Spring came, and the birds are enliven and begin twitter, bringing live breathing to your garden. To attract birds to your site, you need to make the manufacture of feeders. This is one of the simplest and most useful classes in the country area to which you can attract the whole family and have a pleasant time.
To date, there are a lot of types of feeders. They differ material that is used for their manufacture. Already long ago were the times when they were only made of wood.
Now you can make a "gift" by birds from cardboard, plastic bottle, unnecessary box and even milk package.
In this article, we will tell you how to make a bird house for feeding, without applying to this special effort.
How to make a plastic bottle feeder?
You need a clean and empty plastic bottle (1.5-2 liters) with a lid, two spoons of wood, manicure scissors, durable wire or thread hook, rope to hang the feeder,
On the bottle felt-tip pen, mark the places where the porchos will be inserted. On the marks cut the neat openings. The slots must be made in such a way that the spoons on the one hand are fixed very firmly, and on the other it could be filled with food. When the holes are ready, impose spoons in them. In the lid, secure the wire or hook with a rope and pour into the bottle feed.
Hanging finished feeder on the tree. In a bottle, you can stick a few spedes that you can drive favorite delicacies for birds - fat or dried fruits.
You can also take an empty plastic eggmarket and cut two holes in it on the sides, and pour food to bottom. To attract to such a trough of birds, you can decorate it with plastic flowers painted with multi-colored paints.
Article on the topic: Anti-Vibrating Washing Mat
Cardboard trough
To make such a trough you need an empty cardboard box or a box of milk. In front of the box, cut a small hole in the stationery knife so that the bird can get there. At the bottom of the box, cut a small hole for the petition, and secure in it a small wooden bar or a dense cardboard.
Remember that such a feeder should be stable. To attract the attention of birds to it, feeding holes will cross off color cardboard or simply cleaned with colored markers.
Old boxes from under the candy will also come across the way. Take two boxes - one small one more than two times more. From a little you need a bottom, and from the big - the cover. Cover from a large box bend in half, making pre-small cuts on the sides. Then glue its edges to the carton. Fit feeder on a tree with a splitting of twine.
Cup as a feeder
Very original looks from a cup and saucer. For its manufacture, take a tea cup, saucer, spoon, sandpaper, glue and a cut of a copper pipe. The bottom of the cup and the inner surface of the saucer thoroughly wipe the sandpaper, for better fastening them among themselves. Glue to spread the bottom of the cup and stick it to the saucer. When gluing the cup, it is even necessary to push evenly so that the bonding has passed successfully.
Stock Foto Original bird feeders from cup
A spoon, which will lie on your feeder, also thoroughly wipe the sandpaper and take it to a saucer with glue. Give the entire design to dry several hours. Then stick to the bottom of the cup copper (can be wooden) tube. Such a feeder can be installed in the garden or garden. Just do not forget to pour clean water into the cup, and in the saucer pour feed.
Article on the topic: Santa Claus and Snow Maiden with their own hands
Cutter from old vinyl records
For its manufacture, take two old plates, two wooden sticks, a plastic bottle (2l), an artificial rope or wire, as well as hot glue.
Attach the cover from the bottle to the middle of the plate and circle it with the marker - it will be a markup for the hole. Put the plate on top of the small saucepan and put in the oven preheated to the limit, just a few minutes. Then get and create a certain bowl. Just do not forget to put on gloves. While the plate is hot, make a hole on the outlined circuits. The edges of the opening must be gently bent inside. Put your bowl on a bottle as a canopy.
Similarly, make a bowl for the feeder. Only the hole cut no longer needed. Stick both plates to the bottle with hot glue. In the bottom of the bottle, make small holes so that the feed is emptied free to the plate. Now, with the help of a drill and peaks, make small holes in the plates to consolidate the ropes in them. Push up in a bottle feed and you can hang it in the garden. To attract birds you can decorate the feeder with bright colors.
To make a beautiful and original feeder with your own hands, you do not need to "invent a bike". Just show imagination and, using brew funds, give the birds joy.
Bonus to the material - look at the video, how easy it is and easy to make a bird feeder from the box from juice or plastic bottle: