Conditioners are well helped to transfer heat, but if they are able to purchase them, no, and the reasons independent of you cannot be saved, the simple versions of air conditioners can be saved, which can be used. The principle of operation is elementary and is built on the use of fans.
Master class number 1: air conditioning from bucket with their own hands
This simple design will save you from the heat in the rooms of a small area. The fan, in it used will be driven by cooled air. Details how to make air conditioning from bucket with your own hands in step by step instructions.
Materials
To work, you will need:
- Big plastic bucket with a lid;
- PVC pipes, 3 cm diameter;
- small portable fan;
- knife;
- hacksaw;
- Caunist with chilled water or ice;
- pencil;
- foam bucket.
Step 1 . Attach the fan to the lid of the bucket and circle it at the outer edge of the pencil.
Step 2. . Cut in the lid bucket hole, according to the planted line.
Step 3. . Remove the feet legs. If they, as in this case, are not removable - cut them with hacksaw.
Step 4. . Insert the fan into the bucket cover.
Step 5. . On buckets of plastic and foam plastic, take a point where there will be holes under the tubes that are inserted into the room cooled air.
Step 6. . Up the holes at the outlined points, selecting the size of the annular drill under the diameter, harvested PVC pipes.
Step 7. . Cut the PVC pipe on a part 7 - 10 cm long.
Step 8. . Insert the foam bucket into the plastic, and send the battered tubes into the holes.
Step 9. . Round hole for the fan cut out in the lid bucket made of foam.
Step 10. . Collect homemade conditioner. To do this, send to the already assembled base of the canister with ice or highly cooled water. Close the design with covers and turn on the fan. Ready!
Article on the topic: Mosaic do it yourself from tiles in the bathroom: how to make with photos and videos
Master class number 2: home air conditioning with his own hands
This simple fan will be a longer option than air conditioning from the previous master class. However, due to the use of the pump, it will be more expensive at cost. Depending on the power of the fan, such a home air conditioner collected by your own hands can lower the air temperature even in a large room.
Materials
Before you start work:
- fan;
- screwdriver;
- knife;
- scissors;
- packing of cable screeds;
- copper tubes;
- vinyl tubes;
- clamps for hoses;
- cooler;
- A small pump with water cooling function.
Step 1 . Take the copper tube. Roll it in the form of a spiral, trying to evenly distribute the coils along the front of the fan grid. Fix the turns using cable ties.
Attach the vinyl tubes to the ends of the copper. Fasten them well with special clamps for hoses. On the tubes will circulate water and it is important that the design does not flow anywhere.
Step 2. . Tubes attach to the pump.
Step 3. . In the cooler, type water and connect the pump. Run it. Give it to work for 3 - 5 minutes so that the circulating water is cooled. After that, you can turn on the fan. Pleasant coolness in the room is guaranteed.
Master class number 3: air conditioning from bottles with their own hands
This air conditioner from the bottle collected with its own hands is cheap and elementary in the manufacture of the way to cool the air in the room of a small area.
Materials
Before making air conditioning, prepare:
- small fan and power supply to it;
- 5-liter plastic bottle;
- knife;
- marker;
- ice.
Step 1 . Put the bottle on the side, attach a fan to it and circle it around the perimeter with a marker.
Step 2. . On the outlined lines cut the hole.
Step 3. . In the covers area, you slow down another hole for air output.
Step 4. . Insert the fan into the harvested hole, connect it.
Step 5. . Fall into the bottle ice and turn on the fan. Ready!
Article on the topic: A gift to a man with his hands from sweets: Master class with photos and video
Master class №4: air conditioning in the car do it yourself
Spending a lot of time on the road and without air conditioning in the car or not wanting to drive it throughout the day, you can use this simple version of the air conditioner into the car, to collect that do it yourself is not difficult at all
Materials
You will need:
- Matching mini refrigerator;
- 12-volt fan;
- PVC knee and adapter to it;
- power cord with cigarette lighter connector;
- plywood sheet;
- screws;
- ice;
- hacksaw;
- roulette;
- sandpaper.
Step 1 . From the sheet of plywood you need to cut the lid for the refrigerator box. It should close tightly.
Step 2. . In the lid of plywood cut two holes - one under the knee, the second is under the fan. These parts should also be included in the holes tight. Scroll sections Sand.
Step 3. . From the sheet plywood cut out a small bar. In length, it should be slightly smaller than the width of the lid, in width - to make 5 - 7 cm. It should be screwed to the bottom side of the cover between the two holes. This simple reception will create a barrier on the path of the air flow, forcing it to descend to the bottom of the refrigerator box.
Step 4. . Insert the fan into the hole, make sure that the wires are not shifted and the air flow is directed into the box.
Step 5. . Fasten the knee and adapter in the second hole. It is not worth glue to the glue that the direction of the cold air flow can be set independently.
Step 6. . Connect the fan to the power cord and insert it into the cigarette lighter. Put ice in the container. Car air conditioning is ready!
