require a more detailed approach to uniform. If the baby loves to imagine himself a knight, you can please it with a suitable costume: helmet, shield and sword. It is easiest to construct a knight's helmet with your own hands, and the shield and a sword purchase in a children's store.
Paper requisites
The simplest version of the knightly helmet is the manufacture of it with the help of a material on hand. In almost every house where there are children, there is a cardboard for all sorts of crafts to kindergarten and school. It can be used in work.
In order to make a cardboard helmet, a cardboard sheet will be required for the base (the length is calculated by the scuffing of the head with adding 10 cm, the width is 35 cm), plus a cardboard piece for the top of the product; glue (most convenient in PVA); scissors; A piece of soft colored paper or a bright feather.
In the center of the Cardboard sheet, taken for the base, the window is cut in the form of a square from three sides. According to the unrealted side, it is strung out. It will be taken away.
Then the base is twisted to the contiguity of two slices. The edges glued together. The resulting cylinder is placed on a piece of cardboard, provided for the top of the helmet, and will be burned along the contour.
The circle made is complemented by drawn small rectangles.
Figure is cut.
Little rectangles should be bent into and using them to glue the cut circle to the base.
It remains in the center of the tops insert the pen or something similar, for example, several pieces cut out of paper bright color.
The product is ready.
If you want a gift for a boy, a functional load can also be surprised by a knitted knight helmet. The child does not want to part with it, using as a headdress in the cold season.
Non-standard cap
The performance of the warm cap in the form of a knightly helmet does not require a high level of skill. It is enough to own a crochet technique.
Article on the topic: Openwork Snooth knitting needles: Schemes and description of new products of 2019 with photos and video
Before starting work, the scum should be measured. The subsequent master class is designed for 59 cm.
For the manufacture of the product, a semi-wool yarn will be required (50% of wool, 50% acrylic) gray and some black yarn, hook number 3 and 2 identical buttons.
The attached scheme will speed up the knitting process:
At work on the cap is used simple technique. The initial seven rows knit a column with Nakid, focusing on the scheme. As can be seen, the add-on loops is introduced gradually.
The eighth row is already lying without adding.
Starting from the ninth row, increases for each tenth loop. The tenth line is preserved without the introduction of additional loops.
In the eleventh row, additions are required: two columns instead of one are binded to each eleventh loop.
The twelfth row continues without adding.
During operation, it is desirable to measure the product around the circumference using a meter tape, in order not to exit the framework of the desired size. Ideal if it is possible to periodically try the knitted blanks on the future owner.
In the thirteenth row, one additional post is also introduced into each twelfth loop.
Upon reaching the required size, subsequent ranks (in this case, from 14 to 18) are knit without adding.
The nineteenth and all other rows are encouraged by a semicircle. To do this, from the center of the back of the header, it is counted in both directions of 33 loops and noted threads so as not to seize.
The semicircle is encountered in six rows. At the same time, on the second row, it is desirable to make an increase in the form of one column from each edge, so that the future helmet was most convenient in the landing.
The basis is ready. The next step will be the manufacturer took. Here it will be necessary to introduce a cooked black yarn.
A chain of gray yarn in the amount of 22 loops is recruited. She will be the center took.
From the chain in both sides will follow the gradual disabling loops. Every two rows change the color of the thread with gray on black.
Article on the topic: Scheme of a lilac bead curb: master class with photos and video
The disbuting of the loops is made by alternation through a row. Closer to the end, it is necessary to reduce the number of loops in each line so that the edges be taken out with sharp.
At the ends, air loops of the size corresponding to the prepared buttons took place.
When the manufacture was taken over, it is necessary to tie it with one near the entire edge to align the rows.
The ridge will become the last part of the helmet. For him, a chain of 42 loops is recruited. The scallop consists of three rows, in the second of which are made increases.
For the beautiful shape of the ridge edge, which will be located at the top of the helmet, should be kept by two columns instead of one.
When individual details are ready, it remains to assemble them together. On the sides, buttons are sewn, which has been captured.
The comb is sewn with thin thread in the color of yarn on both sides. To facilitate the task, you can use additional threads as auxiliary means.
At the final stage, all sticking threads are hiding. Cap-helmet is ready.
