With the insulation of the walls and the outer decoration of buildings, ventilated facades were practical. For the northern regions of the design, it is convenient to carry out work in the cold season. When calculating vapor permeability of layers, facing is not taken into account. The gap between the outer plates and the insulation allows you to install any material. The dew point shifts to the surface of thermal insulation plates. Couple comes out, creating comfortable conditions in the house without air conditioning.
Installation of ventilated facades
Ventilated designs: types and differences
Hinged ventilated facades
Wall plastered has limited capabilities. It is difficult to mount on high-altitude houses. In frosts, shuttering is not done. Technology eliminates the possibility of using some materials. To protect outdoor walls of industrial buildings, business centers, supermarkets and public buildings, install ventilated facade. It fully corresponds to SNiP. Allows you to use aluminum and glass panels.
Installation of ventilated facades is made in two schemes:
- siding;
- Hinged systems.
Hinged ventilated Facade of Kermograph
Types of ventilated facades features fastening technology and decorative walls of the houses. InstallationStafasada in both cases is done on the crate. The insulation is stacked equally between guides. Siding is attached to the profile by self-draws. Between the plates are connected by locks.
The panels are hanging on the crate using kleimers to the brackets. Between them remains a small gap for thermal expansion of the material. It performs air conditioning features: stabilizes the temperature and ventilate air. Manufacturers produce panels for ventfassada from various materials, including aluminum. All products are suitable. On the walls of the private residential building, it is permissible to mount any ventilated facade. Alone easier to install hide.
Installation of insulation of ventilated design and cladding
Wooden ventilated facade
Article on the topic: Smoke and ventilation channels
The facing of Fassead of the house with brick and blocks of aerated concrete assumes the presence of the air conditioner in the main premises. The machine has poorly retains heat, and the dew point remains in the wall. So insulation requires forced ventilation. Otherwise, inside the house there will be stuffy. Device of the ventilated facade over insulation with brick and aerated concrete, displays a pair out. Facing reduces temperature and creates airflow.
Begin to install the ventilated facade follows from cleaning and preparation of outer walls, then the profile, subsystem and brackets. Between them is the insulation. The installation involves the location of the layers of the wall of the Multi-Building from the inside out.
- Interior wall decoration - wallpapers, paint, panels, plaster and possibly plasterboard.
- Laying brick or concrete panels, the inner part can be made of aerated concrete.
- Mineral wool insulation, VENT Facade Ecker or other composite plates.
- Frame for mounting insulation from fastening profile.
- Subsystems and brackets for installing facade plates.
- Aerial gap - natural air conditioning.
- Wandering at home.
Ventilated facade
For high-rise buildings, ventilated glass facades, aluminum panels, composite slabs are used. Installation is carried out by standard methods. Guides predominantly ismetallic profile, aluminum, with protective coating. Wooden rails are suitable for an individual and two-storey house. The subsystem, its dimensions depend on the thickness of the insulation. The bracket is installed in the locations of the connections.
Ventilated facade systems insulate high-altitude houses, protect the walls from the destruction and the creative architectural image of the building. Corps of air conditioners do not spoil the appearance of the structure.
In Russia and abroad, manufactured manufacturersEntrophasads of various types, including the Ecker of the VENT facade, mounted ventilated facade of porcelain stoneware, glass and aluminum panels and fastening to them. Technology is based on modern achievements. All manufacturers produce materials corresponding to SNiP and international sanitary standards. It is provided for an optimal microclimate indoor without installation of an air conditioner.
Article on the topic: Swing doors from a profile for giving - production and installation with your own hands
Creating a ventilated design of a brigade and independent
Wooden ventilated facade of a private house
The device of the ventilated facaded house has advantages over plaster. Fastening on the bracket allows partial repair of ventilated facades. Calculate the consumption of materials, the size of the volume, the length of the brackets and aluminumogoprofil can consultant in the store. You can contact him online. Proper wall decoration works better than air conditioner to create comfort in the house.
Each package of insulation and facing material is attached instructions for use, consumption of materials. Calculation can be done by looking at the size of the walls and plates. Accessories from the profile, subsystems and brackets are offered when purchasing. Kleimers can be removable and stationary, installation of mounted ventilated facades is done on concrete panels, masonry brick and blocks of aerated concrete. The bracket, its dimensions, create a gap that performs the role of air conditioner cleansing and refreshing air.
Ventilated facade of porcelain stoneware
The most environmentally friendly believes are:
- insulation technology, foam echrometer;
- ventilated glass facades with aluminum brackets;
- Ventilated facade of porcelain stoneware.
Materials do not distinguish harmful substances, do not have formaldehyde in their composition. The air inside the house is cleaner than from the use of air conditioner. Crachene can be mounted on aerated concrete and walls laid out by brick. Installation instructions correspond to SNiP. It allows partial repair of ventilated facades. You can see damaged aluminum and glass plates of facing or remove them and update the insulation, replacing it with plates from aerated concrete.
Eco-friendly insulation from the company Ecker
For ventilated systems, several types of insulation are produced, which successfully replaced the plates from the aerated concrete. The most environmentally recognized the Ecker of the Vent Facade. It varies in density. The main characteristics and dimensions are reduced to the table.| Nominal density | Thermal conductivity W / m * to | Compression strength, kPa | Dimensions, mm. |
| 70. | 0.035-0.036 | 10 | 50-250x600x1000 |
| 80. | 0.035-0.036 | sixteen | 30-250x600x1000 |
| 90. | 0.035-0.037 | twenty | 30-250x600x1000 |
| 120. | 0.035-0.037 | 25. | 30-250x600x1000 |
Article on the topic: Decorative stone in the hallway - styling secrets
Water absorption All plates of the foat echrode are the same, equal to 0.75 kg / sq. M. They are installed on ventilated facades from porcelain stoneware, under aluminum and glass panels. Installation can be done on aerated concrete. Writing with environmentally friendly systems without air conditioners. Air inside clean, optimal humidity for man.
The facade of glass panels is durable and look great
Ventilated facades of buildings
The creation of shockproof glass has opened up the possibility of creating unique buildings in avant-garde and techno styles. Ventilated glass facades can completely convert the face of the city, especially a specific home. Sizes of slabs from small, 50x50 cm, up to 3 meters. Their on the wall of aerated concrete and brick hold brackets and kleimers. Accessories profiles, dobors and subsystems are selected by the type of panels and weight.
By ease of design, aluminum panels are allocated with a coating of different types. Alternation of textures, glossy and matte surfaces of aluminum panels creates an original drawing. The rich color gamut makes the objects of the objects diverse.
Both types of finishes have a warranty period for more than 50 years. Easily repaired and repels dirt.