How to make flowers from corrugation (60 photos)

Decor of the house - the work is constant and not stopped. The process is mastered by new techniques and types of work. In this article we will talk about how to make flowers from corrugated paper. This paper can be found in flower stores. But in a larger assortment it is in specialized establishments that sell everything for needlework. A wire or thin sticks will be needed for work (bamboo ships are suitable), glue and scissors.

General principles and rules

Despite the fact that the colors from corrugated paper make different, the principles of work are the same. Here are briefly general rules that will help make paper flowers with your own hands, very similar to real.

Cut several petals of one size at once. To do this, fold the paper in several layers.
Petals usually make different sizes. Roses, for example, at least four different, daisies - 2-3. In general, you can adhere to the rule - the more petals in the flower, the more different sizes.
Adorable Corrugated Paper Flowers Can Decorate Your Interior or Become a Gift
Do not try to make petals and leaves perfectly even or completely the same. In nature, they are different, unique. It should also work out.
After winding the petals on the stem, well by fingers turning into the turning part, twisting the paper around the rod. The more denser you will press, the more tightly the petals of one to another will be adjacent. Adjusting this effort, from absolutely identical petals can be obtained different in size and appearance of flowers.
Each twisted petal stem scatter in the glue again.

Here, in fact, all the rules. And also: the first stem is preparing. For it, a wire or chopsticks of different thicknesses are used, which turns around with a long thin strip of corrugated paper of green. Ribbon can be labeled with glue, and then wind on the base. You can spin dry, and the edge fasten the liner's drop. Another point: if you are going to collect the composition, the bottom 1/3 of the stem is left without finishing - it will be easier to make a bouquet.

Macs

Macs from corrugated paper do very simple. It is important to find the desired shade of scarlet. It also takes a small piece of black - for the core. But, if it is not, you can use any dark, painting it later into black.

Mac corrugated paper do this:

From paper napkins of any color we put a small square. It is wrapped with black corrugated paper. If there is no black - you take any dark, then paint.

Making core
Cut from scarlet paper for two or three petals of different sizes: small, medium and large.
Collect the petals all together (do not fold into a neat stack) and ferment into the ball.
Disassemble the ball on the petals.

Preparatory work
We take the core, turn around the first small petal around it from left to right.
The second small petal partially overlaps the first, behind it is also overlapping, there is a medium.

Collect flowers from corrugated paper with your own hands
The second middle and two large petals form the second row. They are located so that their central part overlaps the place of the compound of the previous row.

Give the shape and make out the stalk
Having collected everything together, insert the wire into the base, wind the base of the thread, we speak. Wrapping green paper.

Here is such a flower from corrugated

Mac is one of the most simple colors for self-making from corrugated paper. It looks, at the same time, very good. You can use them in campaigns with other colors, or make a bouquet of makov only.

Even such a simple flower can be done in different ways. First of all, you can change the middle. In the above-described master class, the core of the flower is very simple. It can be done more like a natural one. According to the same technology, we make the middle, but of white paper. And from the black (you can paint) cut the band with a width of about 1 cm and a length of 4-5 cm. On the one hand, we cut it into thin strips (a pair of millimeters width). The resulting "noodles" twist, getting thin stamens. The stamens turn around the core, and then act on the same algorithm.

How to make crocuses from paper and candy

An unusual gift can be done using candy as a core of colors. It turns out the original sweet gift. Such core can be made in colors with large hollows inside a bud - tulip or crocus, for example. Moreover, crocuses from corrugated paper do very simple. Everything will take 5-10 minutes. Not more.

How to make flowers from corrugation (60 photos)

Bouquet of corrugated paper with candy - a good surprise

From the paper, cut the square with a side of 15 cm.
We divide it into three parts, making a cut on a depth of 7.5 cm. Three petals are obtained.

First step: cut out the workpiece
Each petal, measuring 5 cm from the top, scroll around its axis and the upper part bend down.
Fingers give them a concave form.

Second step: form petals
We take the generated petals, turn around the stem so that each petal occupies its place - approximately 1/3 of the total diameter. For this, the lower edge will have to be good.

Step 3: Fresh Petals on Stem
Green paper make leaves. Cut the rectangle with the sides of 5 * 8 cm.
We divide it into three parts, making cuts to a depth of 8 cm.
Having retreated from the edge of 3 cm, tighten the paper strip around its axis, the upper part be fed down, we will spread and attach a rounded shape.

Step 4: Make Leafs
Leafs turn around the bud. They must have to the butt butt.

Step 5: Final crocus
We take a narrow strip of green paper, spinning it around the wire, decorated the stem.

That's all, crocus from corrugated paper and candies are ready. Having made 7-9 pieces of such colors, you can put them in the basket. For a larger diversity you can make any small colors.

Chrysanthemum

According to the technology described above, you can make chrysanthemums. The difference is that the petals will be much and they will be narrow. And the principle is the same: tighten the top of the petal, lower down. Only in the case of chrysanthemums it is necessary to give the whole petal to be curved shape.

Make this such chrysanthmant of corrugated paper

Candies are also used for these paper chrysanthemums. These colors from corrugated paper are better to do from not too bright material. Tone more tender, soft. For foliage also chosen muffled greens. For greater truth, take the paper of two close shades and make the petals of two shades.

So, do it yourself with crocheted paper chrysanthrom:

To the bamboo long skeleton we bind the candy (the wire bends), for this you need to take a piece of foil, wrap the candy. You can secure threads or ribbon.

Petals may be the same
Cut the rectangle from the paper. Width 10 centimeters, length - about 20 cm (can and more, there will be a more dense flower).
Cut into a strip of about 1 cm wide. It turns out 18-20 petals.
Each petal twist, resetting from the edge of about 3 cm. We attach the petals curved shape.

Almost done
Spin the strip around the stem. We follow that the petals of the second row occurred to the place of connecting the petals of the first row. Similarly, place the third row and all subsequent ones.
Cut the base with your fingers, spinning around the stem, fix the thread.

Latest strokes - design stem
Take a long thin strip of corrugated paper of green color, turn around the color and "stem" around the base,

This version of chrysanthemum looks good. But for greater truthfulness, it is possible to make petals of different sizes. Need at least three gradations: small, medium and large. They will differ more in length than in width. Look such a flower will be more magnificent, in the bouquet look richer. Try.

Astra - simple and original

If you need to do simple, but spectacular flowers from corrugated paper, try to make asters. They are made from corrugations of bright and pastel shades. Best of all, they look in the bouquet, and the colors can be different.

Cut the paper strip 8-12 cm wide, three or four times longer.
We fold the paper several times.

Simple Flowers Corrugated Paper - Astra
Cut into thin strips - a few millimeters wide (2-4 mm, as it turns out).
Fingers wound down the petals. Bending radius can be different, but the direction is approximately one. During the operation, the tape can not deploy and work immediately with several petals. So it turns out more believable. And, when assembling, it will take less time on laying petals.

This may happen a bouquet
Molded petals spin around wire / bamboo sticks. We try to make the petals that got closer to the center, wrap inside the stronger, those that turned out to be increasing with a smaller radius.
The base of the flower (uncut part) is filming, spinning around the stem, fasten with threads.
Using a narrow green strip, we draw up the base of the flower and stem.

Asters of corrugated paper can also be made of petals of different sizes - shorter closer to the center of the flower (there must be less), and longer on the periphery (more). You can bend them in one direction, and you can - in the opposite. As you like more.

Corrugated paper roses: step-by-step manufacturer algorithm (2 methods)

Flowers from corrugated paper themes and are good that they can be done in different ways. The material is very plastic, easily changes the form because there are several ways. Someone wants to achieve greater "naturalness", and someone is important.

1 method (natural view)

For roses from corrugation, it is better to choose a paper of two or three very close shades. So the type of flower will be more natural. For example, for a flower in the photo used white and strong paper. The number of petals of different shades arbitrary, as well as their placement in the bud.

This is what you should get: very beautiful flowers from corrugated

The procedure for manufacturing is:

Cut 8 small, 10 medium and large and 8 more super-large petals. The number of pure white and fasteners - in half.
From the green paper, cut out a long tape - wrap the stem, several (4) sheets - long and narrow, which in real roses are located below the flower.
Fingers give the petals rounded shape. From one edge of straightening, even slightly wrapping the edge back. From the other, on the contrary, twist.

Flowers from corrugated paper with their own hands: Making a rose
Wash the ribbon on the wire. If the flowers are used in the composition, leave approximately 1/3 without a tape - it will be so easier to insert them.
We take the smallest petal, tighten its bottom edge around the wire. He must wrap the stem completely. Petal will be almost crumpled. We apply glue on the bottom, we glue the next small petal. Approach of half press one to another tight. From the second row, the effort can be loosen a little - the bud gradually reveals.

Finishing steps
Next, in the same technique, add all other petals in order: medium, large and very large. When we glue large petals, each of them covers only half of the "stem" with the petals spinning on it.
The latter glue leaves.

As a result, we will get a beautiful rose from corrugated paper. In this version, it looks like a real flower. There is a simpler and fast way (in the photo below).

2 way (simple and fast)

Cut the paper strip of a paper width of 7-8 cm. You can make it uneven - on the one hand, on the other - wider. We fold it from the narrow edge of the "harmonica". The width of the "accordion" - 3.5 -4.5 cm. From the resulting stack on 2/3 height, we cut the petals.

On the wire (you can not wrap green ribbon) by screwing the petals starting from the narrow edge. As you screw down, you give the shape to them - we stretch on the one hand, approach the stem. By setting all the petals, fix them with a thread (simply wound some amounts of turns). Soring the petals by forming a bud.

You can make a rose from corrugated

From green paper, folding it with harmonica, cut out long and narrow petals. Note that their ends should be twisted, so that they should be not so narrow (noticeably 1 cm). Carved petals turn on the bottom, under the petals, twist the fingers of the leaves, after which we design the stem.

Corrugated paper peonies (with patterns)

For peonies, you need yellow corrugation - for core, green - for foliage, pink, cream, raspberry - for the flower itself. Wire or thin wand is suitable for the stem. Still need PVA glue.

These are the beautiful flowers from corrugated paper can have you

PION Corrugated paper is quite complicated for the manufacture of flower. It has a lot of different shapes of petals. Without pattern, it's not enough. But there are many peony varieties, so there are several patterns. We give two options. The first can be printed, cut and use as a template - it is given in a full-time image. The second option can be drawn with your own hands on the cells.

Pattern of petals of peony in full size

Piece of peeons, which can be painted independently on a sheet in a cell

Step-by-step manufacturing process with photo:

From yellow paper, cut out a strip of 4-5 cm wide and 10-12 cm long. Fold several times, cut the thin "noodle", leaving about 1 cm of the undeserted edge.
The resulting tape is rolling into a dense roller using a whole edge for this. It is lubricated with glue, and twist. It turns out a shaggy yellow hearter, around which the petals will be mounted. This middle is fixed on a wand / wire, which will be stem.

We start to make a peony from corrugated paper.
From paper cut out petals. The minimum number is 20 pieces (all kinds), but the more, the more fluffy the flower works. On the second pattern, the number of petals is indicated on each, an explanation is needed on the first. There are also numbers. This is the required number of petals.
Each petal stretch in the middle, not the touch edge, giving them a convex form. Do not strive to make them the same. It is not required. In the process, you can still stretch or click.
Folding petals start from the smallest. They are placed around the already available sequence. The first small petals are placed only a little overlapping their edges. The base is labeled glue.

Make the leaves that grow from the bottom of the Flower Cup
Next take medium petals. They are placed with a small approach of one to another.
Then stack big and the latter - very large leaves. Each layer we rinse with a small amount of glue at the base.
Leaves will also need. Cut them from green paper. On the one hand, they compress them, forming the petiole, with the other we are straightened in the middle, giving a curved shape (like a boat).

Piece Pattern Piece
Listers are fastened under a bud, flexing them down.
You can make leaves like a peony, but for this you will need a thin wire and several carved curly leafs. Residents on corrugated paper do not do, but they can be labeled.

What can happen
Each leaf is glued to the wire, wind the sticker with a thin strip, then fastened to the stalk.

The assembly process is a creative occupation
We take a long narrow band of green corrugated paper (about 1 cm wide, length - cm 20-30 - depends on the length of the stem). Watch the base of the flower, then smoothly go to the stem. At the end, fasten the edge of the glue paper.

PION Corrugated paper is ready. Usually they make a bouquet. When you do the following, do not strive to make them exactly the same. All flowers are unique in nature. Your too should be different.

This bouquet of paper peonies can be made with their own hands.

You can play with the dimensions and number of petals, mixing the petals of different shades, close in color. You can try paint to make darker petals at the base. In general, mass options.

Corrugated paper flowers: photo ideas, patterns

Using the methods described above, you can make any flower. The main snag is in the form, quantity and size of petals. The most important thing is the form. It is characteristic of each petal. The size is arbitrary. It is not enough that in nature the flowers are of different sizes, recently it has become fashionable to decorate the interior with gigantic growth colors. Original decoration, but specific. It is necessary to increase the basic patterns many times, it is difficult to work with a large scale. It is better for a start to practice in the colors of normal sizes, and then begin to large.

Vasilek make it easy and fast, but it looks wonderful

A little about patterns. They can not only find them. If it happens in the summer, take the desired flower, disassemble it on the petals. From the whole heap, select the most characteristic, attach to the sheet of paper, circle. Then the form must be corrected, taking into account the fact that it is still paper flowers. Finally, the pattern will take out the outlines after multiple samples and errors. Several paintings and master classes in the photo will post in this section.

Vasilki

The easier the flower, the more ways to do it. Corrugated paper can be done in different techniques. Examples - in the photo.

From afar and do not distinguish

Such petals cut to get flowers from corrugated paper as in the photo above

Another technique

If you want to make it very similar to this (and - pattern for the blooming flower, b - for bud)

Iris

The manufacture of iris from paper requires some fantasy. Very non-standard flower. The photo presents several techniques that allow you to achieve different effects. Some flowers simply resemble the original, some very much like it.