Wooden table with your own hands. Blueprints

I suggest you consider a small allowance for the manufacture of the wooden table with your own hands. Make such a table is simple enough. There are no complex elements here, only ordinary boards are used. As a result, you will get a nice table for giving, such as in the photo.

For the manufacture of the table, we will need the following tools:

• roulette;
• pencil;
• saw;
• Drill or screwdriver;
• level;
• Protective glasses and mittens.

Materials:

• board:

- 850x100x25 mm - 2 pcs;

- 1680x100x25 mm - 4 pcs;

- 950x100x25 mm - 17 pcs;

- 1530x100x25 mm - 2 pcs;

- 750x100x50 mm - 4 pcs.

• nails, screws, bolts;
• Glue for wood.

Now consider the drawings and the procedure for making a wooden table.

First you need to assemble the framework of the table, to which the boards of the tabletop and the stands of the table will be attached. The frame consists of four longitudinal boards with a size of 1680x100x25 mm and two end 850x100x25 mm. I exhibit longitudinal boards on a flat surface and to them using self-tapping and glue fasteners endboards. You need to monitor that the frame does not twist. To do this, it is necessary to periodically measure the diagonal.

From the sides, the additional boards 1530x100x25 mm, which will give extra rigidity and allow a little to hide the table of attachment of the table of the table.

Now we make a table top of the table from the board of 950x100x25 mm. Boards can be knocked out on nails, so fasten with self-draws. Between the boards you need to make a gap of 5 mm.

Fresh feet of the table. They can be attached to the screws or on the bolts, then they will be removable and the table can be folded and without any problems transport.

If you try well, you will get a wonderful table for giving, which can be installed on the veranda or in a gazebo.

Ideas author: Ana White

Article on the topic: Installing the cabinet door do it yourself