Ceiling Ceiling is worried about the second birth. If you turn to the experience of the past, it appeared with us relatively recently.
At the beginning of the nineties, the cutting ceiling design seemed to be something unprecedented. In return, aluminum rails came, who were quite expensive and were a sign of prosperity.
The first to use the rack ceiling became office owners. Literally every serious organization sought to choose exactly such a ceiling finish, in order to show their respectable customers.
Because of the high cost of overseas material, not everyone could afford to afford a fashionable ceiling. A little later, when and in Russia learned to make materials for the ceiling, from office premises, racks suspended structures moved to ordinary apartments.
And here the owners seeking to make a new repairs stood before a difficult question. In fact, the ceiling of aluminum rails is not suitable in every room. Say, simple living room design
The rigor and dryness of such a ceiling will not be patient.
And the wave coating was found new application. It was mounted in the bathroom or bathroom and in the kitchen. This solution was facilitated by the properties of such a design, including:
- Resistance to the effects of steam and water, which is sufficient in the above-mentioned rooms. Unlike whitening or painting, the ceiling from the rivers is not deformed and does not lose its attractiveness;
- Easy installation. Warm Ceiling Ceiling is able to mount any adult man familiar with repair work;
- Street design. The snow-white ceiling from the RECEK looks quite modern, if desired, it will become a relevant emphasis in the design of the room.
With the help of the cutting ceiling, you can visually align the ceiling. As a rule, the ceilings and walls in old apartments are not different, and due to the suspended design, you can greatly align them.
Ecology and simplicity of care makes such ceilings in the kitchen, where pairs and hot fat very quickly lead to other coatings.
Article on the topic: Doorway height: dimensions, width, thickness
As already mentioned, the installation of the ceiling from aluminum rails will not be difficult. You can experience yourself as a builder and try to fulfill such work with your own hands.
Aluminum Wheel Ceiling With Your Hands
It was mentioned above that the design of the cutting ceiling is suspended. So, the slats on the suspension are attached, at some distance from the ceiling.
It is important to remember that each manufacturer has in its assortment racks and traverses (mechanisms for hanging) of a certain size. That is, if you acquire traverse and rails in different companies, it is possible that as a result, there will be large gaps on the finished ceiling.
To avoid this, try to buy all the materials from one manufacturer. For installation, you may also need a stepladder to buy in any economic store or on the site zsonline.ru. By the way, such a utility device, as a stepladder, is a very important role in normal operation.
It is important to choose it in such a way that all the legs confidently stood on the floor, otherwise the stepladder will be fused, and you can easily fall. In addition, the good stepladder should be high enough to do not reach the ceiling.
Also for work, in addition to the material itself, you will need:
- building level;
- roulette;
- drill;
- Scissors for metal;
- screwdriver.
The seat mount itself includes, actually, panels, guiding profile, tires, suspensions, dowels and screws.
Work begins with the installation of the guide profile around the perimeter of the room. To do this, you need to measure the distance and mark the pencil or construction rope.
Typically, the guide profile is sold three meters long. If this length does not fit, the profile is easy to trim. It is fixed with the help of dowels throughout the perimeter of the room, with a fastening step about a meter.
Now the scene turn came. They are also attached approximately at a meter distance from each other, with the help of dowels.
Article on the topic: Heating coolant: species, advantages and disadvantages
Universal tires, or traverts are attached to the suspensions. The appearance of the ceiling depends largely on how exactly you mounted the traverses. Note that it is necessary to do this at one height with the initial perimeter.
Traverts are mounted perpendicular to the suspensions. They can be abandoned if the initial length is insufficient and the place remains until the end of the ceiling.
Now you can directly proceed to the installation of the ceiling. Calculate the required amount of material to work. Construction online calculators will help you where you need to know only the perimeter of the room in need of repair.
Rakes are neatly inserted into guide traverses. Note that it is necessary to do it throughout the length of the room. Slices will not do it - the finished result will be unattractive.
Cut the rail must be taken into account the allowances for the backup. Package Leave about five millimeters so that the strip is convenient to insert into the groove.
The finished ceiling must be smooth, without lumen between the rails. If you are planning point lighting, it is better to install the lamps in advance, and over top of them to apply cladding.
By the way, before starting work, keep in mind that the ceiling of aluminum regions is the final stage of repair. That is, they put the ceiling after the tile is laid on the walls, or the wallpaper is pissed, the premises are made.
If you have any questions, go to our construction forum and ask them there. Our experts will help you repair without loss.