Fliseline wallpaper is very often used for the finishing walls. This type of finishing material is quite universal. It is easy to install and exploit, water vehicles, is durable and able to hide some small defect on the wall. The choice of flizelin-based wallpapers can be produced for any room.
Using the walls of flieslinic wallpaper
However, despite the simple requirements for the wallpaper, which will be glued to the phlizelin wallpaper, it is still worth being prepared. Today we would like to tell you how to properly spend work with the walls before sticking wallpaper.
Cooking walls
Wallpaper sticking - the occupation is not the most difficult, especially if it is a phlizelin-based wallpaper, but definitely requiring a large share of patience. One of the most important stages of work is precisely preparation for sticking. The errors allowed at this stage will certainly lead to the worst result in the future, therefore it is necessary to withstand the technology, to do everything correctly. I will cope with this task, almost anyone will be able to make it possible to collect with the forces and show some perseverance.
The main thing is not to overdo it with dismantling work and stay in time
Remove the wallpaper
First of all, we need to make a dismantling of old wallpaper, for this we need a sharp spatula and a large amount of water. It is better to choose a small but sharp spatula so that it is easy to crawl down the wallpaper. The big spatula will be useful to us in the following plastering.
- If old paper wallpaper is on the surface of the walls, they will be difficult to remove, use a large amount of water. Before dismantling, apply water and let it absorb on the wallpaper, and then remove old wallpapers.
- If the wallpaper on a fliesline basis was previously pasted, then, most likely, they will easily disappear with whole canvas. However, to pour water for the wallpaper, it is necessary to damage them, because they themselves are waterproof.
Article on the topic: how to wean a cat to drag wallpaper: what to make a cat scratches furniture, wallpaper that do not fight cats, protect the walls, liquid wallpapers and cats than to separate the walls
To create a smooth and straight wall, after remote wallpaper, we need plaster. It is with its help we will achieve a smooth and smooth surface. Most often, wallpaper from the walls are moving along with parts of plaster, as they were glued tightly.
Not the worst dismantling of old canvases
Therefore, before the mixing of new phlizelin wallpapers, or a fliesline-based cloth, we need to create a smooth surface of the walls. To do this, we use the plaster, you can choose to all the well-known German Rotband, you can other options.
Plasteur
The preparation of walls begins with the very basics, with a thorough plastering of the surface. The first layer is applied basic, thickness to centimeter, two. The consistency of plaster should be such that it can get into all the deepening walls. Rights height up to centimeter is buried in solution, and the wall becomes smooth.
Before the next layer of putty, called the "finishing" it is necessary to predict the entire surface of the walls. It is done to strengthen the inner layer of plaster. For primer, use a special composition that can be easily found in the store.
The second finishing layer of plaster is applied after the primer dry, the thickness of this layer varies from 1-3mm. All small wall defects are removed by this thin layer of putty. Usually, at this stage, builders recommend choose a vetonite, but whatever the finish putty you have taken, the second thin layer will help create a surface close to ideal.
Wall Alignment Works in the Room
After drying the second layer of plaster, the surface is sliced, the remaining minor defects are removed. Now the walls should be white and even, they will be easy to glue the wallpaper cannon on any basis, it remains only to solve the problem with the soil.
Soil
Plaster walls behind, now we have to progress the walls again, but already before sticking wallpaper on a fliesline basis. It is possible to rejuvenate with wallpaper glue, divorced in a more liquid consistency, or use a special composition, which is also sold in concentrate.
Article on the topic: Castle replacement on the inlet metal door
This time we produce primer to reduce the walls of the walls. We need to ensure that the fluid from the glue does not immediately absorb, and the wall has not remained dry.
Can anyone can cope with the task of priming
Now the walls are fully prepared for sticking phliselin wallpaper, or fliesline-based cloths. Recall that glue to such wallpapers is not applied, and only the wall smears.
Other options
Very bad option if you want to punish the wallpaper on the painted wall. Wallpaper on a smooth, slippery surface lay badly, so before sticking, we will have to be removed from the walls of the paint layer.
It's a very time-consuming case, but if we want to make a full repair, you will have to sacrifice the time. All basic preparations for working with wallpaper will be to remove paint from all walls indoors.
The paint on the walls is different
Remove paint from the wall we can in several ways:
- The easiest and low-quality option is to sand the surface of the walls, and in some places, using a knife to make serifs and scubons. Then the primer is applied and the wallpaper is glued, but they will be kept well without everywhere.
- Another option is not the safest - the paint is removed from the walls with a spatula, for which heats up with the help of a construction dryer. It is necessary in the respirator and with the established air circulation, since, when heated, harmful substances may be released from the paint.
- The third option is very dusty and dirty - the paint is removed using a pin, or an iron brush, bowed to a perforator or a grinder. When sanding walls, a huge amount of dust stands out, so the room you need to insulate as much as possible: close all the doors, windows and shut the slots.
- The last option is the use of special solutions for washing the paintwork. This method is also quite dangerous, so take care of the means of individual protection.
Article on the topic: Tile laying options - Methods and recommendations
After removing paint from the wall, before sticking phliselin wallpaper, the walls must be used to be primed, because in the original version they very much absorb liquids. Perfectly copes with this task primer concrete contact.
This time, a dusty method was chosen to remove paint from the walls
If the walls are badly injured when the paintwork is removed, then we return to the plaster of the walls. If there are extremely rapid damages, there is an opportunity to even stucked the walls along the beacons. However, this method involves applying a large number of plastering material.
There are often such walls that for their alignment you need to spend a huge number of plaster. In this case, it is permissible to consider the alignment of the geometry of the room by means of drywall. Overnight and wall defects are simply sewn by sheets of hypot.
Use to finish the walls of plasterboard
On the walls of drywall, flieslinic wallpaper are glued very well, but it needs to be pricked, but in this case you will have not so many primer material. Vinyl wallpapers on a fliesline basis will be perfectly shaved on even, prepared drywall walls.
Proper preparation of walls, before you beat your wallpaper, will avoid many problems in the future. Even if the repair will make lovers, many difficulties in the work can be avoided by conducting elementary work on wall leveling. In the future, you will only stay to enjoy excellent repairs.