Costumed carnivals are loved not only by children, but also adults. When selecting a dress in such an event, the choice often falls on an image of a colorful character - sea robber. For a pirate suit, it is quite possible to choose things from the casual wardrobe, providing it with characteristic accessories in the form of our handkerchief, rings in the ear, etc. The headdress is considered a distinctive feature of the outfit. At the same time, the pirate hat is made with their own hands pretty quickly.
Paper triangle
The choice of such a type of hats is based on reducing the time of work on the product. The paper accessory is not quite reliable, but with careful attitude, it is capable of listening more than once.
For work it will be necessary:
- Black paper (A3 or glued sheets of A4 format);
- White paper A4 (thin) - 2 sheets;
- Scissors;
- Glue;
- Thin gum for hats;
- Helium handle with black paste;
- Awl.
At the initial stage of black paper, a square blank is cut out. To do this, add the cooked sheet to the angle and cut off the extra rectangle.
The resulting square is converted into a circle by cutting off the corners from all sides.
The circle should be made with a paper fringe. A sheet of white paper is taken. It is divided into four parts by re-adding along the long side of the sheet.
Paper is cut into strips on bending. Across each strip is frequent carnation. As a result, four strips with a fringe should turn out. The fringe is twisted by the longitudinal pressure movements of scissors. Or for this you can adjust the pencil and tighten the paper with it.
A glue is applied to the unprinted part of each strip with fringe.
Strips are fixed along the edge of a black circle fringe.
Three points are laid down on the circle sections approximately at an equal distance from each other.
Article on the topic: Pattern Maker for Cross Stitch V4: Program and Video Installation and Work Lessons
Between points visually outlines the lines for which the fold should be made. Thus, the three raised hats side should form.
The center of the circle is manually squeezed out from the inside of the head remove, and the edges of the hats are slightly flexing down. It is necessary for the accessory conveniently placed on the head.
The second sheet of white color is cut in half along the long side. Each strip is again folded twice, and the corners are sharpened.
At the edges of the strips are made frequent cuts, imitating feathers. Paper is preferably spinning for truth.
Skull and bones are cut out of paper residues.
The skull is drawn up by a piece of red paper (brazer).
The prepared parts are drawn by a helium handle.
On one part of the tricons, the skull and crossed bones are glued, and on the other hand, paper feathers are fixed.
At the decorated parts of the hat with a selection, small holes are pierced where a hat gum is inserted. It is fixed by means of nodes from the inside of the product.
Triplet from fabric
Pirate accessory sews in the basic version. The subsequent decoration is carried out exclusively at will.
The following elements are involved in the work:
- Black or brown fabric;
- Glue-based phlizelin;
- Durable threads.
A scheme of the future product is built on the usual newspaper. It consists of three parts.
The child's head is measured. Based on the resulting measure, a rectangle is postponed, where the long side is equal to the scuffing of the head. Next, the circle is drawn with a radius equal to half of the scalp. Another circumference of the larger diameter is planned from the center of the previous circle.
The difference between two circles is laid depending on the desired hats fields. Paper parts are cut.
On the fabric and phlizelin alternately, the resulting pattern is superimposed and will be burned with the allowance for the seams.
Details are cut in a double size of the fabric and in a single instance of the adhesive material.
Article on the topic: Applique "Santa Claus" with your own hands: Templates for crochet
Fabric parts are strengthened by phlizelin by thermal processing. They take part of the bottom and are stepping out the front side.
Circled rectangular parts are taken to the inside of the bottom of the hat.
The product is turned on the front side, the seams are spread.
The glue fabric is afforded to one of the parts of the head removal fields. Parts of the fields are located facepiece and combined with a single machine seam.
The fields are turned, the edges neatly stroke the iron. The obtained two billets of hats are stitched with each other with the front side of the product.
Fields are uniformly turning up and with thick threads are fixed on the hatching of the hats. Basic pirate hat ready. For her decoration, you can use appliques for pirated themes, or to attach a long pen from the side.