No matter how much the opposite claims, but shook wallpaper without visible joints is determined not only by the master's skills. There is a good result when the wallpaper is saved in the junction can be achieved, without being a professional and not even making significant efforts. But for this you will have to find out some nuances.
Scheme for calculating wallpaper on the room.
Experts argue that the results of the salary affect: 70% - the quality of the walls themselves and 30% are the skill of the artist. There are quite a lot of situations when the joints are formed, no matter how much efforts have attached for their level. And the point here is absolutely not in skill. Camping technology can be performed according to the rules, but will influence the properties of the acquired type of wallpaper. This fact should be adopted as a given. By the way, the price of the roll is not always a reference point. These nuances should be considered. Therefore, it will not be superfluous to arma some information, starting to choose a material.
What to pay attention to when choosing wallpaper?
So that the joints on the surface were not as noticeable, it is recommended to paint the places of the intended seams of the paint of the appropriate shade.
- Edges. If the wallpaper you like have a dark color, then look at their edges. They should not be narrow strips of a light shade. The width of such a strip is insignificant, but it will noticeably designate joints. And when two panels are combined nearby, the width of the light strips increases. Light edges are a factory marriage, and quite common. Specialists assure that expensive wallpapers can have a similar defect. Therefore, once again we emphasize that the price of the material is not the parameter to which you want to pay attention to when choosing.
- Relief surface. All wallpapers are two categories: smooth or relief. The first is quite demanding to the fixes of the base. If the walls are not covered and have irregularities, they do not disguise them. On the contrary, they emphasize. This group includes vinyl and paper types, as well as photo wallpapers and silk-screen printing. Pocking smooth wallpapers regarding docking is complex: joints can be well noticeable even subject to excellent wall preparation. Smaller whims have to be expected from embossed canvas. This group includes vinyl, separate types of paper and options on the phliselin basis. They reliably hide the flaws of the preparation of the surface, sometimes significant irregularities. And than the convexity of the relief is more, the efficiency of the material in this regard is stronger. In many cases, joints are obtained without problems. The most successful option is the texture wallpaper "Stolomka". Their sticking gives a 100% guarantee that the joints will not be distinguishable.
- Colors. In more than 90% of situations, the wallpaper of light tonality is better attached. Sewaged joints or simply toasting the left gaps on a dark background will be visible as on the palm.
- Roll width. The most popular width is 53.0 cm and 1.06 m. Wider Wallpapers have a smaller probability of bad dashes, at least just for the reason that there are fewer bands.
- The embossed wallpaper with vertical stripes is very good for docking. A striped drawing also masks the joints of the junctions.
Article on the topic: How to independently install the inlet wooden door
Piggy bank of ideas for home repairs
The circuit of the cross movement of the roller when applying glue on the wall.
Methods are known that allow you to get the minimum visibility of the joints. We list them.
Method First: Asymmetrical connection of vertical strips
It may seem that the alternation of wall strips is a designer idea, an interior decoration option. In fact, a variety of applied functions is hidden behind such an applied, including concealing inconvenience of planning.
Situations that without combining will simply do not cost:
- High walls in small-sized space.
- Disproportionality of length and width (for example, room is narrow and long), which creates clear difficulties in the placement of furniture.
- Visual combination of adjacent rooms (for example, living room and kitchen).
- The distinction of functional zones in a large room, not attracting objects of the situation and other accessories.
- Focusing the element of the interior or just one wall, protruding the background for the designer composition.
Method of the second: horizontal combination of large and small drawing
Scheme of proper finishing of the walls.
To shove the wallpaper completely without visible joints, it is possible to resort to this simple one at first glance.
The walls are separated horizontally into two components (not necessarily uniform) and are covered with wallpaper-companions. This combination option will make it possible to make less high ceilings indoors.
A more classic option is to combine monophonic and striped materials or small and large patterns.
The wall surface in most situations is divided in the ratio of ½ and in accordance with the mood of the designer is covered either from top to bottom or bottom up (in proportion 2 / 3-1 / 3).
Demandors of various types of materials can perform decorative molding, border, bar. Something choose something, focusing on the thickness of the materials and the designer design of the room.
Third way: the connection vertically different wallpaper
Another option is known for sticking wallpaper in the joint on the walls - with the vertical separation.
Article on the topic: Varnish for parquet: how to choose without odor, quick-drying coating, polyurethane parquet varnish, how many layers apply
Procedure for plating wallpaper.
- Uniform combination of two colors or textures, while the bands alternate through one or two.
- For a visual increase in the width of the room, an asymmetrical alternation is used: the surfaces are covered with a background material, and then on demanding expansion the walls are glued with wide strips with an accent tint (on the same wall - in the center, on the other - near the corner).
- Symmetry. In both directions from the middle of the room on the long walls, two bands with a bright shade or a selection of texture are glued. This technique allows you to visually reduce the length of the room.
- "Accent Wall" - reception for vertical combination. One of the walls that does not get the speakers or which acts as a background of the main element of the interior, is covered with a bright shade of material, winningly looking among the other samples in the room.
Instructions for seamless sticking of different types of wallpaper
Wallpaper wrapping scheme in corners.
- Paper. They are glued to the flashes of about 0.5 cm. On the floor, the wallpaper canopies and apply glue on it. After that, evenly applied to the surface of the wall and smoothed. Sticking paper bands delivers a lot of trouble. Their quality is much lower than other types of wallpaper, therefore, the cost is appropriate. Here it is impossible to break, especially when the glue on the canvas is already applied. It is important to prevent paper deformation. What should be carefully read with the recommendations available in the applied instructions.
- Fliselinovo-vinyl. They have the quality of the middle class, the cost within the available. As the wallpaper is completely safe, they are allowed to glue even in the child's room. Strengths are superior to paper, but inferior in it vinyl. The canvas glue the mustache approximately 0.1-0.2 cm. If the glue is applied straight onto the wall, then glue into the joint. Flizelinovo-vinyl materials permissible to paint with waterfront.
- Vinyl. They are blocked the easiest way, and make it a jack, not leaving the gaps between the canvas. Use special vinyl adhesive for glowing heavy wallpaper. The glue is applied solely on the wall, but not on the canvas. The gluing procedure takes at very little time. This species is not stretched, does not break, it is well stacked on the wall, but it dries a long time. After sticking, it is followed that there are no drafts in the room. Otherwise, you can see the wallpaper on the floor.
Article on the topic: put in order an old bath
How to literately glue joints?
There are no special secrets in this matter. Experience comes with practice. Many specialists combine the canvas on the machine or intuitive. Although in general the eyes of a third-party observer, this procedure may look like this.
Begin to glue every new strip from the junction, trying to fit it as close as possible.
If in some place and a small empty space is formed, it is later removed later.
The next step is to straighten the canvas, it is not necessary to completely fix it at this point, because the removal of the entire amount of glue from under it will deprive the possibility to slide wallpaper on the surface, and then the two connected policies will still be disadvantaged after drying.
After straightening the canvas, the joint itself is tightened using your own palms or plastic spatula. The remnants of the adhesive are trying to squeeze towards the joint. It is important not to stretch the wallpaper strongly and not to press it hard on them. Especially this item relates to thin products.
Above it is described how to bleach wallpapers on the walls in the joints of the joints. Misunderstandings should not be.