The transverse knitting needles scored incredible popularity in our time. In the article, we learn how to make knitting needles in the transverse technique.
Cross knitting needles it is possible to create original, beautiful things for both children and women.
Original vest
Such a knitting technique you can get an interesting vest:
We need BOUTON D'OR: 8 / 9/10/12 / 11/12 SURYA (55% of bamboo viscose fiber, 45% of soybean fibers, 156 m / 50 g) gray-green (005); Spokes number 3 and No. 3.5; Additional needles.
Make 4 facial loops, crossed left: remove two hinges for add. The needle placed in the front, the next two hinges in the face, then two loops with add. Spokes of persons.
8 facial hinges, crossed left: remove four loops for add. The needle, placed in the front, the following four loops in the face, then 4 loops with add. Spokes of persons.
8 facial loops, crossed to right: remove four loops. on add. The needle, placed in the back, the next four loops in the face., Next 4 loops with add. Spokes of persons.
Need screws No. 3.5: 34 p. And 37 p. = 10 x 10 cm.
Back. We recruit 90/95/98/102/109 Peltlets on the spokes number 3 and knit a rubber band 1/1. At a height of 3 cm knit one row. izn. Peltlek by Izn. Side on the spokes number 3.5, evenly adding 32 loops. It turns out 122/126/130/134/141 p. Then knit according to the scheme, making an increase on the left of 15 × 1 loops in each second row. We get 137/141/145/149/156 loops. At an altitude of 21.5 / 23 / 24.5 / 26/29 cm, we close on the right side for the cutting of the neck 2 loops, then we close in each second row of 3 x 1 p., In each fourth row 2 x 1 p. It remains 130 / 135/138/142/149 loops. Tie 138 rows according to the scheme, then continue to knit the mirror.
Article on the topic: Coffee beans and beans painting: Master class with photos and video
Before. Knit similarly to the back, except for the neck. At an altitude of 21.5 / 23 / 24.5 / 26/29 cm, we close on the left side for the neckline of 6 loops on the left side, then we close in each second row of 4 x 2 p., 7 x 1 p. It remains 116/121 / 124 / 128/135 loops.
Assembly. Below the backs are gaining 137 / 147/157 / 167/185 Peel on the knitting needles No. 3 and knit a rubber band 1/1. At an altitude of 15 cm, we close the loops, they see them in the drawing. We perform the bar as below. Perform 1 shoulder sink. As a neckline, we recruit 156 kettles on the knitting needles No. 3 and knit a rubber band 1/1. At an altitude of 1.5 cm we close the loop. We perform the second shoulder seam, sew the sides and sleeves.
You can also connect an excellent coat. Here is a knitting scheme:
Pullover transverse viscosity
For the pullover for women you will need:
- Polkilogram of thick yarn;
- Spokes number 4;
- Circular spokes number 3.
Basic pattern: "Polish gum": (the amount of looping, multiple 4 + 3 p.).
1 row: 3 persons. Loops, 1 is elegant. loops, 3 persons. loops; 2 row: 1 persons. loop, 1 is elegant. p., 3 persons. Loops, 1 is elegant. p., 1 persons. P.
Mattle density: 20.8 p. X 35 p. = 10 x 10 cm.
Pattern:
Knitting perform from the start of the sleeve.
We recruit 37 kettles and knit the main pattern. For the bevels, we add from two sides of 1 loops in each fourth row 20 times (= 77 p.), In each second row 10 times (= 97 p.).
At an altitude of 54 cm at once from two sides, we recruit 34 loops (= 165 p.) And we introduce new loops into the pattern. Then knit on all loops 11 cm, after which we divide work: for the back, we leave 81 loops, 7 loops close for the neckline, for the transfer - 77 p.
In front of the back, we knit separately 26 cm, then we recruit 7 kettles between them and we all withclude 11 cm. After that we reduce the number of loops from two sides in the reverse order: we close 34 of the looping, for the bevels we reflect 1 looping in each second row 10 Once, every fourth row is 20 times. At an altitude of 156 cm from the beginning, we close all the loops (= 37 p.).
Article on the topic: Round coquette crochet: master class with schemes for children's dress
Assembly. On the edge of the neck of the neck, we recruit 68 loops and knit five cm by the base pattern, but in the even rows of pattern loops, on the contrary: instead of the facial - the wrong, instead of the wrong - facial, five rows of facial glades, close the loops. We sew the sides and sleeves.
Bini hat
Detailed instructions for knitting cap knitting needles can be seen below.
First, knit the main element of the head remove - Tula, in the transverse direction. Further, on the long side of the main element, we recruit the loops and link the bottom, making the tip to the top of the hats. At the end of the loop, the remaining on the top, they are tightened and stitch the hat on the back of the head.
In order for the seam from behind the caps, it is necessary to sew open loops of the main element of the "knitted" seam, connecting the dissipated first row and not closed the cavities of the extreme. The first glad to dissolve the loops will not be difficult if at the beginning to make a set using a crochet that is easily dismissed.
We recruit forty kettops and knit the bulk of the cap with a long strip with a pattern of "braid" in the middle. Initial and extreme loops - edge, form them with a "chain".
From the edge, the initial and last seven kettops knit tight knuckles (these loops knit facial and in the wrong and in the face rows).
Subsequent eleven rows knit facial stroke and in the 25th facial row we intersect 16 loops from the second part of the central element of the hat. To do this, we have the initial 8 penethets facial, the next 8 loops remove on an extra needle and we have them before work, we have the last eight kettops facial, then loops with extra needles.
We repeat the design of the weave from the second to the 25th row five times, then insert the 12 rows of the facial stroy. The finished major part of the cap in length should be equal to the scalp. At the end of the loop, do not close, renote them to an extra needle.
Article on the topic: Pictures of fabric do it yourself on the wall: Schemes and master class with photos
Knit donyshko headdress. At the top of the finished element, we recruit the loops, pulling out of the hinge edge to the working knob. The loops are recruited from the front side so that the row of edge loops is on the wrong side.
Loops scored with knit rubber band 1 facial x 1 Pour, 11 rows. In 12 row, they see all the loops of two together, collecting together two facial and together two wrong. Then knit a rubber band 1 × 1 more four rows, we reduce all the loops twice. Cut the working thread after the twice of two more rows. Do not forget to leave a length of good length. We take a needle with a wide ear, insert and stretch the tip of the thread through the remaining loops and tighten them.
Stitching a hat. It remains only to sew a bottom and the main part of the header. Dysheko sew the needle for the edge loops along the invalid side, and the main part stroke, the blur of the first row loops and the unclosed loops of the extreme row on the face side in the technique of "knitted seam".
Video on the topic
Examine the topic More You can, watching the video: