With long-term operation of the bath, increasingly starts to attend the question: how to make a white-white bath? At first glance, a very simple and not requiring some huge knowledge is, however, the successful result of the work done directly depends on the type of bathroom and applied means for cleaning. You can see the surface of the bathroom to shine, and just spoil the coating.
Types of pollution
Highlight Three main types of bath pollution:- Conventional pollution.
- Yellow raid.
- Mold.
Common pollution, as a rule, appear due to the lack of proper care for the plumbing. In this case, it becomes much harder to clean the bath than with proper care. For this reason, it is recommended to wash plumbing devices at least once a week. With such a bathing, the bath will maintain its snow-white look for many years.
Yellow rings most often appears Due to low water quality . There may be rust, and the high content of chlorine in it, which negatively affects the surface of the plumbing. Unfortunately, this factor is irreversible. Therefore, in such situations only careful bathroom care saves.
Due to the overaffect of moisture in the room of the sanitary assembly, there may be on the surface of the facing materials of walls and ceilings, and the enamel of the mold formation, or even worse than the appearance of fungus. It is dangerous to develop various bacteria that can be unacceptable to influence human health. In this case, it is worth thinking not only about the care of plumbing, but also about replacing or improving ventilation indoors.
Article on the topic: Warm Plinth Electric: Infrared Option
Cleaning products for baths
Depending on pollution and type of bathroom exists Many different means and methods . It is necessary to know what is intended to avoid very unpleasant moments. The most common bath cleaning agents:
- Liquid cleaning agents.
- Powder.
- Prudial, or homemade cleaning accessories.
Liquid cleaning substances
This is all familiar gels and sprays. It can be said that such substances are quite effective. However, this efficiency is that the bath is cleaned, not in a very started state. It will be quite difficult to clean the mud gel. Such substances are good to use for prophylactic cleaning, for example, weekly. Liquid cleaning substances divided into three groups:- Chlorine-containing.
- Without chlorine.
- Acid-containing.
Chlorine - acid-containing cleaning solutions are more effective due to the presence of active components. Acid and chlorine have excellent cleaning abilities. However, it must be remembered that the excessive use of such household chemicals can lead to an enamel defect. It can be both darkening and the destruction of the whole layer. Such household chemicals must be used to clean strong contaminants to subsequently use softer accessories.
Cleaning accessories that Do not contain chlorine And any acids do not harm the coating of the bath. Accordingly, this chemistry is not so effective. For this reason, such cleaning agents are used in preventive purposes.
Powder cleaners
Powder or abrasive cleaning products are no less common than liquid. In its composition, chlorine can also bear. The effectiveness of such chemistry is to actively work with hands and sponge. Therefore, the powder does not use a great relevance. It is also necessary when working with such means to exercise caution, since due to the presence of particles of a large fraction you can spoil the surface of the bath. To avoid this, there are several simple secrets. To prevent damage to enamel, cleaning powder is slightly diluted with water so that the pasty substance can also Supplement soap And detergents for dishes. This improves consistency and cleaning properties.
Article on the topic: We make a beautiful rug from old things with their own hands
Protective cleaning products
People discovered such funds today a lot. The main advantage of such funds is that they are almost everyone in the house, and the price of them is significantly less, if you buy in the store, unlike specialized cleaning products.
Basic cleaning products which can be found in the house:
Lemon juice or acid.
- Hydrogen peroxide.
- Toothpaste.
- Baking soda.
- Table vinegar.
- Toilet soap will also quite fit liquid.
- Ammonia.
Cleaning solution from soap and ammonia alcohol
Such a mixture is excellent Suitable for enameled baths . In order to make such a solution, it is necessary to mix half a glass of liquid soap with several drops of ammonia alcohol. The bath is slightly moistened and treated with cooked solutions. After 15-20 minutes, wash off all the water. Such a simple cleaning solution will save from a permanent question how to make a white-white bath.In the case when the dirt has emerged, you need to use soft brushes and sponges. The use of coarse accessories can lead to a damage of enamel bath. Also, when performing work, you need to use rubber gloves to avoid irritation and preferably a respirator to prevent inhalation of ammonia vapors.
Cleaning material for soda and bleach bath
To make such a breach for bleaching the bath, you need to take Ingredients in the following proportions: Food soda - 2 tablespoons, calcined soda - 2 tbsp, vinegar - 50g. And bleach 50g.
You need to mix the soda and grasp the moistened bath. Then mix the vinegar and bleach, and after 10 minutes, without flushing with the bath soda, apply the solution. Wait half an hour, then with plenty of water, wash everything. This solution, though made at home, however, after it the bath will simply be snow-white.
Cleaning solution based on liquid soap and food soda
To prepare this composition you need to take a liquid soap and soda half of the glass. Stirring gradually pour soap into soda. Stir before forming a paste. It should be cleaned with a soft sponge with a soft sponge, then wash off with water. This solution is usually applied in cases where the bath has not contaminated so much.Cleaning with citric acid
This solution is used to remove yellow spots from the bath surface. It is enough to make a solution of citric acid and water from the calculation 1 bag for one glass of water . A soft sponge to handle the yellowed sections of the bath and leave for 10-15 minutes. Then wash off with water. The solution is very primitive in its composition, but despite this bath will acquire a much more pleasant look. Also, working with such solutions does not need to forget about rubber gloves.
Article on the topic: How to make installation for the production of foam concrete with your own hands