Stylish interior decoration does not necessarily have too expensive. We are told about this materials such as, for example, plywood. Arches from plywood - an easy way to make the room more original and refined, while using your own strength and not carry too much costs. Any room will be transformed with the arch, and their cascade, for example, will look very impressive in the corridor.
Learning to make the arches from plywood
What do you need?
How to create an arch do it yourself from plywood, that for this you need and how to make calculations correctly, you can see the video in more detail. Of course, the main material - plywood in sheets. By the way, it is necessary to note sufficient elasticity of the material that allows you to preserve the form.
Beautiful arch.
Let's see what other consumables and tools may need to create a beautiful army with their own hands. But you must first prepare the calculations, it is necessary that everything you need to create a design can be understood.
The calculation begins with measurements. It is usually measured by the opening itself in width, its arch, lighting elements, as well as the "front" of the work regarding the dismantling of old doors, structures, expansion of openings, and so on. Of course, the ideal will be the creation of preliminary drawings. So it will be clear the amount and quality of materials. The drawings are better to do in several angles. If there are skills to work in a special editor, you can construct the arch on a personal computer by entering only format and derivatives.
Selection of tools
For comfortable work, it is necessary to have not only high-quality consumables, but also a tool. So, to work with plywood you will need:
- hacksaw;
- Lobzik (electric);
- screwdriver (or drill with similar function);
- roulette;
- level;
- construction knife;
Materials will be the following:
- fasteners (dowels, selflessness);
- Plywood sheets (thickness should not be less than 4-5 mm);
- mounting foam;
- The materials of the finish finish (it all depends on the further appearance: it may be wallpaper, putty, paint).
Article on the topic: How to cover brick on the balcony is best?
Stages of work
The first we described. It is necessary to make drawings and pre-purchase of material, as well as prepare the area for further processing (dismantling, for example). Also worth separately say about safety technician. It is best to prepare gloves and building glasses. Sheets will be attached from above, so it is very important to protect your eyes.
The next will be the fastening of an aluminum or wooden profile, depending on the drawing and type of structure. Initially, the workpiece is fixed using self-press. First of all, the side parts must be performed and only then the arch. In order to get a smooth semicircle, it is necessary to build a profile correctly. To do this, it is best to make small parts of the design in a step of 5-10 cm around the circle, after which it is already starting to fasten the plywood sheets.
You can drink with a jigsaw, the desired design or, if it allows the size, just secure sheets, slightly flexing them. After coping them together on the junction. To do this, you can use a thin flexible bar from the same plywood. Sheets are attached to the online approach so that the unnecessary protrusion does not turn out. The resulting emptiness between the opening is better to fill in the mounting foam. It will strengthen the design.
Finish
Almost final, but not the final stage will be finishing. To close the seams, it is better to purchase a special putty, which will approach the composition and properties. If further surface color is assumed, the hats of self-tapping screws are preferably stuck - it will be more organically. After putty, the surface must be carefully sanding sandpaper with small grains (this is the case with staining), after which it is also important to remember the soil. Thanks to the good primer on a tree, you can eventually obtain a uniform coating that will last long. Also a good advice will be the use of a painting mesh or glass cholester. They will help paint to lie down more evenly.
Article on the topic: Wallpapers for painting in children's
It is also possible to arrange additional elements under the arches. It can be a decorative detail or lighting. By the way, it should be calculated at the stage of the drawing, if the lamp is assumed in the arch.
In conclusion: The most important thing when working with your own hands is attentiveness. You can first take a look at the photo or video materials to determine the type of arch and work.