The jewelry is now very popular among fashionistas. Handmade decorations are especially valued. Special place is occupied by beautiful and unusual products made of polymer clay. With its help, you can implement the most bold fantasies and make decorations for any image, style and mood. Incredibly stylish, beautiful and unique are rings of polymer clay. They are so beautiful that every lover of exclusive jewelry will definitely want to have such a ring. In this article, you can learn inspiration to create a beautiful rings, learn a lot of useful information and learn how to make such beauty.
Variety options
Polymer clay is a very fatty and plastic material. From it you can make almost everything. To work, use clay, which is sold in stores for creativity. The color palette is very diverse and you can pick the desired color. If the suitable shade was not found, then the clay is mixed to obtain the desired color.
For the manufacture of clay parts, the clay is rolled by subtle films using a rolling pin or a special paste machine. To give shape, products require different types of stacks. The most commonly used stacks with balls of different sizes and flat sharp or stupid stacks. In some cases, flat stacks can be replaced with a knife, pressing its opposite into clap. Sometimes they use toothpicks. For the manufacture of decorations, we will need a metal base for rings, their large selection is presented among accessories for needlework. The feature of the clay is that after the end of work, the product is baked in the oven. After that, the clay turns into plastic and becomes strong and durable. If desired, the ring is covered with a special varnish for polymer clay.
Decorations can be done on your own taste and domestic mood. The photo below shows the plastic rings in different styles.
Article on the topic: How to wash the stretch ceilings from dust and dirt
From the polymer clay, wonderful rings with imitation of stones are obtained. It is almost impossible to determine the form that the stone is not real. You can create decorations with the most rare species. It looks such rings incredibly attractive and perfectly complement the image.
Natural motifs are very bright and effectively imprinted in plastic rings. This style is now very trendy, and the rings with the image of the surrounding world look Magnical and derived from them freedom, clean fresh air. This decoration attracts attention and causes admiration.
Magnificent rings make flowers. They are gentle and charming. So realistic fulfillment that they seem to be alive. You can be inspired by any flower. Such decorations give the image of femininity and sophistication.
Animals and birds look very beautiful on the rings. Such rings are suitable for both children and adults.
Very stylish are fantasy rings. An excellent way to make an exclusive ring - to embody any idea in the modeling of plastic. Fancy forms and unusual figures will help manifest individuality and mood.
With a big beautiful flower
We will make a gorgeous ring with a large beautiful flower of polymer clay.
For this flower, there will be a blue, purple and white polymer clay. But you can take absolutely any combination of colors and create a ring according to your taste. Also need a rolling pin, a stationery knife, a glue gun, a stack with a ball, awl, a knife with a rounded blade. Fucking the flower on the metal base for the ring.
Blue and white clay take in the same quantity. Roll over the layers of the same thickness. On top of a white clay put blue and roll around the rolling pin so that they connect.
From purple clay, we form a cane and turn it off with rolled clay as shown in the photo.
We put a cane on a flat surface, slightly add. The opposite side of the knife along the canes make three grooves.
Article on the topic: Weaving baskets from a vine for beginners: how to weave your hands with video tutorials
Now the cane must be squeezed and roll out thinner, diameter to centimeter. Cut the cane on the plates.
Using a stack with a ball, pull the plate and form the future petal.
Now make it a concave form.
We make the first tier of the flower. Petals connect in the center and compare connections using a ball.
Now we will make the second tier. Petals have in a chess order, connect in the center and equalize the middle.
Also collect the third tier. Petals raise. In the middle we will make a small recess.
The fourth tier will do the same as the previous one.
The middle is made of three petals connected by brass.
Knife shorten the middle and fasteners in the center of the flower.
Flower assembled. Now we send it to the oven. Temperature and time are indicated on the polymer clay packaging.
We glue a gun with a hot glue base for a rings with a flower.
It turns out a wonderful ring with a big flower.
Ring-snake
Stylishly look at the rings in the form of a snake, which wrapped the finger. Make it very simple and can be even a newcomer. The snake can be made a monophonic, covered with sparkles or make from different colors of clay. In any case, such a decoration will look spectacular.
We will make a ring of black polymer clay.
We will need a wire, it is desirable not very thin, but to keep the form well. From it we do the basis. Bending a wire in the form of a snake and envelm finger. So you will learn what length cut off the wire.
Now you need clay "envelop" wire.
Carefully rolling the workpiece, gradually narrowing it to an end. From a small piece of clay, we will make triangles.
Triangle attach to the workpiece and form a snake head. Needle make eyes and nose.
Next, it is necessary that the clay is a little hardened and from it could be a snake. To do this, briefly put the blank in the refrigerator.
Article on the topic: Piece "Braided" with knitting needles: schemes with description and video
While the clay is hardening, we will make the basis for work from cardboard and scotch. Tightly wrap in a circle a finger with a cardboard strip and secure scotch. It turns out the basis of the cylindrical form. We will print it with napkins or foil. On this basis, we will form the bends of the snake.
The hardened clay blank is choke around the base, making beautiful bends.
We make the texture of snake skin with a needle or a tool for manicure.
You can also use a floristic mesh. Having put it to the clay, slightly pressing. But it is necessary to do it very carefully so that the snake is not deformed.
Instead of eyes, you can insert very little beads or tiny rhinestones for the nail decor. From a short string to make a split tongue. But this is at will.
Now we send snake to the oven. After coating with a varnish for polymer clay.
If desired, the snake can be made multicolored. Then initially you need to form a drawing of colored clay, carefully roll out so that the drawing does not change too much. Then, along the cut half blank and paste the wire. Then connect and hide the tracks of the connection.
Video on the topic
The video proposed below is described in detail the process of manufacturing a wonderful rings made of polymer clay.