For the manufacture of the bed we will need:
- plywood and wooden boards;
- edge ribbon (PVC edge);
- glue;
- paint;
- Grinding sponge;
- screwdriver;
- clamp;
- ruler, pencil, roulette;
- iron.
Bed drawing
Before proceeding to the manufacture of bed, you need to have an idea of what we will do. Therefore, it is previously necessary to make a drawing of the bed or use already available. For example, on our website Postroy-sam.com ( To enlarge you need to click on the picture).
Build bed
Before casting Phaneur needs to decide on the size of the bed, and rather with the standard sizes of the mattress. The drawing shows an example of a single bed. If you wish to make a double bed, then you need to zoom in accordance with the mattress.
We carry out the cutting of plywood according to the drawing.
The ends of individual parts need to be stuck with the edge ribbon. This can be done with the help of an ordinary iron.
A few minutes later the surface will cool. Excess ribbons need to be trimmed, and the edges are treated with a grinding sponge.
When all the details are harvested, you can start assembling. By the way, the cutting of plywood can be ordered in the furniture workshop in advance of the specification.
Before twisting the parts, it is necessary to apply glue and only then twist with self-draws.
Where you need to stick the edge ribbon and process the edges.
You can now paint the bed in any color that perfectly fit into the interior of your bedroom. You can also open the details of the veil and cover with varnish.
Next, proceed to the manufacture of the central part of the bed, on which the bulk of the sleeping person will have. For this purpose, we will need pine boards. First of all, the guides, which later lie down the transverse boards.
Article on the topic: Crafts from plastic pipes PVC (38 photos)
Krepim Mattress Limits. They can be made from the same plywood.
With the help of furniture bolts, we attach a headboard bed to the main frame.
We put the transverse boards to the guides. The distance between them should be no more than 10-15 cm so that the boards are not broken under the weight of the sleeping person. The bed is moving to the wall and put the mattress.
Bed from plywood is ready. Now we know how to make a bed with your own hands and quickly. All pleasant rest!