In the present image, any detail is important. Especially beautiful belt. It does not come out of fashion, as it is capable of instantly turn a casual dress into an elegant evening version. The belt may be leather, woven and woven from different materials. Today we offer to sew a wide belt with your own skin hands. His advantage is universality. It will suit almost for any occasion - to a light dress, autumn coat or flood. As for the required material, it will be found at each needlewoman at hand. It is worth just searching in the mezzanine or a shoe closet - and here you can use the top of the old boots.
Required materials and tools:
- leather;
- the cloth;
- Wide belt for support;
- buckles;
- sewing machine;
- needle for leather;
- measuring tape;
- Portnovo needles;
- clamps;
- iron.
Cut the details for the belt
So, to make a wide belt with your own hands, be sure to use the needle for the skin. Remember, if you make a mistake and seam will be uneven, ugly holes will still remain on the skin. Therefore, mark on the material of the seams. First of all, cut off the belt to support a piece that will be 8 cm shorter than the girth of your waist. So if your waist is 68 cm, then cut off a piece of 60 cm. Cut a piece of leather with the same dimensions like a belt to support. Cut the piece of fabric, which will be wider than 4 cm and longer than 4 cm belt to support. Fold the edge of your fabric by 0.5 cm for the inside. Squeeze the iron throughout the perimeter of the fabric.
Sew the details and cut the belt
Inside the tissue of a piece of skin inside. Generate edges throughout the perimeter and secure clips from all sides. Stop along all sides on the sewing machine. Postpone the workpiece aside and print a template in full size. Cut from skin 4 such details.
Article on the topic: Popular women's models Coat: sewing patterns
Sew straps to the belt
Attach to both ends one part of the leather part. Repeat for the reverse side. Crerate parts with each other by clips. Stop on the sewing machine along all sides. Take short straps and make small holes at a distance of 3.5 cm from the top edge. Insert the cooked buckle into these holes, maintain the edges through the metal and secure tailor needles. Stretch on the sewing machine straps, turning them on the opposite direction. If necessary, cut off too much. Repeat for the second clasp.
We make stripes and fixtures
Cut from leather two strips of 7.5x1.5 cm. Wrap them around leather straps and make several stitches on the back. Make a few more holes for buckles on your belt. We made five more pairs of holes at a distance of 2, 5 cm from each other. Ready! Wear a wide belt made with your own hands, with pleasure!
