The lining of the balcony by siding performs not only the enormous function, but also protects the design from the impact of natural factors, than to perform the glazing of the balcony, it should be sewn. In this case, siding is increasingly used. And you can do it yourself, not attracting specialists. It should be noted that if the balcony has a concrete fence, it is better to resort to professional assistance masters. Metal frame allows you to spend work without climbers. The decoration of concrete fence by siding with their own hands can be dangerous without the use of special equipment, skills and skills.
What is the balcony overlapping outside
Touching the balcony, loggia siding outside performs not only a decorative function. Of course, it attaches a special presentable type of facade, but at the same time acts as a protective structure from negative weather manifestations, environmental impacts. These factors affect the duration of the operational period.
Outdoor decoration of a balcony or loggia siding helps to control the humidity and temperature indices indoors
The balcony or loggia does not fall through Siding the wind and moisture, which warns the occurrence of fungi and mold.
What do you need:
- Electric drill;
- Level;
- Hacksaw;
- Screwdriver;
- Mounted knife;
- Pliers;
- Wooden bars panels;
- Siding stripes.
The amount of the acquired material depends on the balcony area, but in any case, it is better to take with a margin. Siding stripes are a perforated material.
Siding outdoor casing, warm glazing and internal insulation will make a balcony for use
Through the holes, the sheets are strengthened among themselves, there are still installation on the main framework.
To see siding balcony, the loggia should be attentive and careful. Torn the strip bands independently install it will not work. By the way, all described manipulations are conducted through the metal lattice balcony or loggia frame.
Article on the topic: Folding table with your own picnic hands
Preparatory stages: what is first
First you should remove the railing, facing. Fasteners are cut off with a grinder. After you need to examine all the joints, if you need some fool.
To knock down the remnants of cement along the lower edge of the balcony island, so that one-piece concrete remains.
Next, using a metal brush, if possible, remove rust from the lattice, to brand it and paint it. Then check the level of the outer edge, which is behind the fence around the entire perimeter of the balcony.
Exterior decoration of the balcony by siding with their own hands should begin with the preparation of space
The next step is to assemble the bottom belt that will be installed for the balcony. For this, they will need transverse bars (from 3x3 to 6x6 cm). They need to cut the formation along the length, narrow ends to the wall. Connect them between themselves with nails. Mandatory condition - wooden bars must be treated with primer and antiseptics in order to avoid the appearance of fungus and mold.
To the concrete base of the balcony, the lower crate must be attached by the construction glue. It is attached to the rods to the rods (galvanized) or wire. The inner lower edge of the support bands is filled with mounting foam.
The upper support belt when wearing siding outside, it is performed in the same way, but special attention is paid to the fastening of it by the wall. It is better to do this with the help of metal segments and screws, one edge of which is fixed on a wooden beam, the second is attached to the wall.
How much is high-quality siding (video)
Finishing balcony siding with your own hands: Step-by-step instruction
First of all, all planes are leveled. Rakes are installed on the metal fence. Each corner rail is exhibited vertically.
So that siding is adjacent to the wall, you need to use end J-profiles, for compounding planes - special outer corners
Next, you need to perform the following steps.:
- Copper guides are recorded (diameter more than 2 mm). Such a type of fastening is the most reliable - every year the wire will cut deeper into the wooden bars and stay even stronger.
- Elastic corners are attached to the lower edge so that there are no bodies and insulation. In addition to protective properties, they perform a decorating function - the balcony becomes completed. Experts recommend using only factory material.
- Siding is the sheets that have upper and lower bends. Thanks to these bends, each of the sheets can cling to the previous one. The bottom of the 1st sheet is secured on the installed starting profile. If you close the bottom with screws, the siding sheets will not be able to expand, squeeze under the action of a changing temperature, which will lead to a decrease in the guides in winter and the formation of bubbles on sheets in summer. The finish is carried out using tight fixation of the central part of the sheets.
- Be sure to leave the reserves of the upper sheets, which will cut off after the frame is mounted. The process of installing siding sheets is simple enough, similar to the collection of the constructor.
Article on the topic: Earth calculation programs
Singing is cut down so that the gaps remain in J-profiles and angular connectors
Preliminary work and installation of the framework on which siding will hold.
What siding to choose
Today, an increasingly painting and finishing with your own hands is performed by vinyl siding, when a person decides to see the balcony. This is explained by high quality material, and low cost. It significantly transforms even those balconies and loggias, which have not been repaired for a long time and have not been updated. The balcony can be made with imitation of bricks, wood, stone thanks to fantasy manufacturers.
Depending on the characteristics, you can divide siding into three groups: triple, double and single
The benefits of material can be attributed:
- It is not necessary to additionally be covered with antiseptics or primer, since building material is resistant to the effects of fungal microorganisms, the process of corrosion;
- Siding does not shift the deformation when the temperature drops, if it is properly installed;
- Siding for balconies and loggias is resistant to low damage;
- Does not conduct electrical current;
- Has good noise insulating, waterproofing characteristics;
- Cyding vinyl sheets are biologically inert;
- Siding a balcony or loggia with their own hands, without the help of specialists simply and not long, the only restriction is insurance in the presence of whole concrete fence on the balcony or loggia;
- There is a wide variety of colors and textures that allow you to create any balcony design;
- Building material does not change color for a long time.
Some people suggest that after installing siding, when exposed to low temperatures, steel appear on the surface of the crack. It should be noted that it does not depend on the quality of the material. Siding sheets are not subject to strain from frost or ultraviolet rays. The instructions from manufacturers suggests that Siding has a resistance rate ranging from -50 + 500 C. It's all about improper installation.
Article on the topic: how to install an acrylic bath
Siding sheets are environmentally friendly, which, during decomposition, do not produce and do not distinguish harmful substances.
To understand how to install siding to the balcony, it is better to explore the video lesson in which specialists tell all in detail.
Of the disadvantages of the building material, it is possible to distinguish the possibility of deformation at a sufficiently strong mechanical effect. They are also not subject to repair work. If a heavy item has occurred, some parts will need to be replaced. But, at the same time, the entire design will have to be disassembled.
Touching Balconies Siding Outside: Options (Video)
Another minus - the balcony with siding is not a fireproof, so the inner decoration is better to carry out other materials. It does not have the ability to dissect fire, but at the same time it is a rapid melting.