For this task, quarrels, plinths, moldings with a flat or textured surface are perfectly suitable. Experienced masters successfully use the remnants and trimming materials, while beginners are better to purchase new ones, in order for the finished form of the frame, it turned out neat and comfortable.
Preparation of materials and tools
Fontoam plinth is budget, optimal for experiments, but it should be borne in mind that they are fragile and quickly crumble. Not everyone will cope with the tree, there will be professional tools here. Polyurethane foam products are durable, it is convenient to cut them, the high cost of solutions is leveled by flexibility and wear resistance.
Tip! The key parameter of the material selection is operational needs: light, compact photos and patterns can be framed, wood and polyurethane are optimal for artistic canvases made by paints.
For the manufacture of baguette, the following tools will be needed:
- acute knife - stationery or construction;
- hacksaw;
- line;
- Dense cardboard;
- Stuslo;
- quick-drying glue;
- marker or pencil;
- Putty.
For decor, we use water-emulsion and acrylic paints, brushes.
Step-by-step guide for assembly
Common sequence of work:
- Formation of the rear wall.
- Assembling frame base.
- Blooming billets and handling of angles.
- Decorating the facial part.
- Compound frame with rear.
In order for the design to be rigid, use a cardboard substrate: cut from a sheet of a rectangle that corresponds to the dimensions of the frame. On a white sheet of paper with the same cardboard, the window is performed by a window, cutting a 5 mm rectangle in height and width less than the picture. The image is inserted between two details - paper and cardboard - and glue.
Tip! Instead of a white sheet, you can use a similar piece of cardboard, the canvas does not need additional strengthening.
Processing and decoration of plinths
In 4 die-sliced plinth pieces form at the ends of the corners of 45 °, using hacksaw and stub, cuts are thoroughly aligned. After gluing parts, all irregularities and defects are masked using sealant, putty. Shakes and problem areas, if necessary, grind fine-grained emery. The billet should dry in a heated room for at least a day.
Article on the topic: How to issue a living room in Vintage style?
Next, you can begin to design the facial part, paints with gold, bronze, silver, copper metallized tint will be appropriate here. . The billet is ground with diluted PVA, after drying, cover interior paint, you can fix the effect by quick-drying varnish.
Frame with finished design must be fixed on the back. The cardboard substrate is covered with adhesive composition - polymeric or liquid nails. It is important to accurately connect the lower part of the future baguette from the top, with a compression of the detail. If the gaps were formed, they can further cover them with thin strips of the main material, all joints are desirable to fill with putty.
If you plan to hang a picture, you need to attach a loop or bracket to the rear surface of the baguette. The desktop design is equipped with an emphasis fixed at an angle, it can be performed from dense cardboard or plastic.
A dark frame, painted with black paint with dark brown or red, will become a spectacular addition of the interior. To get a light dairy gamut, use Ohru and Belil. The frame stylized under ancient is drawn up with the help of gold mortar water emulsion or acrylic paint, it is distributed by a semi-dry brush, sticking to the circular rhythm of movements. In this case, it is necessary to ensure consistent drying of the layers.
How to make a frame for a picture of the ceiling plinth (1 video)
Frame for painting from plinth (6 photos)
