The doors made of veneer are very widely used in interroom openings. This is due to the beautiful appearance of such doors and their relatively low cost. But their inactive operation can damage the upper veneered layer, which can significantly worsen the appearance. In the event of a similar situation, it is not necessary to despair and resort to replacing the door leaf, you can simply make it repairs.
Veneered doors look fine, but they have a big drawback: they are very easy to scratch or impose a dent.
Common faults
The most common damage to the veneered doors is the appearance of scratches on the surface. Such scratches are 2 species. The 1st version of the scratches appears on the varnish surface and does not reach the veneer structure. The 2nd option is the appearance of deep scratches, the depth of which captures the structure of the veneer.
When the scratch of the 1st type is detected, the following materials will need to remove it:
- Retouching polyrolol (which contains natural wax);
- Soft rag or cloth.
Door canvas veneered doors.
The polyrolol will need to be applied to the area of the door, which was susceptible to breakage, and with the help of a soft tissue (vehicles) to launch into a scratch. The implementation of such a procedure is a simple occupation, but takes a long time. But the result obtained will help completely disguise the damage gained.
Such a flaw can be eliminated in another way, for this you can use a special repair lacquer. Such a varnish is in special balloons with an aerosol.
To perform the restoration, it is necessary to gently apply to the surface of the veneered doors. The canopy can be kept at a distance of 25-35 cm from the surface of the coating. When using a similar version of the door repair, the complexity of the selection of the desired shade of varnish occurs. But if you exactly choose a shade of varnish, then there will be no trace from damage.
Article on the topic: What wallpaper Select in the dining room
Elimination of deep scratches and chips
In the event that there is damage in the plane of the veneered door in the form of deep scratches, its depth should not be more than 2 mm. Then it is necessary to use the wax pencil to repair this flaw. A similar pencil must be chosen into a tone of the veneer of the door cover.
Finding the pencil of the required color, you need to preheat it. To do this, it is required to be lighted with his palms, and then rub into scratch. You need to perform this procedure very carefully and neatly so as not to damage the material around the scratch.
Remove scratches from a veneer can be using a polyroli containing natural wax.
It is necessary to perform the wax with a wax pencil until the wax starts to perform above the veneer material. Next, you need to cut the extra wax using a knife and, using the repair lacquer, completely eliminate the scratch. If everything is done correctly, the flaw will be practically not noticeable.
It is only necessary to remember that if the depth of the damage is more than 2 mm, then it will be impossible to get rid of it. In this case, you will have to replace the entire veneered coating.
When a chip or hole appears on the surface, the elimination of it is performed using a patch. Patch must be made by contour damage. To accurately copy the damaged area, you need to impose on its plane for cigarette paper and with a pencil to shame.
After that, it is necessary to put a veneer on the resulting sample and cut it exactly by the template. After that, the patch is glued to the material of the doors with the help of PVA glue. In order not to be visible to the gaps between the patch and the blade repaired, it is required to use a pencil from wax, and then you need to put the lacquer.
Performing the repair of the door cover, it is necessary to take into account the cost of work. It often happens that the cost of the new door will be equal to the cost of repair work.
But if it is decided to repair the repair, then it can be done independently, for this it will only need a little free time and a droplet of patience.