Such a building material, such as plasterboard, is becoming increasingly popular, it is environmentally friendly, does not burn, well kept moisture and does not release toxic substances. And with the help of such sheets, the walls and the ceiling can quickly fade, while not necessarily own any special construction skills.
Suspended ceilings are used to create a unique, exquisite design of the room.
Perhaps the only complexity is the installation of a frame for plasterboard sheets.
However, under the clue and this task will be quite satisfied. Below is talking about how to put sheets from such a material on the ceiling.
What will need tools for working with plasterboard
In order to attach such building material to the ceiling, the following tools will be needed:- Electric tools: electric drill, screwdriver, perforator;
- Hand tools: roulette, scissors, knife, hammer, level;
- Related tools: Right board, square, level, flower.
How to put plasterboard sheets on the ceiling with a metal frame
Screw the screws in such a way that the head is drowning in a sheet.
Laying plasterboard on the ceiling need correctly - the durability and reliability of the structure largely depends on this. When installing the ceiling on a metal frame, special screws should be used, and it is necessary to choose them from the thickness of the stacked sheets, for example, if their thickness is 9 mm, then they are strengthened using 1,5-cm long samples. If such a material is already, then the length Self-tapping screws should be less. Screw the screws need a screwdriver at a distance of 15 cm from each other, and this should be done so that the head was drowning in a sheet. Then, when the ceiling is sweeping, the deepening in the place where the screws are screwed, aligned and the entire ceiling becomes perfectly smooth.
Article on the topic: Where to throw out the construction trash?
When the ceilings are put, when mounting the frame, metal profiles need to be strengthened every 40 cm, which is how it will be right. That is, lay a sheet of standard length in 1 m 20 cm, which "sewn" to four profiles. Before mounting the metal frame, you must apply the corresponding markup on the ceiling. In order for the properties of the metal frame to be more noise absorbing, they can be attached to the sealing tape. Well, the plasterboard itself is attached to the ceiling with self-tapping screws.
Before putting GLK, they must be treated with a planer. Thus, the docking is much facilitated. Docking in door and window openings are better not to do, otherwise cracks may form in the joints of the joints.
How to put plasterboard on the ceiling of wooden frame
When laying drywall, a gypsum mastic is used, which includes bone glue and building gypsum.
You can put such a material on a wooden frame ceiling (wooden rails are used for this). If we put the material on such a frame, then some flaws of the ceiling can be hidden, while the height of the room is not very affected. When we put GLC on a wooden frame, it is important to design it correctly and calculate: the success of further work depends on this. At the same time, it should be borne in mind that in those places where the joints will be, the rail width should be at least 8 cm. The rails should be signed to the base of nails, which should be long for at least 10 cm. Material itself must be attached to a wooden frame to the same principle. , as well as a metal frame, with the help of screws.
Between the joints, it is necessary to leave a distance of about 5 mm, then they can quickly close with a putty, the clutch of the solution will be better. When they put such a building material on the ceiling, use gypsum mastic, which includes bone glue and building gypsum. It is attached perfectly not only to the cardboard, but also to other grounds. Before laying such a material, you need to apply the mixture first on the edges of the sheet, and then apply it in the center using small portions. It should be applied at a distance of about 40 cm.
Article on the topic: How to remove enamel with a bath?
How to put plasterboard without frame
Sheets made of plasterboard material can be placed without a frame, it uses a glue or a gypsum solution, which is just for this purpose. Such a method of laying sheets is used when installing dry plaster, while you need to consider the following. The volume of the adhesive solution must be accurately designed, and it is necessary to apply it onto the sheets in such a quantity that the instruction that is written on a pack) will help in this quantity. After the binding solution is applied, you can install the GLC to the place of the mount, then the laid sheet need to be fired, using a vertically vertically, and then it must be tightly pressing the ceiling for 10 minutes.If the GLK is put on the base from concrete, then it is correct to first be primed up using it, using mastic for better clutch. So that the procedure for fastening a sheet from such a material was easier and convenient, it is recommended to cut it into two parts. The fact is that what the sheets are easier, the better they are attached.
For ceiling works, it is best to use drywall panels that allow you to make any ceiling, standard, suspended and multi-level. It is noteworthy that with the help of such a material, you can make a variety of decorative interior details. It is largely valuable due to the fact that it can be bent as you like, and give it all sorts of forms.
How to cut drywall
Before correctly laying such a building material, like plasterboard, it is necessary to start it correctly. To do this, we need to mark the markup, then the drawing with a bar and a pencil. Thus, a smooth line appears, which repeats the contour of the ceiling. Then, using hacksaw with small teeth, you should proceed to cutting sheet. At the same time, the cutting should be carried out slowly and very neatly, not retreating from the applied line. If after that the material is predicted tight to the ceiling, then, it means everything is done correctly. If there are some flaws, then you just need to repeat measurements. Such an instruction will help everything quickly and efficiently.
Article on the topic: Facades of private houses - Modern ideas for design (100 photos)