Syricenami We used Japanese Ninja in the old days, and today we will learn how to make the clerics from paper at home. This weapon for throwing resembles a star form with four or more ends, which are directed in one direction. The warriors threw it in an opponent or enemy than could distract him or hurt. Weapons made from fine metal, sharply fell and used in battle.
Design features
How to do from paper Real Japanese Syricians? Samurai used in ancient times this blade as an additional weapon, hiding in the sleeve until the right time comes to battle with the opponent. The weapon could have from 4 to 8 rays-blades located in a circle. In the middle of the disk there was a hole for good aerodynamics. Japanese warriors have honed the edges on both sides so that it turned out sharp, like blades, wedges. The star threw unexpectedly, attacking the enemy strike. The flight was lightning thanks to the side ends that worked as the wings blades, as shown in the photo.
Today, according to modern law, it is impossible to use real metal sprockets. Therefore, we can make the same with their own hands, but from paper. Syricen can be used in different ways:
- Throw one hand with or without rotation.
- To play in samurai, you can squeeze your hand in the fist, put a paper blade on your hand, and you click on the product with your finger on the product so that it flies sharply.
- Take an asterisk in one direction and throw a long distance.
- You can arrange contests with children whose throw will be further.
- Sometimes they serve as a detailed for performances or scenes about the ninja.
- Such origami will be an excellent decoration for any holiday, for example, for the new year.
How to make it yourself from paper children's shurikens, shown on video With schemes.
What you need to know beginners
Folding such paper blades-stars is very useful, develops motility, memory and concentration. However, during work, new rules must be followed:
- If you made a product and wrap a scotch for giving hardness, do not leave it in places available to young children. Such crafts have very sharp and solid edges.
- Carefully make a throw, try not to harm yourself.
- For the manufacture of Syricians, it is necessary to sharpen the scissors, be as neat as possible when working with them.
- Sheets of paper also have sharp edges, do not spend your finger on them.
- Paper asterisk you can not throw in people and animals. Especially forbidden to aim in the eye.
A little of the story
Do not everyone know that the product may be found two types. In the first case, it is a Bo-Surician - the weapon of an elongated form, rather resembling a spear for throwing. And in the second - Hira-Syricen. How to throw:
- Bo. During the throw, the direction of flight and the trajectory of rotation is adjusted with medium and nameless fingers. The blade is necessarily directed away from itself, it can rotate during the flight of the blade or around its axis.
- Hira. This is a weapon resembling a star with sharp rays. Here we just look at how to build such a surrounding paper. This product needs to be thrown by an edge from ourselves and a sharp edge from the palm. Throw for sure that the paper blade flew in a straight line and rapidly. He must also quickly rotate around his axis, so in the center of the weapon used to make a small hole.
Varieties of Syricenov
Manufacturing technique
Creating a throwing product for children is work with paper. For an excellent result, you need to clearly follow the instructions and know several nuances:
- Make sure that the places of all folds are well stroked and leveled.
- Perfect paper for Syricen is a magazine.
- Always check the symmetry of all items.
- Some use tape for weighting design, but the product should fly well.
- Ninja paper spars sometimes use on summer bars for decorating cocktail glasses. In the middle of the shuriken make a hole and stick a wand or toothpick.
What you need for the manufacture of this funny craft with your own hands:
- Stationery knife or sharp scissors.
- Wide scotch. Used to lose weight and protect origami.
- Paper for origami. You can also use A4 sheets, colored paper and even sheets from magazines and newspapers with pictures.
How to make snorceren from paper using schemes, shown on video.
Paper quadrangular weapons
You can fold the paper ninja along with the child, it is very useful and exciting. In the final, Suriken can be decorated with pictures or patterns.
If all tools and materials are ready to work, you can start:
- Cut from the selected pre-sheet leaf smooth square.
- We divide the line of the line exactly in the middle to cut into two equal parts. If suddenly you want to create a multi-colored product, prepare immediately paper of another color and already make the second part of the square out of it.
- Both parts fold in half again strictly in the middle line. We had two rectangles. Now we fold the corners as shown in the photo.
- We fold both segments as in the diagram.
- We had two details, mirrored each other. We combine them as depicted by the example. To do this, turn the right-handed side up and we combine with the left.
- The most responsible stage is an assembly. We put the triangles on the right and on the left under the edge of the central triangles. In the diagram, everything is shown.
- We have a geometric figure with 10 angles.
- We deploy a 10-coolen face down, we have done all intact corners into the gaps.
- Star for throwing ready for flight! The process of creating a shuriken of paper with your own hands is shown in pictures with the instructions below. Of these quadrangular throwing discs, you can collect beautiful designs with a multitude of modules.
Octagonal paper disc
To make an eight-pointed star, 8 billets must be made first. Your product may be multicolored, monophonic or decorated with drawings and inscriptions.
Mastery according to the scheme:
- Cut the square of the square shape to then bend it diagonally from both sides.
- Canceling the edge of the sheet, as in the photo.
- We take a line from dasheds for the central and fold the workpiece.
- Then watch the photo with the instructions. Exactly on the red strip you need to fold the paper so that points in and from the coincided.
- The layout must be turned over to the opposite direction, then fold the layout on the right side on the red stripe. Salad strips must match each other.
- Then bend an angle on the dotted strip. We made one blank for a paper star!
- We make another 7 of the same layouts, and then begin the assembly!
- We take the first two blanks, open the right angle of the first lilac part, in her pocket we put the angle of the second pink source.
- The bent side of the lilac should be refilled in pink pink pockets. How to make Surician from paper, shown in the video below.
- Combined two first billets of our future figure should look like.
- All the details of the eight-pointed star must be connected in the same way.
- With the external and inside, the product should look like in the photo.
- We left to combine two blanks: the very first and final.
- We place the product face-side up, insert the edges of the first layout in the lower floor of the latter.
- Now you can enjoy the result!
Children will define!
2 version of the eight-pointed star
Step by step this process will look like this:
- Take two A4 sheets and do the way as shown in the scheme. As a result, 2 smooth squares should turn out.
- Each square is cut into 4 parts to make 8 small squares. Each add one by analogy with the photo.
- We fold the corners from above, it is necessary to make bends diagonally and one along, which will be outside. 8 squares need to be collected in a circle, with each time an acute corner of one detail must be inserted into the pocket of another, where the external longitudinal bend is located. In the process of folding, small corners should remain on the details.
- These small corners insert into the gaps, where possible.
All items need to be shifted to the center, and paper blade with 8 rays are ready! The process of creating a paper shurikena stages is shown in the video.
Several interesting options
Origami crafts are very popular today, so make it easier to make it easier. But there is also a couple of original ideas to create this pocket weapon for samurai.CD-DVDSyrichen
We will need an old compact disk and a bit of perfection:
- We apply a black marker markup to the disk, as shown in the photo. Must get an asterisk.
- You can drill small holes to give a figurination product.
- Cut the star along the contour. It is better to use a stationery knife, scissors, even the most sharp, can break our disk.
- The edges can be treated with sandpaper and apply the contour lines.
- In the center you can insert the washers to enhance the design.
- Syricen ready! Your child will be able to feel like a real ninja. You can put a small wall or partition from the foam, the weapon enters it as in the oil!
Christmas tree toy
To make an original decoration, you can use bright colored paper, foil or gift packaging.
The creation scheme is similar to those described above:
- We need two squares of the same size to make markings under the folding line on one: horizontal and vertical.
- Then we fold the square into the triangle, turn the same from the reverse side. How to make a surround paper from paper origami in the form of a Christmas tree toy, shown in the video below.
- We make a neat incision, we turn the triangle with a tube and lining.
- We repeat the same actions with all the details, glue them together and secure an asterisk for a thread or a fishing line to the Christmas tree!
Product Transformer
Make such a craft will be more difficult, you need to clearly follow the instructions and be as attentive as possible. The transformer has a complex structure of eight elements and quickly turns from the ring in an eight-pointed asterisk.
Let's proceed:
- We make a square from the leaf, bend down diagonally and fold in half. All folding lines thoroughly stroke or make a markup to the dotted line for convenience (it is not necessary to do this, in the diagram is shown for clarity).
- Corners at the top bend to the midline.
- We fold the workpiece into such a figure as in the photo.
- By the fold line, the corner on the left weeping inside.
- There are 8 pieces of such elements, you can use different paper on color.
- We take 2 billets so that the double corner is directed to the right. We have to get out a stupid angle. The end of the right blank insert into the left of the left, look for the side with the same end. The tips of the left blank bend inside.
- All elements connect with each other in the same way. How to make a paper transformer from paper, shown in the video below.
- The design will be a transformer if you correctly connect the first module with the latter. To do this, first bend the ends of the latter, as in the photo.
- And now you need easy movement of the hand moving the sides opposite to each other, to the center. The hole in the middle should disappear in the middle, and the product is no longer like a ring, this is an eight-pointed asterisk! To raise the ring back, you need to pull a little outside.
This paper blades fly perfectly, especially if they are not started in the form of a star, but in the form of a ring with a hole in the center. Your children will define!
Method technique
Homemade structures fly well if all the nuances are complied with their creation. As a rule, Syricen in flight should be virtuosively rotated around its axis.
3 basic methods of throwing:
- From hips. Make you need one hand from below up.
- From the chest. The throw is carried out by one brush towards the breast. The movement of the hand reminds the distribution of cards.
- Due to the nape. The brush has a little behind the ear of the opposite side, and the throw itself is similar to the throw from the chest.
It is not necessary to throw paper stars at all, you can immediately have several pieces. For this, the product is folded together with a small deck, and the throwing technology can be chosen as desired which is most convenient for you. How can Sorceren samurai be made of paper, shown on video with a scheme.
Throwing such origami will help your child training dexterity, accuracy and coordination. You can also learn how to calculate the distance of the throw, catch uploading to the target and improve your hands motor. In order for training to be safe, explain to your children, which can not be aimed in people and animals. Especially in the head and neck, otherwise you can get a small wound if the throw was strong.
Schoolchildren love to make paper slices, so it is fast and beautiful origami. As a rule, these are modular type designs collected from several elements to one of the product of an interesting form. To create it, you can use any blowing materials, but the most convenient is paper or cardboard. Be sure to try to assemble these little sprockets with a child and arrange a contest, whose will fly on.
Children can also play with them in the yard, competing, who has a more complex model. You can decorate such toys in eastern inscriptions and patterns, which is very symbolic for paper weapons of real samurai. The creation process itself will not take much time, only 15 minutes - the handicraft is ready!
How to make a paper ninja weapon in the form of a surrogue, stepped in the video master class.
Article on the topic: Knitting from moss light female blouse knitting needles: scheme with description