In the spring period, any owner tries to enjoy and decorate their plot. It may be the courtyard of the Big House, the country area or the playground. Creative ideas and unusual structures every year more and more surprise us. Skillful masters are creating beauty from any materials and things. Surely everyone familiar with the clubs and fences from tires from childhood. Without limiting your fantasy, skillful masters offer many options for crafts from automotive tires.
Necessary materials for crafts from tires
Crafts from tires can easily decorate and refresh any site. Unusual scenery will delight the eye, and also will not leave any child indifferent. Such crafts can be practical and decorative.
If old tires have been lying on, then spring is just the right moment in order to put them in business. At the preparatory stage, consider all the details at the preparatory and make a list of what you may need during work - this will significantly save time in the future. You will definitely use:
- tires (in the amount of how much it will be needed for the embodied idea);
- a knife that will rive tires well;
- paints for outdoor work;
- Tassels;
- screws;
- screwdriver;
- plywood;
- shovel.
This list is complement to your request, because your fantasy is not limited.
Practical country crafts from automotive tires
Country plot as it can not better displays the face of his owner. It is in the country that a person is creating an unforgettable and unique area of relaxation. Not always and not everyone has a financial opportunity to purchase finished products for giving. Also, everyone has a desire to do this when it is possible to try yourself in a new form of creativity.
Puffy from tires
For this product, you will need: tire, hemp or jute rope, two circles of plywood, self-tapping screws, varnish, glue. As well as a set of tools: drill, scissors, brush.
- Circles from plywood in diameter should coincide with a tire;
- Circles from plywood put on a tire and make a hole drill;
- In the created holes, screw the screws, thereby fixing the panel on the tire;
- We do it on both sides;
- Next, we decorate the workpiece, it will take a rope and glue. We start sticking the rope from the center of plywood. We glue the rope in a circle, gradually punishing the plywood, the tire, and then, reaching the second side of the plywood, the rope is cut and glued. The second side of the plywood is beginning to glue too from the center;
- Since the pouf will be used outdoors, it should be protected. In this will help the rush of varnish;
- When the varnish is dry, the pouf will be ready for use.
Article on the topic: Summer heating system
Flowers from auto stakes
If your acquaintance with tire products just begun, it is better to prefer simple options. For example, you can make a small flower flower leaf:
- Take 4 tires;
- 3 of them cut in half (to get half). Cutting such a material is better than a shoe knife or an electric bison;
- All tires are paint. For this suitable brush or spray. Color Choose such that will be combined with future plants in the flower bed;
- Tire halves to put in the form of petals, fill in the prepared soil;
- Place a whole tire in the middle of the flower and also fill in the soil.
Another simple vehicle flower beds - Pyramidal Flowerba:
- Take 5 tires (if desired, you can and more);
- Color all tires in the desired color;
- In two tires, attach a round sheet of plywood on one side, organizing the bottom. Make several holes in this day;
- Place 3 tires in a row and fill in the soil,
- At the intersections of the tires, set the top of 2 tires with the bottom and also pour into the soil.
Flowerbed can be suspended:
- Think over what will be the bottom of your flower beds. It may be the bottom of the plywood sheet, the rubber bottom, or you can do without it, if you install Kashpo's tires itself;
- Fasten a solid metal chain on the tire (a rope or thick cord is also suitable);
- Paint the tire in the selected color;
- When it finally dies, install a pre-prepared place in advance.
Country tracks
Another option for using tires in the country area is to create a track of them. If you have always thought about the need to build a track and postponed this case in view of the laboriousness or financial costs, then this is your option:
- With a sharp knife, divide the tire tire from the sidewall. To facilitate this task, do not forget to periodically lubricate the knife with soap solution, and be extremely neat;
- The resulting element of the treadmill from the tire must also be cut, so that it turned out a peculiar rubber tape;
- Such work should be done with the number of tires that you need to create a track;
- The width of the track is determined by the owner independently, but usually it is 3-4 tires in width;
- Plot for a track must be align: remove the top layer of the Earth, and put a small gravel or a thin layer of concrete in its place. After that, you can spread the rubber tracks;
- Another option of laying a rubber track: to kill rubber blanks with nails to the boards, lay the boards as a track.
Article on the topic: Bathroom stickers - how to choose and paste
The ladder path is one of the options for country tires:
- You will need whole tires;
- Tires lay out on the ground, starting from the lower level;
- laying out tires, deepen them a little in the ground;
- Put the filler inside the tires. For this, natural soil is suitable;
- To prevent slipping into wet weather, suck the finished ladder gravel.
Plaster pool
A small reservoir on its plot can be made without special financial costs, you can use automotive tires. For a small decorative reservoir, tires of any size are suitable, but if you want to make a kind of pool in which you can plunge, it is better to use tractor tires.
- Prepare the main material: cement bag, sand;
- Choose a plot where the pool will be located. Clean it, remove the top layer of the earth to clay. Fill with a sandy "pillow" from above, and then cement. To do this, you will need about two buckets of cement, its layer must be at least 20 cm;
- The top of the tire is cut off with a knife to the tread, leaving a small kant;
- below also cut off some rubber, so that the bottom was smooth;
- To avoid the flow of the pool when the rubber is shifted, it is filled with a molten tar;
- After that, put on the bottom of the film (this can be purchased in construction stores) and gently fill the pool with water;
- Next, give the outer part of the basin aesthetic appearance. You can use anything: brickwork, decorative plaster, painting.
Decorative decorations of a plot of tires
Decor elements for your cottage area can be made with your own hands using old car tires for this. Unusual figures, fabulous heroes, swing, sandboxes - all this will be the highlight of your yard and the favorite place of children.Swing made of tires
- Prepare the necessary materials: Durable branch, acute knife and jigsaw, chain or durable rope, tire;
- Tie the end of the rope in the loop, making knots durable;
- Put in the branch through the branch, pass through it the rest of the rope and tighten;
- Put the tire perpendicular to the ground;
- Through the tire skip the rope and attach at an altitude of 80-90 cm from the ground.
Article on the topic: Baby swing do it yourself: schemes and assembly
Sandbox
Sandbox from one (big) tire:
- Prepare the selected area, hide a small recess - in diameter it should not be larger than the diameter of the tire;
- the top of the tire do trust so that it is free;
- Edged edges need to be processed, it is better to do with a cut rubber hose;
- After that, paint the sandbox to your taste;
- After drying, the paint can be installed and fall asleep with its sand;
- An additional element of such a sandbox can be an umbrella or a visor in the center of the sandbox to create a shade.
Garden figures
The palm tree from the tire will be the original and fresh decoration of your site:
- Melt the tire, cutting it with a sharp knife or jigsaw;
- Then, on the prepared rubber, draw a contrast pencil outlines of palm branches;
- Next, cut down the palm branches from rubber;
- Color in green;
- Finished leaves, attach with nails to the stems of trees from the nails.
Swan:
- We start working with the markup of the tire;
- From the middle of the tire we plan neck, from the sidewall - wings;
- Cut the wings and neck so that the lower part of the tire remained the whole;
- Carved pieces of neck and wings flex and give them the desired appearance. For this you can use metal bars;
- Cray to the finished product in the colors of the swan.
Sun:
- On both sides of the tires you feed the carved plywood circles;
- We are preparing a plot for installation, tear a small deepening, the third part of the tire height should be logged;
- We install the tire in the recess and cheer;
- Mobile tire in yellow, the original will draw on the face of the sun, mouth, nose;
- When the tire is dry, proceed to setting the rays. As rays, any plastic bottles can be used - they are glued across the rim;
- After that, paints the rays of yellow paint.
It is important to observe a few simple rules when working with tires:
- accuracy when working with knife and sharp tools;
- To apply paint on pure tires, pre-skilled;
- let's dry the paint;
- Foreign tires have more subtle rubber, so it will work easier with them.
Options for landscape design with tires There is an incredible amount, however, the main source is your fantasy. Perhaps now you have not so much ideas, but during the course of creativity they will definitely appear.