When choosing doors, everyone will focus on quality, price, model design. For each room, various doors are needed, so products as economy-class and premium class are widely represented on the market.
Door premium class
There is a certain category of consumers for both one and for another class: for example, for a suburban mansion, which is luxuriously furnished, premium-class designs - the required element.
And for the state institution of the premium model, there will be an unjustified waste, for such premises, the situation and use is much better suitable for economy class.
In terms of its characteristics, these two classes differ quite strongly, so consider them in more detail.
Consider the input metal doors, the main characteristics for them:
- Security - This parameter demonstrates how high-quality and long the entrance door can resist hacking. It is also worth noting the stability of the door to fire;
- Supportability - such characteristics such as excellent sound insulation and heat-conductivity are very important;
- Reliability - quality is determined by the service life of the structure, ease of use and protection against any breakdown;
- The aesthetics of the door is important elements in the interior of the room, so they must speak appropriately with the situation.
These qualities are very important when choosing an input or interior door. It happens that some parameter is expressed more than the rest, for example, the models are reliable and comfortable, but the manufacturer did not think over the design, so they are too simple and unpleasured against the background of the rest of the less expensive doors.
It happens that the manufacturer has developed an excellent design, but security and reliability parameters are much worse than whether such models do not fulfill their direct purpose - the placement of the room, and they act only with a decorative element.
Of course, the interroom and premium-class input structures are much more expensive and better, but the economy class corresponds to minimal requirements and does not hit the pocket.
Article on the topic: varieties and rules for mounting filters of rough water purification
Technical differences in entrance doors
Metal economy-class entrance doors more often include the following elements:
- foammetics;
- steel, occasionally PVC platband;
- rubber compressor;
- Material for insulation - foam, mineral wool, paper honeycombs, foam;
- ribbiness;
- Steel sheet, usually thickness 0.3-2 mm.
Regarding pricing policies, entrance doors Economy class can be divided:
- From 80-150 $ - low-quality doors. More often is the door of the Chinese manufacturer. Metal thickness of the door box ranges from 0.4mm to 0.8mm. Metal thickness The door itself is more often 0.3mm-0.6mm. The doors of paper cells, mineral wool or foam are insulated. The fittings also set the Chinese manufacturer, the "Spider" system is most often built. This protection system is 4-8 rods, which leave all the edges of the door and enter the box, thereby they do not allow knock out the door. The main task of such doors will be the protection of the room in combination with a low price. But their models are simpler, and quality meets minimal standards;
- From 150-300 $ - the doors are significantly higher quality. We are more often produced by domestic plants. As a rule, the metal thickness of the door from 1mm-2mm. Heated with foam or mineral wool. The door coating is predominantly hammer, powder paint. Mechanisms are installed more expensive, respectively better. Perhaps the addition of MDF with lining or mirrors. Also included the MDF platbands are attached, which are attached separately from the door.
Due to the observance of all techniques and technologies in the production of economy-class doors, they have a good heat and sound insulation, effectively prevent various unpleasant odors.
The premium class can include such steel doors that differ in the following qualities:
- Original design for each model design. Almost all models are performed by individual measurements and wishes of the customer. Popular doors with MDF lining. Such linings can be used both from the inside and from the outside of the door. For a street door, an additional vintari film is possible on the MDF overlay. Such a film protects products from the harmful effect of atmospheric precipitation.
- High quality used materials and mechanisms. Also individually chosen castles, pens, knobs, eyes. Dear and high-quality components of famous manufacturers firms are used. Metal thickness usually ranges from 2mm and more. Possible assemblies from the sheet metal and the profile tube. Used high-quality insulation - foam and mineral wool.
- The price is proportional to the quality. Varies from $ 300 or more.
Article on the topic: Daewoo washing machines and malfunctions
But metal doors belonging to the premium class are much less wearing, can provide greater safety, differ in good exterior trim.
Technical differences in interior doors
Interior doors Premium and economy can be divided by basic materials.
- Wooden - doors collected from different wood species. Economy class should attribute the door with low quality wood - knocked, collected from several parts. Also, the quality of the assembly can be low - cracks on the joints, poorly ground door plane. The premium class is more commonly used expensive wood species, such as oak, deification, beech and others. Usually, such doors are already painted and ready for installation, and under the order are performed. Possible inlays of metal elements.
- MDF Door. Such doors can be attributed to the economy class. More often it is simply white, primed under the painting of the door. There is also an assortment with a laminated film under the color of cherries, nuts, pines, alder, wenge and other colors. The cost of such doors is not high, but MDF has a number of restrictions on functionality. The coating is very susceptible to moisture and doors can easily "appear", to peer paint.
- PVC - more often the doors of the premium class. The frame is assembled from high-quality wood, which protects the design from the deformation. The film, which is covered with the door of moisture-proof, can be used in the bathroom and does not worry about the safety of the material.
- Veneered - premium doors. The frame, as in PVC, is collected from high-quality wood, a solid wood cooker is not rarely used. The design surface is covered with veneer, which is a cut of the upper layers of wood. Popular oak and nut sections. The veneer is fixed on the door frame at the expense of a specially industrial iron. An example of a veneer door can be seen in the photo.
Manufacturers may even develop an individual design of inlets and interior doors using the photo of the customer's interior.
Article on the topic: For which the guide headlock guide profile is used