Wallpaper On the OSB plate, you must glue a competently oriented chipboard - not uncommon in the decoration finish. With it, it is most often equal and insulated walls, such plates create inner partitions and make more complex designs in the interior. Well, what to do next: leave the plates in this original form or still decorated? And how to decorate - probably stick wallpaper.
So is it possible to glue wallpaper on osbp
Actually, it is possible, but still competently blew the wallpaper without preliminary surface preparation will not work. Without this, it simply will not be a qualitative result. Well, the preparation itself is not so difficult.Preparatory work is as follows:
- All the docking sinks between the plates must necessarily need to be ribbon and sharply stick;
- Then the surface of the plate must be primed - it is impossible to skip this step, the primer is a multifunctional process, which, among other things, will improve the adhesion of surfaces;
- Then the surface is wrinkled again, the solution is applied by a trowel from top to bottom.
Before sticking wallpaper, it is necessary to conduct a preparation step
It is not recommended to skip the last stage, it practically guarantees that wallpaper, even the thinnest and fragile, will be good. If you still decided to do without a putty, to brand the surface of the plate will have several times. And wallpapers are taken only tight in this case. If you are putting off, be sure to drive the walls after putty again.
Competent approach: how to glue wallpaper on OSB
The blending of the wallpaper itself is also nothing difficult. First, the adhesive is mixed by the instructions. After that, you are spinning a roll, do measurements, cut off, smear the glue web (and the wall, if necessary), glue. In short, everything is standard. And remember that in most cases the roll will have to be twisted if you are reduced the drawing is important.
Article on the topic: The hatches for the bathroom under the tile - sizes, varieties and use
The glue on the canvas is rarely applied with a brush, a roller or cloth is usually used. Make as convenient for you - this is a matter of habit. You can purchase glue with a color indicator, it is usually pink, and it helps to see whether the surface of the canvas is well missed. On the wall, this glue will not shine, you can not worry.
Wallpaper sticking - the process is simple, the main thing is to do everything according to the instructions
Then the freshly adjacent canvas smooth up - either with a dry roller or a rag. Make sure that bubbles are not formed on the surface. As a rule, if the OSB plate is prepared, no inconvenience arises, everything is glued well, without any problems.
Is it possible to stick wallpaper on OSB plate without additional processing
In order to do without preparation, it is necessary that the slab surface is perfectly smooth. And for this there are serious obstacles. Yes, the plate surface looks pretty smooth and rivet, but it is only at first glance. Under the wallpaper, all the slightest protrusions will be visible. And if the wallpaper is thin or light, the wood structure of the slabs will definitely shine.
Wallpaper sticking on OSB plate without additional processing is possible only if the surface of the plate is smooth and smooth
In addition, over time, traces of paraffin impregnation and resin can take pictures on the wallpaper, which will reduce the aesthetic qualities of wallpaper.
It is also worth considering the environmental safety class of OSB plates. If the E1 class, it is impossible to glue the wallpaper directly on the stove. That is, it turns out that in any case it is impossible to glue the wallpaper directly on the slab. If only we are talking about liquid wallpaper, the structure and specificity of which is such that the surfaces that under them is simply not visible.
Article on the topic: Curtains on velcro - simple window decor
All stages: how to glue wallpaper on OSB plate
So, summarizing the said, it can be said that such a preparatory work is this important stage that will allow OSB to become an ideal surface for sticking wallpaper. The preparatory process itself consists of several points. It is desirable not to miss any of them.
Preparatory process is:
- Grinding;
- Primer under alignment;
- Sealing joints;
- Installation of reinforced grid;
- Alignment of the entire surface;
- Primer;
- Directly shook wallpaper.
Before starting the wallpaper, all preparatory work must be held
Slafts the plate is usually sandpaper. It helps to eliminate the woody pile, as well as a smooth outer layer of binding resins. The fact is that the impregnation has moisture-repellent properties, they worsen the adhesion of the primer with the surface of the slab, and therefore required mandatory grinding.
The primer solves several tasks at once: it creates the necessary moisture-permeable film, neutralizes the chip pattern, protects against the spots of the resin and paraffin, increases the coated base adhesion. It is recommended to primitive in two or three layers, used usually acrylic or latex primer.
When the plates are attached, compensation seams are left between them. It is reasonable to close these seams with silicone sealant, it is needed elastic. They can also wove the fasteners heads so that the traces of rust do not appear on the grounds. If you do not have silicone sealant, you can simply cover the oil paint fastener.
How to glue wallpaper on osb plate (video)
Then there is a process of sticking the reinforcing ribbon, stacking of joints and putty. Putclone is an aligning layer. Many avoid this stage, but it is not worth it, it affects the quality of sticking. After alignment, the surface is still ground again, and then you can already glue the wallpaper directly.
Excellent repair!