Have you ever seen the difference between the usual doorway and decorated with a special portal or arch? Agree, the latter is the best solution that you can come up with an original and neat door opening. I must say that all the work can be made with your own hands. To do this, it is enough to perform calculations, have the necessary amount of material in the hands, and for greater confidence, look at the photo and video materials on the topic.
Let's try to figure out what is necessary to organize the arch, how to make it with your own hands and what is needed. To do this, let's go in order.
Mounting process
Material
Let's deal with what material will be the most optimal.PVC
Arches from PVC can be done independently, you can order ready and install in the doorway. Our task is your own hands, it means, let's figure it out how it is done. So, there is a very large number of PVC panels. They are different colors and even sizes. They exist special profile and corners. The panels are attached almost the same as lining or panels from another material. The main method is a special castle of spike-groove plus profile.
In order to figure out how to make a doorway with an arch from PVC, first look at the opening yourself. In order, it turned out to perform the doorway by the arch, we look at the way. If there is an old box, it is necessary to dismantle it. The main thing is that the opening was clean.
So, after dismantling work, which, by the way, is far from uncommon, you can already make the arch in the doorway. We are talking about independent execution, so here you can do in two ways. If the arch in the doorway is rectangular, then it is not necessary to do the crate, it is enough to use a wall profile for PVC along with the corners. It is necessary to cut the panel correctly to get the desired width. After that, they must close the opening. Side parts can be fixed on the self-tapping screw, close the profile. However, such an arch is good when the walls are smooth.
Article on the topic: How to make repairs in the kitchen living room?
If there are problems with the walls, you can make the arch in the doorway using a preliminary crate. It can be made of wood, and maybe from metal. The choice is based on the possibilities and material of the walls.
From PVC, the arch of the doorway is done with their own hands in such a way, but it can be bought. Ready, as a rule, already has decorative elements, only the installation of the archer remains in the doorways. They can also be completed. Therefore, it is worth it to be determined at how much the doorways with arches will be in the house.
MDF
These are special panels, which can also be a wonderful material for the arch. Moreover, their width is 20-25 cm, it may well serve as the width of one part of the arch. It turns out, the panel is optional to cut. You can make the open from one-piece material. He will then look like a portal rather. In principle, the meaning is the same, the difference consists exclusively in the form of an arch. Of course, in the case of a semicircle, you will need to try to fulfill everything very carefully. With your own hands, such an arch can be done partly with the crate. Namely, a semicircular arch to do with a crate, and when the wall leave a place from the former door box, if it was extended. It then closes with panels and is a good item.
Lining
It can also be used for the arch, the material has a variety of varieties, it can be decorated, as you like, it looks organically, and most importantly, the natural is an excellent solution inside the residential premises.
Plasterboard
A common type of material, allows you to enter the arch organically in the opening, give it absolutely any form. It is also possible to perform with your own hands.More details
Of course, without the instruction will be difficult. But it depends first of all from the material, and then from the outlook itself. After all, not everywhere you can make a complex design. Some transitions do not allow this. Therefore, you can outline only general recommendations, but more to see on the video or photo.
- Preparation. To do this, do all the calculations, purchase the desired amount of the material plus 10% (this is a prerequisite, so as not to fall into the curious situation when it is not enough of literally a little bit, and the material will be removed from the implementation). It is also important to stock materials. All presented easily processing and practically everyone can apply the same tools.
- Building construction. Either this can be done in a schematic view on the outlook itself, or build a special frame from profiles. It will understand the format and size of the arch.
- Decorative finish. Very good when there is already a prepared frame. Then it will be easy to attach the finishing material and get a good result.
Article on the topic: Wall clock in the living room - 80 photos of the original ideas of design
Fasteners
We assign a separate place to fittings. You need to carefully choose mounts for different kinds of material. Basically, the tree is that the polymer is normally relate to self-stakes. But, for example, with PVC panels, it is necessary to calculate the force of the attachment, because too strong pressure can lead to the formation of unwanted cracks. The same applies to the tree. For the arch, it is better to choose a high class that is most stable. And also do not take the tree too dry. When processing, cracking is also possible.
It also applies to fasteners. For PVC and more subtle options for wooden panels, it is better to use not too thick screws that will easily include without damaging the material. In the case of PVC, by the way, it will be possible to fix the profile exclusively, and then use the existing panel mounting system.
However, it also needs to be clarified how smooth walls are in the opening. If everything is in order in terms of the level, you can simply mount the profile around the perimeter of the arch, and then insert the plates into it without fixing them. But if there is a very noticeable curvature of the wall, it is better to make a crate. And here the tree is suitable more: it is softer and better to combine with plastic.
So what is the instruction? Everything is simple: to properly select material, processing tools, watch examples in photos or video, comply with the proportions and safety technique.