Ceiling eaves is used for fastening of tulle and curtains. Modern devices for curtains are made from different materials, but most often from PVC - polyvinyl chloride or, simply, plastic. It is a hollow bus and several working lines. Before hanging the ceiling cornice, carefully read the instructions from the manufacturer, which is included. Such a device has a weight limit, pay special attention to this. If you hang curtains on it, the weight of which is higher than the permissible norm, all the fixture for the curtain can collapse under their weight.
Fastening the plastic ceiling eaves for curtains to the ceiling.
Types of plastic karnisov
Before hanging eaves, it will be nice to deal with their varieties, they differ first of all with their design, there are 4 varieties:- Single row.
- Double row.
- Three-row.
- Four-rowed.
They also differ by the attachment method, there are two:
- On suspensions or brackets.
- Through special holes in the ceiling device.
How to choose a cornice
Ceiling cornice assembly scheme for curtains.
Before you correctly hang the ceiling cornice, you need to decide on its choice - size, color, design. Naturally, he must fit in his design in the overall interior. Pay attention to the construction of the design, it can be both wall and ceiling, do not make a mistake. Before starting installation, make measurements of the window opening, over which the design will be attached. Before hanging eaves, decide also with the curtains that will harmonize in the overall picture.
If the cornice is attached to the wall, consider such moments:
- Free opening-closing of the window if necessary, that is, the attachments should not prevent the free movement of the window to achieve this, simply position the wall mount by several centimeters above the window;
- The device for fasteners of the Tulle must be distant from the wall so that the curtains do not hurt the handles of windows and did not fit the heating batteries;
- If you are planning the use of multi-layer curtains, measure the distance from the wall from the nearest to the layer window.
Article on the topic: Rating of the most famous manufacturers of kitchens in Russia
However, these tips are relevant for the ceiling attachment method. To find out the length, you need to hang eaves and see what is optimal for you. It should be such that completely spread the curtains do not prevent the opening of windows. Observe the distance from the window frame to any end of the cornice, usually about 40 cm is quite enough.
What material to choose a design for curtains
Correspondures with a chain lifting mechanism.
When using heavy curtains, the construction of metal or durable plastic is best suited. It is attached to the wall through the holes in the tire. Choose a bus with so much tracks as planned layers of fabric.
What materials do we need? To carry out any work requires tools. To hang the cornice, we need a standard set of tools, such as:
- Hoven for metal;
- Corolnic;
- electric drill;
- Perforator and drill on concrete;
- drills of different diameters;
- pencil;
- a hammer;
- Dowel and selflessness.
How to make fastening
We already know how long the cornice is needed. Cut the desired length with the help of hacksaw and the square. Then make a construction assembly. To do this, shove the hooks into special grooves and close the ends of the device with plugs from the kit.
Further, before hanging the cornice, we will need to drill a hole in the center of our device for tulle and curtains.
You should start drilling from the front side.
Scheme of fastening the ceiling eaves on a plasterboard ceiling.
First, take a shallow recess with a large drill to hide the fastener head in this hole, for example self-proof. Then drill with a smaller diameter drill through hole in terms of fasteners. Depending on the design length, drill several such holes. Note that the heavier the curtain material, the greater the holes should be that the eaves can safely withstand the weight of the fabric fixed on it. Now you can hang the ceiling cornice. Even before this, you can make 2 rows of fastening holes, it is the perfect option for heavy curtains.
Article on the topic: Bedahin over the bed: species, pros and cons
Next you need to hang the cornice horizontally to the ceiling. With a pencil, make a mark on the ceiling through the central hole, which just drilled. Drief Drill the hole in the ceiling in the marked place and drive a dowel into it. Secure the design using self-press. Now he keeps the ceiling exactly in the center. Next, you can safely put labels on the ceiling for all other holes. We do everything just like with the central hole:
- We make tags on the ceiling under all holes.
- Insert a dowel in them.
- Fix the design with self-draws.
That's all the recommendations on how to assemble the ceiling eaves with your own hands. Work on its installation is completed - you can hang curtains and tulle.