Every person in his life sooner or later faces the question: how to remove the testimony of the electricity meter, if nothing is clear. Of course, there are simple situations when it is enough just to write all the numbers and pay for them. But, it happens and so, when it is not clear how to remove the meter readings, which considers different tariffs (day-night), has incomprehensible values or an electronic counter on the dial. In this article, we will consider all these situations and teach you to consider readings correctly. If you think you know everyone - you are mistaken, there is a mind of moments that you should take into account.
How to Remove Indications from Modern Counters
As a rule, it is with modern or two tariff meters of more problems. In fact, no, it is easy to read the testimony. They consider such counters in automatic mode, there are no familiar rotating disks and dials. A simple display is installed, which in some modifications shows another kW / hour and even the time of work, takes into account the flow at a certain time of the day (day-night). It is possible to save cool, if you use the electric meter with a remote control, but there are some significant drawbacks.
All these readings can be removed without any problems, just follow the following recommendations:
- Finding the instructions where all the values are denoted on this meter. As a rule, in it you will find a tip, but we look further and perform simple steps.
- Click "Enter" using it you simply select the desired parameter.
- If you have a single-tariff counter, then remove the value - T1, if the two-time, then T1 and T2, respectively, three-tariff - T1, T2, T3.
- Take the testimony from last month.
- Transfer reading.
Article on the topic: Inlet valve washing machine
Watch the video, how to read the testimony from the Mercury counter.
A similar way you can take out the testimony from Mercury 200, Cascade, Energy Momer, Line Electro, Neva, Micron, etc. As you might notice, there are no problems, it just needs to know.
How to Remove the Electricity Meter of the Old Sample
If you have an old induction electricity meter installed in the house or on the post, then the disk is constantly spinning on the front panel, which considers electricity consumed. To take readings from it is always easy, perform such actions:
- Write down the values.
- This value take away from the testimony of last month.
- Ready result multiply to your tariff plan. For example, your tariff plan is 1.2 rubles, if you wrapped 100 kW, then the amount of payment will be 120 rubles.
Be sure to listen to our advice, removal of the meter readings does not end. There are tricks that you should always take into account necessarily.
Remove the readings of the old sample counter only to the comma, see photos. The last digit (red) is never taken into account.
See which testimony you should get - "000004" kW / hour. Do not take the last number.
Video, how to remove the readings of the electricity meter of the old sample.
And of course, we convey all the testimony into the relevant authorities. Based on this, there will be a receipt for payment. As you might notice, there are no difficulties, see the video, how to read the readings from the electric meter of the old sample.
Everyone should know
Now we will tell you how to remove the readings of the electricity meter, if something went wrong. Here we will look at all non-standard situations, and tell you the way out of them.
- If the counter started spinning through the second circle, it is possible to remove the electricity readings using a simple tip: add to the existing number one ahead and take values last month. Let us give a simple example if you have a five-digit board written out our value, add a unit to the beginning. Your number was 00005, here such a number should be 10005. We take a number for last month, for example, 99915 and solve a simple example. 10005 - 99915, it turns out 110 kW / hour. The same situation with the rest of the dials, regardless of the number of numbers.
- What to do if there is no comma on the counter. There is such a situation, just look at the photo below. If you have such a meter installed, then you should initially clarify all moments or read the instructions. Of course, if you applied for help to us, you did not exactly do it, so if there is no semicolon, we begin to look carefully at the dial. The scoreboard should differ in color or somewhere should be a prominent comma. If all this is not, then write all the indicated numbers from the meter to the receipt, it doesn't matter how many.
- Three-phase and single-phase counters are no different from each other, so remove the testimony from them in a similar way.
- For each month, you can install the meter at home, you can install a modern ASKUE counter, it automatically considers all the readings and transmits to the serving organization. You will need only timely pay bills.
Article on the topic: The cabinet to the hallway with your own hands: the master class on the manufacture of the cabinet
So we considered the question of how to calculate the monthly consumption of electricity, as you could notice, there is no complex. If you have any questions, ask us, we will gladly respond to everything.
Article on the topic: three-time electricity meter.