With recently, the units of the suspended type is no longer an expensive elite plumbing device. He moved to the class available for everyone. And this is right, because the design of console unitasis takes not many space and does not create problems while cleaning the room. The main difference of suspended toilets is their installation system of installation, which is a rigid frame that holds the drain tank and the mechanisms for the operation of the toilet. Only a wall porcelain bowl can be seen.
Suspended toilet saves space and facilitates cleaning in the bathroom.
Installation of the suspended toilet with your own hands is a rather complex technical process. It is much more difficult to install than the installation of the floor toilet, since, in addition to the hidden installation, a niche device is needed in compliance with some nuances that will be considered below.
Advantages of suspended toilets:
- Such models fit perfectly into the room, not a port of the appearance of the bathroom or toilet in the case of a separate location of the bathrooms. Excellent coping with their direct responsibilities, suspended toilets will add modernity to the appearance of the bathroom.
- Pendant toilet bowls have a rather strong design and are capable of withstanding loads up to 0.4 tons. People suffering from excess weight can install and exploit suspension plumbing models.
- The developers of such toilet bowls take into account many trifles, and the geometry of the bowl allows you to conveniently and comfortably operate the toilet.
- Built-in water dividers, helping the water flow to move with a greater speed, guarantee excellent rings of the bowl throughout its area.
- Installation of built-in installation and mounted bowl will help increase the hygiene of the room and facilitates further care of the tile.
Note
It is believed that the installation of the toilet bowl increases the free space of the room, but this is not entirely so, because the placement of installation requires an additional place.
Build a toilet, installation of installation and a bowl with their own hands implies the presence of the following tools:
Mounting scheme: 1 - rods for mounting, 2 - monolithic concrete base, 3 - plastic drain coupling.
- Perforator;
- Special drills on concrete corresponding to the diameter of fasteners;
- construction level;
- marker or pencil;
- roulette;
- Caid and horn keys;
- Adjustable wrench;
- Screwdrivers flat and cross;
- a hammer;
- Bulgarian;
- Sealant on silicone basis.
Article on the topic: How to shut down the slopes on the windows
Installation and its installation
As already mentioned, to install the toilet, with their own hands, you need a niche. It is from her that all work begins. The location of the niche should be selected taking into account the possibility of a hidden liner of the sewage pipes Ø110 mm. It usually causes the greatest difficulties. If the saving of space is not in the first place and there is an opportunity to sacrifice the space of 15.0 x 70.0 cm, then a drywall box can be used to install a niche for installation.
Installation scheme.
After determining the installation site, the carrier structure is started, which includes a hidden tank. The frame is installed primarily, and only the sewer pipes are supplied to the finished installation.
As a rule, there are 4 reference points on the frame (2 legs that are attached to the floor, and 2 brackets that are fixed to the wall).
Fixing installation start with legs. After they are fixed, the frame is adjusted in height using 2 bolts for this on both sides of the frame. The drain hole should be at a distance of 25.0-30.0 cm from the floor level.
Deciding with a height, installation of installation is completed by fastening brackets that are fixed to the wall with anchor bolts or powerful self-draws.
During the fastening of the frame using a construction level, it is necessary to continuously control over all planes.
Compounding installation with water and sewer systems
Connecting a hidden tank to the water supply must be carried out extremely gently, otherwise the subsequent leaks during operation will not be eliminated without disrupting the integrity of the walls. To do this, it is better to use copper or polypropylene tubes. To seal the threads, it is better to use the pass and paint. It is unacceptable to use flexible hoses, you can only afford the threaded compounds of the American type.Connection to sewage is simpler, using conventional sewage and sealing paste pipes. At the same time, one should not forget about the slots and turns, the installation of which must be carried out only with the help of taps at an angle of 45˚.
Article on the topic: Stylish house for cats and dogs
All mounted and connected installation elements must be necessarily tested. And only making sure that all devices are lacking and stable operation, you can begin with plasterboard trim. Before starting work on the trim, it is necessary to install the unitasal connection nozzles (large and small), the attachment studs and the square for mounting the drain button.
All subsequent works related to the installation of the suspended toilet with their own hands are made after the completion of facing works.
Installing bowls toilet bowl
There are several nuances that must be taken into account when installing a bowl-type toilet bowl:
The layout of the bowl of the toilet bowl.
- Careful fit of the nozzles that connect the toilet and installation. This work seems simple at first glance, but it is necessary to approach it with full responsibility. It is important to determine their length. Too long nozzle will not allow the toilet to nourished tightly to the wall. If the short is cut off, the leaks may appear during operation.
- Between the toilet and the wall during the attachment of the bowl to the studs, it is necessary to put the gasket from rubber, otherwise the tile or the toilet itself may be damaged. If for some reason a rubber gasket that is included in the package suddenly disappeared somewhere, then a silicone sealant can be used. It is applied to the part of the bowl in contact with the wall and are waiting until complete drying. Such a gasket does not bear the sealing functions in this case, but only is a kind of shock absorber.
- The question of direct fastening. Nuts must be tightened with hard and at the same time with extreme caution. No need to forget to use all plastic and rubber gaskets, which are included, otherwise porcelain can burst.
Setting the drain button
Suspended toileties can have the drain buttons of the following types:
Before serving, open the water supply faucet to the tank, because After installation, you can not get to it.
- mechanical;
- Pneumatic.
Article on the topic: Modernly looks like floral wallpapers in the interior?
Choosing a toilet, it is better to give preference to pneumatic. Mounting them is much easier, and their service life is much more.
Before installing the drain button, it is necessary to trim along the tile level of the rectangular frame for access to the internal elements of the tank. Also in advance it is necessary to open the feed valve to the tank for draining the cold water. Usually it is directly in the tank, and after completing the installation work, it will be easy to get to it.
Having done all these simple manipulations, you can start connecting and installing the button to the place. Connect it with your own hands will not be much difficulty. For a mechanical type button, it is only required to be adjusted in the appropriate direction of the pins of plastic, adjusting their length. Pneumatics connects even easier. No adjustments to produce. It is enough to connect two tubes with the push-button block. The first one is responsible for the small drain, and the second is for the big one. The connected button is inserted into a special hole and snap.
That's all the stages of the process of installing the toilet toilet type with their own hands. And it's just or not, everyone decides for himself. But if there are hands and a specific goal, then, having learned from all kinds of sources the necessary information, this process will become quite interesting and informative.
Previously, mounted units were made only in elite houses and were considered luxury. But over time, due to the increase in proposals for this equipment, its cost has significantly decreased and now the suspension toilet can afford everyone. It is clear that the suspension toilets are more expensive outdoor, but more and more people today give them preference when replacing obsolete plumbing. Of course, the installation with your own hands significantly reduces costs, and if there is confidence that the task will be qualitatively performed, then you can safely begin to work. But if it is clear that it is not necessary to do without any assistance, it is better to contact a proven reliable company.