The use of the door on the rollers is relevant where it is necessary to save space and the ability to hide the shift sash.
Causes of maintenance of standard structures
Suspended doors on the rollers
Among the many engineering solutions designed to save space, as well as various design design, the notable part occupy doors on the rollers. Roughly speaking, they are a simplified implementation of two standard constructs used to create a wardrobe sash.
Interior doors on rollers, thanks to the large mass, are quite smoothly moving, so the requirement for the accuracy of mechanics, as well as the complexity of the design of the fittings, is reduced.
Immediately, we note why interior doors with a mechanism and fittings of sliding systems of a classic type complusion system were almost ceased. The reason is simple: the mechanics provided strict requirements for the accuracy of the movement. The accessories were designed with the calculation of minimal backlash horizontally - we are talking about depth. Therefore, an almost indispensable condition was the use of lower rails with rather deep grooves for passing the supporting wheel.
It created many problems. If you walk on such linings, it did not imagine much difficulty, then modern household appliances, such as robots, vacuum cleaners, stumbled and stumbled.
Guides of sliding doors
In addition, roller rails located near the floor surface quickly collected dirt, clogged, which created an obstacle to movement, and also led to an increased wear of the reference element or even slipping the roller from the groove. The price of such fittings is noticeable, especially since it most often had to change the whole set.
The modern door on the rollers solves many of the following problems:
- Certain design options do not require the use of floor rails - efforts when installing the system is spent less, and the price of installation is lower.
- For compliance with the requirements for high accuracy of the web, the suspended doors in the lower part are equipped with a simple limiter of the flag type, which moves along a rather narrow groove in the floor.
- Hinged doors have the greatest backlash, therefore special bottom roller blocks are used. The restrictive detail is often found - the lining, screwed to the floor. The price of this solution is insignificant, compared with the cost of the rest of the fittings.
The mechanism of the hinged door on the rollers on the tube
- In the role of supports, such doors can use a simple furniture pipe, because it does not produce a large pressure. The price of the installation kit is reduced, the possibility of mounting with your own hands.
- Many sets of accessories provide installation with standard thickness. This allows you to turn simple swing flaps at the door on the rollers. The price is minimal, and all work can be made with your own hands.
The doors on the rollers differ in the type of installation, the principles used in the mechanics of movement.
Suspended sliding blocks
Completing suspension door on the rollers
This type of construction has several distinctive features:
- Pretty high accuracy of the stroke of the canvas;
- neat installation;
- Fully hidden top fittings;
- The use of lower support rollers, flag restrictor.
The construction is based on the construction rail. Her task is to hold the weight of the sash, passing it on the structural elements of the building. Suspended doors are conveniently mounted in wide passages, openings, as well as organize with their help interior sliding partitions. In this case, the power fastener is attached directly to the ceiling.
Suspended doors
A similar system can be easily mounted with your own hands, because only the skills of working with a drill and a screwdriver require. The slat canvas often does not require interference - inserts or other similar works. You just need to fasten the rollers to the end part, after which it is to turn them inside the rail profile. The final installation is the screwing of the top support, with the gradual movement of the door flaps. The result is in the photo.
However, despite the seeming simplicity and the ability to work with their own hands, the price of a kit for suspended doors is quite large. This is associated with technological performance. The rail has a complicated form, the rollers provide adjustment in conditions of great effort. But the beauty is obvious, because everything is hidden from the eyes, the doorway looks very stylish and neatly, which can be assessed by photo.
In addition, the price of such a kit is quite noticeable, suspended doors have a number of inconvenience. More precisely, these are the necessary requirements that must be observed.
Since the weight is transferred to the building structure, the corresponding elements are joined with the upper rail must have the necessary strength.
Suspended doors interior do it yourself
For example, if the walls are made of foam blocks, and the rail is attached to the overlap, it is better to make additional side supports of stiffness or mount the system in the power box.
Although the suspension system is neat, provides minimal clearances, high accuracy of the movement of the canvas, it is designed for the jiggle movement of the doors - one on top of another. Therefore, it is inconvenient to apply a similar solution in a limited width of the opening when it is impossible to remove the sash inside the walls.
Despite the good durability, limitations on the mass of the sash are. Depending on the accessure kit, it can be up to 100 kg.
Hinged options
Hinged doors with top rail
Another option, more structurally unstable and sometimes not quite convenient, offered mounted doors. The price of such a solution with an equal weight of the doors is much lower than that of the suspended unit. Most of the work can also be done with their own hands. However, the list of drawbacks is quite extensive:
- The lower part of the canvase is quite well, and the use of simple measures like a P-shaped wheel or a flag restrictor is not possible, since the load falls on the lower part.
- According to the design, they look like curtains. Movement along the wall does not allow placing furniture there, other interior items, which can be seen in the photo.
- It is very difficult to organize a circuit of the coupe, the movement of the doors in several layers due to the low accuracy of the stroke of the canvas.
- The gap between the wall and the sash is quite significant, so there is no sense of any serious conversation about noise insulation.
- Hinged products are an insignificant barrier for foreign smells, as well as drafts.
However, there are advantages that, along with the possibility of installation with their own hands, make such doors are quite comfortable.
Hinged doors on the rollers
- You can easily block the narrow opening, as shown in the next photo.
- Two sash successfully closes a wide passage, providing maximum space for public outdoor.
- The price of equipment of several sash moving on one rail or pipe is almost no different from the option with one door web.
- The structural elements used are simpler, which leads to the fact that the total price of work below.
The fittings of mounted doors can require both work on the insertion, and simply to be screwed to the surface of the door canvase, which is very easy to make with their own hands. The most common application option, when the price of the solution is minimal, involves the use of interior door as a shift sash.
Installation of the upper support also does not represent complexity. The furniture pipe is placed on special holders, and the rail with the possibility of hiding the rollers - most often it is screwed by the "Novosel" kits or the euro nails are nailed. As can be seen, it is work that is not difficult to make with your own hands.
If we compare hinged and suspended roller doors, you can note the greatest technostility of the second and significant simplicity of the first. However, what is the option to stop, depends on many factors. The magnitude of the doorway, the design of the room, the presence of free space, the strength of the building designs. Choose with the mind, take into account the little things, and the installation of both varieties of roller systems is easy and quite really performed with your own hands.
(Your voice will be the first)
Loading…
Article on the topic: Technology semi-drying floor screed with their own hands (video)