No children's holiday costs without a negative character. Baba Yaga is considered a popular fabulous hero on matinees. If the chance fell to play a harmful old woman, you should carefully pick up a stylized suit. As an outfit, an Alyapish Balahon with outer patches from burlap. But how to be with makeup? In order for the character to be guessed at first glance, it is necessary to acquire a characteristic hooked nose. Make the nose of the women of Yaga with their own hands much easier than to look for a similar accessory in stores.
Textural work is obtained in the manufacture of the nose using plasticine and paper. In order to the attribute served more than once, it should be done high quality and not in a hurry. At the same time, a fantasy is welcomed, which individualizes the accessory and attracts attention.
Characteristic hooking
The most acceptable technique of making crafts - papier-mache. This method allows you to fulfill the detail of the desired form and give it the believability. At the last stage of decoration, you can attract a child.
Before the start of the creative process, it is advisable to view several illustrations with the image of the Yaga women to make a complete picture of the upcoming work on the cradle.
Need to cook:
- Old newspapers;
- Plasticine;
- Acrylic paints (or gouache) of corporal color, brushes;
- PVA glue;
- Vaseline (can be replaced with liquid soap or oil);
- Thin gum.
It should be pre-decide on the value of the nose. To do this, take a centimeter tape and, putting it to your own person, break her nose. So it turns out the desired diameter of the circle. From plasticine, a detail of the required form is wound. A wide part of the workpiece must comply with previous measurements.
The central part of the nose is slightly strung down, forming hooked.
The resulting form is treated with vaseline over the entire surface. It is necessary to prevent sticking of paper layers to the plasticine. The newspaper is torn or cut into narrow strips of small length.
Article on the topic: Knitting for children: Knitting diagram of two models of hats
Clay can be diluted with water in equal proportion. Newspaper pieces are dipped into the glue composition and alternately apply to the plasticine blank.
At the same time, the paper must completely close the plasticine, and therefore the strips are superimposed.
After applying the first layer, repeated layers of the newspaper described above are followed. When the workpiece is placed 4-5 layers, the work stops. The item should be carefully dried.
Plasticine is neatly removed from the hardened workpiece.
It remains to paint the nose. Paint must completely cover the surface of the product. In order for the newspaper cuts through it, the paint should be applied in two layers.
When the nose is dry, you can create wrinkles on it with a thin brush or draw warts.
From two sides of the workpiece pierced holes. In such a job, it is more convenient to use awl. Thin gum is fixed in the holes.
The length of the gum is measured, based on the circle of the head. Stylized attribute is ready to use.
The created nose will help to supplement the image of not only the Yaga women, but also perfectly goes to a kimor's costume or lash.
In the absence of time before the presentation, the characteristic accessory can be quickly built out of paper. To do this, it is enough to turn the paper sheet with a cone and put it along the extreme slice.
The central part of the cone bend so that the pointed part "watched" down. Coloring the nose with any pencils or markers. Put on the sides of the ends of the gum and consolidate them.
The Yaga Baba image is used not only on ideas. Needlewomen manage to create dolls repeating the famous fairy tale character.
The most painstaking work on the doll is the creation of her face. Proper mapping of characteristic features is the key to the fabulous hero. Dolls are performed in different techniques. On the wave of popularity - soft products, in which categorous tights are used.
A significant part of labor in the sewing of the Baba Yagi from the tights is considered to be the exact execution of the nose lines, cheeks and eyebrows.
Article on the topic: Beaded tulip for beginners: master class with video
Because of the soft material, it is difficult to create a hooked nose, in dolls of this type, it, as a rule, consists of a wire base, covered with syntheps. First, the wire is strung out in such a way that it resembles a bent nose.
Wire is wrapped with syntheps and sewn to the head.
The synthetic preparation billet is covered with a cap (in the work, tights, stockings, golfs are used). So that the nose accepted the necessary shape should be filled with threads.
The needle is conducted from the beginning of the nose to the right left. During the work, the thread is subject to tension, forming a convex bridge, as in the photo.
At the bottom it is necessary to expand the step of the needle. It remains to create nostrils. At the end of the work on the needle's bridge, the negle was introduced and tightens the fabric, forming the lower part of the nose. The process is duplicated on the other side (for the second nostrils).
Such technique can be created by the necessary accents on the face of the conceived character and give it a characteristic facial expression.