Each fashionista should have a small handbag in his wardrobe. Now at the peak of fashion stylish clutch bags. Such an accessory is perfectly suitable not only for the evening along, but also to the everyday image. Clutch will complement your image and emphasize the individuality. It is not necessary to buy a handbag to a new dress, you can sew a beautiful clutch on the lightning with your own hands.
Required materials and tools:
- ½ meters x 138 cm wide cotton fabric for the main part;
- ¼ measureer x 138 cm wide fabric for exterior and strap;
- ½ meter 112x 115 cm wide cotton lining fabric;
- ⅝ meter x 51 cm flax;
- decorative zipper 56 cm long;
- Ring for the strap;
- Threads, appropriate fabrics;
- threads of contrasting color;
- transparent line;
- chalk;
- scissors;
- Iron and ironing board;
- Portnovo needles.
Cut the details for the clutch
So, to sew a clutch on a zipper with your own hands, cut the following from the main tissue: one rectangle 22x41 cm for the top, then it is necessary to cut this piece into two parts 9x41 cm and 13x41. One rectangle for pocket 15x17 cm, one rectangle for rear top 20x41 cm. From the fabric for the bottom panel and the strap, cut the following: two rectangles 10x41 cm, one band for the strap 7x72 cm. From the tissue for lining, we cut out such parts: one rectangle for the top 9x41 cm, one rectangle for the bottom 20x41 cm, one wide rectangle for the back 28x41 cm, one rectangle for the inner pocket 28x20 cm, one rectangle for the front pocket 15x17 cm. From the interfaces, cut the following: one rectangle for the top 9x41 cm, one rectangle 13x41 cm, one rectangle 20x41 cm, one strip for a strap 2.5x72 cm. Bind the iron all the details for which the lining is required.
Article on the topic: Owl with knitting with a scheme and description: Master class with video
We sew strap
Find a piece for the belt and lining. Fold the detail in half, the front sides together and start a fold. Bend side sides inside and start up again. Insert inside the lining and push along the long edge. Cut from the 8 cm strap, it will be necessary for you to create a loop.
Front and rear panel
Take two details of 13x41 cm and 10x41 cm. Fold them together by the facial sides and step up along the long side. Open the seams. Stretch on the front side along the first seam. Take the back of 20x41 cm and the remaining 10x41 cm, fold them together along the long side, the front parties together. Stretch on the sewing machine on the wrong and front side.
We sew pocket
Prepare a piece of lining for pocket 28x20 cm and fold in half the front faces together. Street along all sides, leaving a small hole. Cut the corners and remove on the front side. Generate the edges of the opening inside and step on the typewriter. Take the lining of 28x41 cm and attach a ready pocket to it. Stretch on the sewing machine along three sides.
Send lightning
Take the lower front part of the outer panel and place the front side. Cut from lightning excess fabric. Attach the zipper to the cloth down the top edge to the edge of the front part. Disseminate zipper. Attach the lining face downside down. Stretch on the sewing machine throughout the panel. Find the detail of the iron. Repeat these actions to sew a zipper to the second part of the front and lining. Bind the iron and strive along the lightning on the front side. Hand stitch mark the end of the zipper and cut out too much.
Exterior pocket
Find an external pocket 15x17 cm and place it face up. Attach to the upper edge of zipper to the cloth down for its top edge. Street as close as possible to the tooths. Attach the front side of the lining for your pocket and secure the lower edge of the zipper on the lining bend, as shown in the photo. Stretch on the sewing machine. Fold the lining parts and pockets together and step on the sewing machine, leaving a small hole. Remove on the front and squeeze the hole. Place your pocket on the external detail, as shown in the photo. Stop pocket with zigzagochucho suture along three sides. Attach a loop with a ring with a ring, as shown in the photo and step on the sewing machine.
Article on the topic: Hook orchids with schemes and descriptions: Master class with video
Clutch assembly
Fold together the front part with an open lightning face. Place the rear panel down so that the front parties are together. Put on top of the lining face upstairs and push along four sides. Sun strap to the loop, as shown in the photo. Lightning clutch is ready!
