To weave baubles from ribbons, it suffices to follow the advice of our master class. It tells in sufficiently in detail how to do baubles from ribbons and even a beginner needlewoman will be able to perform everything immaculately.
Bakers from ribbons weave from satin ribbons, while for weaving bracelets, threads, leather elements, beads, beads and other decoring material can be used. Due to various color combinations, baubles from satin ribbons can be quite varied.
In the event that you only try yourself in the bracelet weaving, we recommend starting from the ribbons from ribbons, the different types of which we will be submitted below.
The scope of products from satin ribbons is quite extensive, it may be not only baubles, and as keychains that are hung on bags or keys.
So, let's deal with what ways there are ways to weave baubles from ribbons.
For the first method, you will need two pieces of satin ribbons of two colors.
For proper selection of colors, use information on the Internet about the values and the correct combination of color shades. For a lesson, take a ribbon of green and orange flowers.
At the first stage, a live loop from a green ribbon should be performed. To do this, its edge should be bent, and then wrap the ribbon of orange and tie a nodule.
Live loop allows you to pull up if necessary, if you pull over one end.
Further, bauing baubles from the ribbons will continue with such living looping. We form a loop from the orange tape and do it in an already ready green loop, which should then tighten a little. After that, the orange loop became more.
Further, weaving should be continued in the same way: we form a green loop and produce it into orange, after which the latter should be tightened.
Article on the topic: Frame for the photo with your own hands from newspaper tubes with photos and videos
When the required length of the product is achieved, the two tips are tied by the usual nodule.
Not a bad option to wear the resulting bauble on the backpack lock.
Further, for clarity, we will show how banes from ribbons are wearing, the video lesson is presented below.
Pay attention to all nuances of this work so that the weaving of phenoshek from the ribbons you have turned out right from the first time.
Another video tutorial on weaving baubles of two ribbons in the manner described above.
For such a bauble, you will need two ribbons of different color one meter long. For the convenience of weaving, the product can be fixed on the pillow using the sewing pin. Work begins with the formation of the loop on one of the ribbons. On the second ribbon forming exactly the same loop. We intersect two hinges with each other, and fix the product on the pillow with a needle. Wrap one looper around another ribbon, and we felt the second loop in the first. Next, you should pull the needle and tighten the nodules for the small tape of the ribbon. Now work continue to make alternately loops in each other in different colors, but with it tightening the nodule is necessary for the long end of the ribbon. Tightening the nodules should not be very tight, but not weak. Weaving We carry out until the desired length of the baubles is reached. To fix the resulting length of the baubles, it is necessary to tighten the free ends of the ribbons in opposite sides.
Now imagine a master class who will tell about the ribbons of banes from ribbons Square.
For such a product, the number of working belts will already be more. Prepare four working tapes whose width is not more than seven millimeters, and the length of at least two meters (depending on the desired size of the finished product). This square baubles received its name due to the form of the product obtained, which in the context resembles the square.
All four ribbons connect to one nodule, leaving about 10-15 cm free.
Ribbons lay out in the form of a cross and begin to weave.
Article on the topic: Camouflage fabric, types and properties of waterproof materials
From the upper ribbon we form from the top down the loop.
Next, the right ribbon we enhance the right left loop.
Now the bottom ribbon we enhance the previous side loop, carrying it from the bottom up.
It remains to transfer the left ribbon from left to right, to make it in the first loop.
Now in turn tighten each ribbon, while smooth woven square is formed.
The principle of weaving remains exactly the same throughout the weaving of the whole of Benches. When the required length is achieved, work can be stopped. As a result, you will get enough bulkneck.
Such a phenus can be worn not only in direct form, but a little twisted in the form of a spiral.
In this case, it is necessary to act extremely carefully, since with strong tension, the ribbons will lose their original shape and it will be impossible to return it.
As an option to strengthen square baubles, it is during operation to stretch in its center a strong thread or fishing line.
Next, we will also tell us about one embodiment, how to weigh the bacon of ribbon ribbons.
This technique will need to use the so-called Chinese nodes "Lotus". It should be noted that immediately the nodule should be tightened enough to tightly so that the phenoschka keeps his original shape for a long time.
For clarity, we take two threads of different colors with a length of 2 and 2.5 m, put out of the cross and fasten in the center.
We begin to weave with the fact that the dark upper thread bend in the form of the archer to the left over the white thread.
Now the left end of the white thread bend also in the form of the arch from left to right.
The bottom dark end of the tape again raise upstairs in the form of the arch on top of a white thread.
It remains the same to do with the last white thread, deploying it to the right left.
It remains gently pulling ribbons into the nodule, straightening out of this.
Article on the topic: How to grow a flower Aglionm
And now the nodes must be tightened even stronger.
After repeating, all in this way, we upset the lace of the required length.
The basis of such a cord is also a square weaving of tapes, which are then tightened enough.
Such a decorative lace can be applied different products: key chain, rim on the head, bracelet, handle for the handbag, etc.
Below is a video lesson, which will more clearly show how to weave baubles from ribbon ribbons. Please note that in this lesson, there are not two long ribbons, crossed together, and four associated with one nodule.
Now you know how to weave baubles from ribbons, whose weaving schemes are shown in this master class. At the initial stage of studying the weaving process, pay attention to the tension of the nodes in each scheme. In some options, it is necessary to tighten the nodules strong enough, whereas in others it does, on the contrary, it is not necessary.
Creative success and successful undertakings in weaving phenoshek from ribbons.