The original Russian bath is traditionally made of wood. Moreover, this applies not only to interior decoration, interior and bath accessories - the correct bath suggests the structure of the cut from this material itself. Accordingly, the builders should excite the question - than to process the tree in the bath to serve the longer and be comfortable and pleasant in it. The concept of "coating" includes chemical compositions, not only saving wood from mold, fungus, rotting and insects, no less important coatings providing fire protection - after all, a tree.
Since ancient times it is believed that the real Russian bath should be built of wood. For its additional protection, the logs must be treated with special means.
Before working and selecting means for processing surfaces in the bath you need to perform several conditions:
- Correct the wood;
- Flux devices and floor position Bathrooms also affect the coating;
- The purpose of bathrooms is the main question in the choice of "chemistry";
- take into account the degree of wear of the bath;
- Selection of special tools and tools for work.
Wood selection: Features
For the finishing of the steam room, it is unwanted to use coniferous wood varieties, since a resin is released at high temperatures, which is toxic.
For each room of a wooden bath, a certain variety of wood is selected - deciduous or coniferous. Coniferous boards are able to highlight the resin, which, along with a healing conifer, sends toxic substances, which do not contribute to health. It is necessary to remember - the coniferous tree of the tree in the bath is used in pre-babes or oil. In rooms associated with high temperatures (pair and furnace), it is impossible to use a cheva, only deciduous.
Article on the topic: Replacing doors in the bathroom and toilet do it yourself
And if such a rough mistake in inexperienced builders was committed, then the question is how to treat the tree, pressing. Conduct walls, the floor and the ceiling in the protective chemistry bath is categorically impossible - you can not leave the bath alive. Paints, olifa, wood varnishes and mastic with wax are contraindicated. The construction industry produces and non-hazardous chemistry for a bath. Just need to watch it be labeled as a "sauna".
You can use the harmless and environmentally friendly shedding method of processing - all the wooden coating is rubbed into 2 intake by vegetable oil. Only to do it with regularity - 1 time in half a year. Or another way - how to treat a tree for parillas - apply a soldering lamp for firing wood, and then the emery circle for surface grinding. This processing method is dangerous to fire and is not durable, but wood acquires a noble, beautiful view.
The correct position of the floor and plum is the pledge of durable tree coating
Floor and plum diagram in the bath.
Even when expensive high-quality material is used as a coating processing, it will not save the tree from the fungus and mold if the floor is in constant contact with water. It is caused by this can only be one reason - an incorrect flooring device and plots. Installation of the draft floor should be carried out in compliance with some inclination so that when pouring concrete, it can accurately copy the surface and direct the flow of water to the right direction.
Cutting floors in the bath are lined up exactly in terms of the level, forming a certain triangle of space with concrete or earth - water goes and wood dries and all chemical elements and coating treatment again in force. By the way, the floorboard, and all the wood is generally covered by an antiseptic from all sides, otherwise the benefit will not be. Washing rooms can be treated with a copper water solution with spraying, but to air before the immediate "launching to work" for a long time - 2 weeks.
Article on the topic: How to make a gate from a chain grid for giving - step-by-step manufacture
Purpose of premises in the bath
The pre-banker and wet can be treated with wax.
Premises with elevated temperatures need a thorough choice of coating. The heat is capable not only to treat, but also help harmful evaporations, fill the entire steam room or room with the furnace. It is best to listen to the advice of experienced builders who are not abused by chemical coatings, and more time devote the ventilation device in the bath. Then the tree will always remain dry, and the pair will not be mixed with chemistry, due to its absence.
Probanika and waters can be prepared on a water-based lacquer or wax. Of course, all materials must be certified. The current chemical industry offers water-based paints, especially for bathing the bath inside. The surface is beautiful, relatively safe, but extremely notesayev. And you should not wait from the wood of some special natural smells - their paints completely muffled.
Premises with furnace furnaces are better not to handle everything or only fire makeup.
There should be no couple there, and dry hot air will go to the tree only for the benefit. Of course, provided that the construction of the bath was carried out from the right and to the end of the dried material, otherwise the tree will crack.
Degree of wear
During the restoration of the old bath, it is usually covered with clapboard from the inside.
It happens that the old bath is not from handling - she has long gave the shrinkage, showed her good, and not very, qualities, became his native. Therefore, the owners want to just renovate and continue to enjoy further. The restoration lies in the lining of the latter with lining and "podsham" outside.
Minus here is only one - the use of coating antiseptic, varnishing and antifungal agents will have buckets. For the tree has become porous, absorbs everything in huge quantities. The question is - than to process the tree of the old bath - unanswered. It makes no sense to cover any old structures - Restoration, update and processing is carried out only by mechanical method - grinding, polishing and rubbing oils.
Article on the topic: how to make a campaign shower with your own hands
Overalls and coated tools
When processing wood, any chemical solution necessarily wear a respirator.
Overalls should include:
- Respirator or on the extreme case of moisturized gauze bandages, which change through every hour of work;
- The costume is desirable, but the home masters are not puzzled;
- Rubber gloves with a corrugated side are required;
- Protective shoes.
From the tools you will need:
- Container for breeding covering compositions - varnishes, paints, mastic and olifa. They are also convenient to use if the roller is selected as a nanoscope.
- Brushes are wide and narrow, for hard-to-reach places. With such a problem, the manual paintopult will work perfectly - the surface will be covered perfectly.
- Pumice to strengthen the entire surface before the coating. Solvent or other output of non-accurate strokes.
In conclusion, you must say about the outside of a wooden bath. The technology of coating external ones differs little, it is possible, for example, to use oily or acrylic paints.