The electric water heater has long been an indispensable equipment when hot water is turned off.
The choice of such equipment today is large, and, after the electric water heater is purchased, the question arises about its connection. You can instruct the installation of the water heater to specialists, and you can do everything with your own hands. The first option is easier, but requires certain costs, so more and more people prefer the second option.
Water heater connection circuit.
Installation of a flow water heater does not have a very complex process, on average, it will take no more than two hours. In addition to saving, it should be noted that the acquired skills will be useful in the future, for example, when it takes a repair of such equipment. Flowing electric water heaters have the following advantages:
- Water is heated at the request of the user. In order to be made of heating, it is not necessary a lot of time. Almost all models of such heaters have circuit breakers and switches.
- You can adjust the temperature at a given level, the temperature is heated up to 40 degrees.
- In addition to low weight and sizes, such equipment has aesthetic appearance, due to which it is perfectly harmonized with any interior.
- The flowing water heater is also good because it is characterized by the simplicity of the design, in connection with which, if necessary, it is possible to make it possible.
General recommendations
Scheme of the operation of the flow water heater.After the type and model of the flow water heater is chosen, before the start of work, you should decide on the moments:
- Access to equipment should be free for all time of its operation.
- The wall on which such a device will be fixed must withstand double weight (if the capacity of the water heating equipment is 50 liters, the wall must be withstanding the weight of 100 kg).
- If the wiring has not changed in the house for a long time, it is necessary to determine its condition, cross section and find out if it can withstand the load of the electric water heater. If necessary, you need to make repairs.
- It is very important to the condition of pipes and risers, if they are in unsatisfactory condition, then you need to immediately make repairs, otherwise the boiler can be out of order.
Article on the topic: Artistic parquet: photo and parquet ideas, beautiful patterns for laminate, drawings 33 class, laying and production
Before you start connecting a flow water heater with your own hands, you need to prepare the necessary tools:
- roulette;
- Perforator;
- wrench and adjustable keys;
- screwdriver;
- nippers;
- Passatia.
The following materials will be needed: paste, palable, shut-off cranes, tees, flexible connecting hoses, pipe from metalplastic. If you need to replace the wiring, then you will need a three-in-room wire, a socket or machine.
Connecting an electric flow water heater
Connection diagram of water heater to water supply.
Such a boiler is distinguished by the fact that it has small sizes, weighs a bit, which makes it easier to install it. Such equipment can be connected under the sink in the kitchen. It is necessary to take into account the fact that the heating of water should be carried out very quickly, for this in such equipment, powerful Tanes are installed in such equipment. Thus, the presented wiring requirements are very important, much depends on the performance of the device. So, the cable laying can be from 4 to 6 square meters. In addition, you need to know which current is calculated for the current. If this indicator is less than 40 A, then it will need to be replaced. In order to connect such equipment with your own hands, you will need a circuit breaker if the wiring in the apartment is not designed to use electric stoves.
After the voltage failure problem is solved, you can go directly to the installation. There are two connection options: stationary and temporary. If the temporary option is used, then the shower will be needed. When hot water is served, it can be easily blocked and not used. To do this, it is necessary to ensure the flow of cold water. In order to do this, you need to embed a tee into a cold water pipe, then install the shut-off crane, then open the output of the heated water and turn on the network. After 30 seconds, hot water will appear.
If the stationary method of connecting the flow water heater is used, with their own hands, the fence of the heated water is carried out in parallel with the overall water supply system.
Article on the topic: Decoration of the porch in a private house (35 photos)
Water heater connection options.
In order to do this, you need to stockday two tees that are crashed into a hot and cold water pipe. After that, cranes are set, and it should be borne in mind that the connection must be sealed (for this, a pacle is used with sealing paste and ribbon). After that, a pipe with cold water is connected with entering the heater, after which the intake of cold water is indicated in blue.
Then, by means of a hose or metal, the output of heated water must be combined with a shut-off hot water tap. Then the cranes and mixers open. It is necessary to make sure that everything is tightly there. If there are no leaks, the automatic or fork is turned on into a socket, then hot water should go from the mixer. If a stationary connection method is applied, then you need to not forget to block hot water risers (this should be done if the boiler is installed in an apartment building). If this is neglected, then the heated water will go through the pipes to the neighbors.
Additional Information
Thus, it becomes clear that the connection of the flow water heater does not have a difficult thing. Even those who have no experience in such a matter can do this job. It should be noted that if the connection passes as it should, then the repair of such equipment will be needed not soon. We must once again say that an independent connection contributes to the fact that if necessary, it is possible to make repairs without much difficulty.
At the same time, it should be taken into account that all work needs to be carried out with all attentiveness and accuracy, since if something goes wrong, there is a risk to flood the neighbors with water, which can lead to the most unpleasant consequences.
In order for such equipment to function in normal mode, it is necessary that the pressure in the system is at a constant level, then the temperature differences will not be felt. Such a device is intended for one point of water intake, in connection with this it is recommended to purchase several water heaters for washing, washbasin and bathroom. As for the installation of such equipment, it, compared to the installation of other heating devices, is characterized by simplicity.
Article on the topic: Choose your design curtains on three windows in the room!