Power table for sofas with their own hands

Anonim

Power table for sofas with their own hands

You can make a convenient attached table for the sofa alone. In size, it is small and ideal for working on a laptop or reading a book, magazine. It will not require a large number of materials, but the skills of working with a tree will be useful.

Materials

To make an appropriate sofa table with your own hands, prepare:

  • 5 x 10 cm boards;
  • Boards for tabletops (walnut);
  • wooden plugs;
  • paint for wood;
  • Putty for wood;
  • varnish or veil;
  • deck screws;
  • ribbon saw;
  • Fantasy saw;
  • grinding machine;
  • drill and drill;
  • brushes;
  • putty knife.

Step 1 . The boards of rectangular sections that will be the basis of the table, you need to cut into seven parts. The length of six pieces should be 35 cm and one - 60 cm. The last part will determine the height of your table. If necessary, it can be changed.

Step 2. . All boards will need to be cut off at an angle of 45 degrees, but in different planes. How exactly they will be located, you can see in the photo.

Power table for sofas with their own hands

Power table for sofas with their own hands

Power table for sofas with their own hands

Step 3. . Preparation of boards, carefully polish them. Round the face.

Power table for sofas with their own hands

Step 4. . Collect the base of the table from the boards. Bold them with deck screws, pre-harvesting the holes using drill and drill.

Power table for sofas with their own hands

Step 5. . Collective table and making sure that all the details are fitted for sure, get the screws and collect a table again, adding joinery glue to fasteners. Secure the design of the clamps in this form until complete drying of the glue.

Power table for sofas with their own hands

Power table for sofas with their own hands

Power table for sofas with their own hands

Power table for sofas with their own hands

Step 6. . Places of holes under the fasteners, close the plugs, and treat the putty.

Power table for sofas with their own hands

Power table for sofas with their own hands

Step 7. . Sand the surface of the base of the table.

Power table for sofas with their own hands

Step 8. . Boards for tabletops glue together using clamps and carpentry glue.

Power table for sofas with their own hands

Step 9. . After drying the glue cut out some of the table top. Be careful when removing the measure, some of the nuts must fit tightly into the base.

Power table for sofas with their own hands

Step 10. . Having done a tabletop, process the joints of the joints with a putty for a tree and after drying it to sink this site.

Article on the topic: Openwork hook for a girl and for full ladies: Schemes and description

Power table for sofas with their own hands

Power table for sofas with their own hands

Power table for sofas with their own hands

Step 11. . Cover the table with varnish or verse. If desired, part of it can paint the paint of a contrasting shade.

Power table for sofas with their own hands

Power table for sofas with their own hands

Picky table ready!

Read more